Categories

Best Wood Plastics

3M Fastbond Contact Adhesive 30NF, Neutral, 1 Quart Can

  • Bonds most foamed plastics, plastic laminate, wood, plywood and canvas to themselves and to each other.
  • Creates a very high strength, high temperature resistant bond with up to a four hour bonding range.
  • Adhesive can be applied by spray, brush or roller.
  • Bonding, adhering, gluing, joining and attaching.
  • Creates a very high strength, high temperature resistant bond with up to a 4 hour bonding range.
Check Stock

3M Fastbond Contact Adhesive 30NF, Green, 1 Gallon Can

  • Bonds most foamed plastics, plastic laminate, wood, plywood and canvas to themselves and to each other.
  • Creates a very high strength, high temperature resistant bond with up to a four hour bonding range.
  • Adhesive can be applied by spray, brush or roller.
  • Bonding, adhering, gluing, joining and attaching.
  • Creates a very high strength, high temperature resistant bond with up to a 4 hour bonding range.
Check Stock

3M Fastbond Contact Adhesive 30NF, Neutral, 5 Gallon Drum (Pail)

  • Bonds most foamed plastics, plastic laminate, wood, plywood and canvas to themselves and to each other.
  • Creates a very high strength, high temperature resistant bond with up to a four hour bonding range.
  • Adhesive can be applied by spray, brush or roller.
  • Color changes from white to clear when dry.
  • Creates a very high strength, high temperature resistant bond with up to a 4 hour bonding range.
Check Stock

J-B Weld Pro Size ClearWeld 5 Minute Set Epoxy

  • J-B WELD CLEARWELD PRO SIZE: Same formula as the J-B Weld ClearWeld, just in two 4oz tubes! ClearWeld is a clear, quick setting and multipurpose two part epoxy that provides a strong and lasting bond on surfaces including metal, tile, most plastics, ceramic, glass, wood and more!.
  • CURE AND SET TIME: After mixing at a ratio of 1:1, it takes 5 minutes to set and 1 hour to cure. ClearWeld is designed to cure with a clear, transparent bond when used at thicknesses of less than 15 mil..
  • STRENGTH: J-B Weld ClearWeld has tensile strength of 3900 PSI..
  • SURFACE APPLICATIONS: Glass, ceramic, tile, plastics, concrete, wood, metal and more..
Check Stock

Hi-Spec 130 Piece Multi SAE Drill Bit Set. 11 Sizes 1/16in to 3/8in. Metal, Woods, Plastics, Dryall, Brick & Concrete Drilling with HSS Titanium, Masonry & Brad Point Steel Bits. Complete in a Tray Case

  • DRILLING AIN’T EASY: Drilling quickly and accurately into different materials requires choosing the appropriate drill bit type. Get it done right with The Hi-Spec Multi Metric Drill Bit Set. The perfect complement for those everyday drilling jobs in wood, plastics, metal, drywall, masonry, concrete and brick.
  • 78 HSS BITS: High-Speed Steel (HSS4241) round-shank twist drill bits, stronger than normal high-carbon steel, for most metals, wood, drywall and plastics. Titanium coated for wear resistance and reduced friction. Sizes 1/16, 5/64, 1/8, 5/32, 3/16, 1/4, 5/16, 3/8”.
  • 26 BRAD POINT WOOD BITS: Their sharpened edges easily cut and churn out wood, drywall and plastics. Also known as spur point bits, piercing tips allows for non-slipping and accurate starts. Sizes 5/32, 3/16, 15/64, 5/16, 3/8".
  • 26 MASONRY BITS: Super hard Tungsten-Carbide YG8C tips ensure longer-lasting strength against brick and concrete by breaking up stone and masonry particles in combined hammering and drilling action. Sizes 5/32, 3/16, 15/64, 5/16, 3/8”.
  • KEEP IT TOGETHER: Bits come wrapped in bags, not loose. A slim storage tray case keeps bits in separate compartments with a clear plastic insert to prevent movement. Sizes are printed on the case lid underside and its steel catch....
Check Stock

BarePaint - Conductive Paint (50ml)

  • Creates durable, reliable, conductive connections.
  • Adheres to plastics, epoxy, copper, aluminum, ceramics, wood, and most electronic substrates as well as ABS, PLA, and other 3D printing plastics.
Check Stock

MG Chemicals 841AR-P Nickel Conductive Pen, 7.5g

  • Creates durable, reliable, highly conductive connections.
  • Adheres to plastics, epoxy, copper, aluminum, ceramics, wood, and most electronic substrates as well as ABS, PLA, and other 3D printing plastics.
Check Stock

MG Chemicals 842AR-P Silver Conductive Pen, 8.6g

  • Creates durable, reliable, highly conductive connections.
  • Adheres to plastics, epoxy, copper, aluminum, ceramics, wood, and most electronic substrates as well as ABS, PLA, and other 3D printing plastics.
Check Stock

