Categories

Best Wood For Floor Joist

Squeak Ender 2084 Hardwood Floor/Subfloor Squeak Eliminator Brackets - Quantity 9

  • Quantity of (9) : Squeak Ender Floor Squeak Eliminator Brackets # 2084.
  • Quickly and permanently eliminate annoying wood floor squeaks.
  • This kit installs from beneath the floor and works by pulling the loose sub-floor tight to the joist ..
  • Each Kit Includes (1) 4" adjustable floor joist bracket, (1) 2" square floor anchor plate, (1) 1/4-20 x 6 inch carriage bolt, (1) 1/4-20 hex nut, (1) 1/4 washer and (4) #10 x 5/8" sub-floor wood screws.
Check Stock

vikofan 4PCS Joist Hangers,4x6\ Black Joist Hanger Fit for Beam/Swing

  • High strength joist hangers: designed with high hardness Q235 steel plate structure and anti-rust coating. It has anti-deformation, anti-scratch and corrosion resistance properties. Can withstand all kinds of bad weather year after year, thus forming stronger and longer lasting joists..
  • Fits 2" x 4" lumber: Package includes 24 joist hangers, 48 self-tapping screws and 192 wood screws. Note: If you need to mount the hangers on concrete or steel pipe, please replace the screws with other types yourself (not included)..
  • Wide range of use: can be used in roof, deck, floor, swing set, handrail, fence and other wooden structures. Perfect for home, garden, amusement park, barn construction..
  • 3-step installation: 1. First fix the joist hanger on the top beam 2. Insert the cross timber into the joist hanger 3. Use wood screws to fix the cross timber..
  • Thoughtful service: If you have any questions or dissatisfaction about our products or services, please contact us by email. We will give you a satisfactory reply within 24 hours..
Check Stock

Trex Protect Beam Butyl Tape 3-1/8\ x 50'

  • Protects the top of the joist, rim joist and ledger board from development of rot and wood decay..
  • Helps deck screws hold longer and stronger..
  • Acts as a barrier between wood and galvanized metal such as joist hangers..
  • Seals deck fasteners and prevents moisture penetration..
  • Eliminates splitting from freeze and thaw..
Check Stock

6PCS 4x4 Post Anchor Base, Wood Fence Railing Post Bracket (Inner Size: 3.6 x 3.6 Inch), Heavy Duty Metal Post Sleeve with Screws, for Deck Porch Railing Support Trim Pergola Mailbox Mount Kit

  • Fit for 2" x 4'' Lumber Hanger: Product Size: 2"L x 1.8"W x 3.7"H/ 51 x 45.5 x 94 mm. Our concealed joist hangers accommodate standard 2" x 4" lumber on the market(it also fits for wood of 1.6"-2"/ 40-50 mm width). Concealed-flange brackets feature straight edges for joist connections, and provide cleaner lines for visible applications to match your decor..
  • Sturdy Steel Plate Structure: Plate thickness: 0.08"/ 2 mm. The outdoor accents concealed-flange is constructed with strong-hardness steel to keep away from deformation and scratch. Black powder-coated finish withstands the elements year after year and won't rust, corrosion in all seasons and climates..
  • All Needed Accessories: Quantity: 24 PCs. Each concealed joist bracket included 2 self-taping screws and 8 wood screws. Having all needed connector screws can be cost-saving and time-saving on your installation. Note: If you need to mount the hanger on concrete or the steel plate, please change other tough screws (not included)..
  • No Pre-drilling Installation: Item weight(each): 0.5 lbs/ 0.22 kg. The lightweight 2 by 4 joist hangers can be easily and quickly installed by yourself alone. The installation step is to mount the joist on the header beam, slide the ledger ends into the joist, then tight....
Check Stock

LukLoy 2x4 Joist Hanger 20 Gauge Galvanizing Face Mount Joist Hangers for Wood 10 Pack

  • ✅ HEAVY DUTY - LukLoy 2x4 joist hangers are made from 20 gauge galvanized steel for extra rust and corrosion resistance, creating a stronger, long-lasting joist-to-header connection..
  • ✅ MULTI USE: The joist hanger is designed for joist-to-header installation in wood-framed constructions like roofs, decking, floors, and ceilings. Joist hangers are much stronger than using nails or screws alone. They are also easier to fit and relatively cheap given the length of time they will last..
  • ✅ Easy Install: This joist hanger has speed prongs to temporarily position and secure the connector for easier and faster installation..
  • ✅ SIZE: For nominal lumber 2 x 4 (actual size 1-1/2″ X 3-1/2″), The package includes 10 pieces joist hangers..
  • ✅ 2 YEARS REPLACEMENT GUARANTEE! - If you have any questions or dissatisfaction with our products or services, please feel free to contact us by email, we will give you a satisfactory answer within 24 hours..
Check Stock

4 Pcs Split Joist Hanger Structural-Connectors Face Mount All 6 Face Mount Joist Hanger 16 Gauge Hot Dip Galvanized Finish Steel Joist Dimensional Hangers

  • Material :Carbon steel Q235B , hot-dip galvanized surface treatment, good impact resistance, wear resistance, corrosion resistance.
  • Split Joist Hanger are designed to provide support underneath the joist, rafter or beam to provide a strong a connection.Suitable for all sizes of wood.
Check Stock

Joist Tape for Decking 50 Feet Deck Flashing Tape Joist Protection Tape Butyl Joist Tape for Joists and Beams, Preservative Waterproof Deck Joist Tape, Black (1 Roll,1-5/8 Inch Width)

  • Package Includes: you will get 1 rolls of 1 to 5/8 inch x 50 feet black joist tapes, the length is enough to meet your needs, and you can cut it for your needs, such as deck, joist, beam, wood, metal and more.
  • Waterproof and Long Lasting: the joist tape for decking is made of quality butyl, waterproof and sunproof, not easy to break or deform, you can apply them to repair cracks of wall, water seepage in bathroom, kitchen and so on.
  • High Ductility and Strong Adhesion: our butyl joist tapes are self adhesive and extendable, convenient and save your times and efforts.
  • Easy to Install: you just need to clean and dry the surface, and then use our butyl joist tape to stick the place you want, finally press firmly.
  • Weather Resistance: the butyl joist tape is suitable for use in temperatures ranging from -40 degrees Fahrenheit to 240 degrees Fahrenheit degrees, which fits for most of weather conditions.
Check Stock

O'Berry Enterprises Counter-Snap Kit Replacement Screws - - Part # 3253 (Metal)

  • This kit contains qty 50 screws are for stopping squeaks between or on the joist..
  • Plus one driver bit and easy to follow instructions..
  • Using this kit stops the movement of floor boards and squeaks..
  • The screw is scored so when driven through the fixture it snaps 1/4" below the top of the hardwood..
  • The small hole then can be filled with a wood filler to conceal the screw..
Check Stock

AKRON PRODUCTS C-4 Floor Jack, 1 Pack

  • ...h (36.8-47 cm) overall lifting shore height.
  • 3.5x6 inch (8.9x15.2 cm) base plate with (4) 0.6-inch/15mm and (2) 0.3-inch/8mm mounting holes.
  • [Built to Last]: Constructed from coated steel for strength and longevity that resists rust and corrosion.
  • Square tube, round tube, and threaded plate welded to create singular floor joist jack post unit.
  • Load capacity up to 24,700 pounds / 12.4 ton (11,204 kg / 11.2 MT) dependent on 4x4 used.
  • [Stabilize Easily]: Place adjustable shoring jack on end of 4x4 inch wood post, secure post to shore jack, turn the tension handle for 4 inches of height adjustment, and secure 4x4 shore jack base (4x4 lumber required, not included.
  • nails/wood screws recommended, not required or included).
  • [Fit Anywhere]: 11.8x0.4 inch (30x1 cm) horizontal tension handle is removable and slides for use against an obstruction.
  • Base plate includes (4) 0.6-inch/15mm and (2) 0.3-inch/8mm mounting holes spaced 4.5 and 2.25 inches (11.4, 5.7 cm) apart (center to center) for securing to floor (screws not included).
Check Stock

Simpson HCKWSV134S Strong-Drive® WSV SUBFLOOR Screw Collated — #9 x 1-3/4 in T25 Yellow Zinc 1000-Qty