Dremel MM80W 18-Pack Oscillating Sanding Pads, Includes 60, 120, 240 Grit Sanding Triangles, Use on Softwood, Hardwood and Plastics

  • ...cuts in wood trim, cutting copper pipe and removing window glaze, to name a few.
  • Quick fit accessory change system - provides accessory changes twice as fast as similar oscillating tool systems.
  • Sandpaper accessory allows the multi-max to be used for sanding hardwood, softwood, chipboard, rusted metal, fiberglass and plastics. Requires MM11 hook and loop pad accessory.
  • Use 60-Grit for rough wood or metal sanding and rust or old finish removal. Use 120-Grit for general wood or metal sanding. Use 240-Grit for final finishing of wood, metal, plaster and other surfaces.
  • USA BASED CUSTOMER SERVICE – Available by chat, email, phone or visit us at our service center in Racine, WI.
  • Dremel multi max accessories also fit the Fein multi-master and the Bosch multi-X.
  • The Dremel multi-max can tackle numerous tasks such as sanding wood, removing caulk, removing tile grout, cutting drywall, scraping stuck vinyl flooring, making flush cuts in wood trim, cutting copper pipe and removing window glaze, to name a few..
  • Sandpaper accessory allows the multi-max to be used for sanding hardwood, softwood, chipboard, rusted metal, fiberglass and plastics. Requires MM11....
Check Stock

J-B Weld 50112 ClearWeld 5 Minute Set Epoxy Syringe - Clear - 25 ml

  • J-B Weld Clearweld: A Clear, Quick Setting And Multipurpose Two Part Epoxy That Provides A Strong And Lasting Bond On Surfaces Including Metal, Tile, Most Plastics, Ceramic, Glass, Wood And More. J-B Weld Clearweld Comes In A Syringe Allowing For An Easy 1:1 Mix Ratio. The Unique Syringe Has A Re-Sealable Cap That Prevents Drying Out And Leaking, Allowing For Multiple Uses.
  • Cure And Set Time: After Mixing The Two Part Formula With The Included Mixing Tray And Stir Stick, Clearweld Takes 5 Minutes To Set And 1 Hour To Cure. J-B Weld Clearweld Set And Cure Color Is Clear.
  • Strength: J-B Weld Clearweld Has Tensile Strength Of 3900 Psi.
  • Surface Applications: Metal, Most Plastics, Pvc, Wood, Concrete, Ceramic & Tile, Fiberglass And Glass.
Check Stock

PROXXON Bench Circular Saw KS 115, 37006 , Green

  • A specialist to cut the smallest pieces, whenever working with a regular circular saw is impossible and too dangerous.
  • For perfectly straight cuts in wood, non-ferrous metal, plastics and fiberglass reinforced plastics.
  • The high-performance 110 - 120V motor is very quiet and has a prolonged life expectancy.
  • Machined and perfectly plane aluminum worktable in size 6 1/4" x 6 1/4" (160 x 160mm).
  • Scope of delivery: 1x PROXXON Bench Circular Saw KS 115 including 1 Super Cut Saw Blade. Part number: 37006.
Check Stock

Multifunctional Mini DIY Table Saw Durable and Convenient 19x17x10CM 110-240V 5000RPM Small Precision Table Bench,DIY Woodworking Cutting Home Machine Safe and Efficient

  • Suitable for processing wood, engineering plastics and soft metals.
  • Wide application range and flexible to operate.
  • The transformer has over current, over voltage, over heat protection.
  • The hand held machine has seven standard grinding tools which is varied.
  • With a drill bit, it becomes a hand drill, with a grinding wheel, it becomes a hand grinder, and with a milling cutter, it becomes a hand mill, very easy to use.
Check Stock

Pacer Tech SGM22-12 Original Super Glue Future Glue Gel Instantly Bonds Metal, Rubber, Most Plastics, Aluminum, Ceramics, China, Wood, Leather, Pottery

  • Price For: Each Application Time: 10 to 30 sec. Functional Cure: Not Specified Chemical Type: Cyanoacrylate Item: Instant Adhesive Color: Clear Full Cure: 24 hr. Temp. Range: -65 Degrees to 180 Degrees F Viscosity: Gel Application: Aluminum, Brick, Cardboard, Ceramic, Corkboard, Fabric, Wood, Leather, Metal, Most Plastics, Rubber, and Vinyl.
  • Characteristics: For Vertical Applications And Gap Filling, Temp And Chemical Resistant, For Porous And Non-Porous Materials, Medium Viscosity, For Preassembled And Close-Fitting Parts Adheres To: Aluminum, Brick, Cardboard, Ceramic, Corkboard, Fabric, Wood, Leather, Metal, Most Plastics, Rubber, And Vinyl Size: 2g Specific Gravity: 1.05 Container Type: Tube Gap Fill: 0.020" Standards: NA Tensile Strength: 2800 psi.
  • Country of Origin (subject to change): Taiwan.
Check Stock