  • Redesigned tip and thread pattern provides easy starts and up to 25% less torque while driving — makes for up to 20% faster driving. Less installation torque also means less wear on tools.
  • Deep 6-lobed recessed ribbed head provides clean countersinking and more secure bit retention for fewer cam-outs. The holding power of WSV screws reduces the gaps between the joist and subfloor that cause floor squeaks.
  • WSV screws can be easily backed out, allowing for future access to floor cavities. 6-lobe T25 drive bit (included).
  • Dual-evaluated under ICC-ES AC233 and AC120 for wood-frame subfloor fastening. Length: 1-3/4 in..
  • Yellow zinc coatings are applied in accordance with ASTM F1941. Quantity: 1,000.
Check Stock

Simpson HCKWSV2S Strong-Drive® WSV SUBFLOOR Screw Collated — #9 x 2 in T25 Yellow Zinc 1000-Qty

  • Redesigned tip and thread pattern provides easy starts and up to 25% less torque while driving — makes for up to 20% faster driving. Less installation torque also means less wear on tools.
  • Deep 6-lobed recessed ribbed head provides clean countersinking and more secure bit retention for fewer cam-outs. The holding power of WSV screws reduces the gaps between the joist and subfloor that cause floor squeaks.
  • WSV screws can be easily backed out, allowing for future access to floor cavities. 6-lobe T25 drive bit (included).
  • Dual-evaluated under ICC-ES AC233 and AC120 for wood-frame subfloor fastening. Length: 2 in..
  • Yellow zinc coatings are applied in accordance with ASTM F1941. Quantity: 1,000.
Check Stock

Tavool Stud Finder Sensor Wall Scanner - 4 in 1 Electronic Stud Sensor Beam Finders Wall Detector Center Finding with LCD Display for Wood AC Wire Metal Studs Joist Detection

  • ...Live AC Wire. Whether you are a professional, homeowner or a DIY enthusiast, you can find great use in this electronic stud scanner.
  • 4 IN 1 Multiplication Plus Deep Detection - This digital wall scanner includes four different scanning modes for woods, beam, joist, metals, AC wires and deeply embedded objects behind floor, ceiling, wall. Stud mode detects wooden beams and joists in drywall up to 1.2 inches. Metal mode detects pipe , rebar, aluminum and copper up to 1.57 inches.Deep mode detects wood and metal parts located up to 1.77 inches while 85~240 volt AC current for voltage and live electrical lines up to 2.36 inches.
  • Upgrade Design of LCD Screen - Displaying the Desired Stud Material As Well As the Precise Position of the Stud - The Tavool digital stud scanner features large LCD display together with the big sound to detect the accurate location of stud metal Ac wires. When find the material, the LCD display will indicate the direction and the intensity of sound tells whether you are more close to the target. The fast detection saves users time and efforts, making the task completion EASIER.
  • Automatic Calibration and Ergonomic Grip for Comfortable Use - Turning on the stud finder and Completing Calibration. The automatic calibration before using....
Check Stock

4 Pcs 2x4 Concealed Joist Hanger Fit Actual 1.9 x3.5 Outdoor Concealed-Flange Light Joist Bracket Q235B Steel Powder-Coated Concealed Face Mount Joist Hanger for Beam Swing,Fence,Handrail

  • FIT: Concealed joist hanger fits perfectly on 1.9" x 3.5" lumber (ALSO FITS FOR WOOD OF 1.5"-2"/ 38-50 mm WIDTH). For rough cut measured lumber, not nominal..
  • ACTUAL SIZE: 2-1/5"(L) x 2"(W) x 3-3/4"(H). Thickness: 3 mm. Two types of prepunched hole size: φ5 mm (6 pcs), φ8 mm (2 pcs).
  • STURDY MATERIAL: Heavy Joist Hanger Bracket is made of heavy duty steel, smooth look, coated with black powder to prevent rust and corrosion outdoor in all seasons and climates..
  • SPECIAL DESIGN: The holes on the concealed joist bracket are deliberately offset, so you can put in one screw from each side without hitting the other screw, make it stronger..
  • WIDELY USE: Concealed-flange joist hanger bracket can be installed close to the end of the beam, swing, fence and handrail as a stable support kit. Perfect for indoor or outdoor usage, such as home, garden, barn etc, match your decor..
Check Stock