Categories

Best Wood Rounding Tool

Portable Table Saw Handmade Woodworking Bench Lathe Electric Polisher Grinder Cutting Saw DIY Model Crafts Cutting Tool (volts_of_alternating_current, 110)

  • The table Saw built with 6mm thick platform durable no deformation ensure the flatness and high quality cutting performance.
  • The saw built-in motor speed controller module to regulate the motor speed stepless with over-load protection and over current protection.
  • 8 functions in one, multifunction mini table saw for handmade woodworking such as electric polishing, grindering, engraving, sanding, sloting and cutting.
  • Equipped with the graduated miter gauge and acrylic protecting fence on the top on the cutting desk.
  • Products included: 1x standard set 1x12mm rounding tool 1x drill chuck 1x22mm rounding tool 10x sandpaper 1x cloth wheel 1x wool brush 1x flexible shaft 1x sponge polishing wheel 1x polishing plate 1x polishing plate axis 1x connecting rod 1x chuck key.
Check Stock

ROUNDING OVER BIT

  • Cuts all composition materials, plywoods, hardwoods, and softwoods.
  • Use on hand-held and table-mounted portable routers.
Check Stock

DMI Walker Tray With Cup Holders Walker Tray For Folding Walkers Gray

  • WALKER TRAY IS COMPATIBLE with most standard walkers, as well as folding walkers that are approximately 16 to 19 inches from handle to handle and with handles that are no longer than 11 1/2 inches in length and 1 1/2 inches wide. Tray size: 21 by 16 by 1 inches.
  • weight capacity: 5 pounds. Attaches easily to most walkers. Not compatible with extra wide or Bariatric walkers..Note: Actual Dimension "20.81 x 15.81 x 1 inches" rounding up "21 x 16 x 1 inches".
  • WALKER TRAY WITH 2 CUP HOLDERS and raised edges to prevent spills.Weight capacity: 5 pounds.
  • NO TOOL ASSEMBLY as the walker tray simply slides over the handles of your walker and holds meals, crafts, books, personal items and more..
  • EASY TO CLEAN, made of durable, light weight plastic..
  • Note: Actual Dimension "20.81 x 15.81 x 1 inches" rounding up "21 x 16 x 1 inches".
Check Stock

Turns any standard walker into a tv/transport tray - North American Healthcare JB4790 Walker Tray

  • WALKER TRAY IS COMPATIBLE with most standard walkers, as well as folding walkers that are approximately 16 to 19 inches from handle to handle and with handles that are no longer than 11 1/2 inches in length and 1 1/2 inches wide. Tray size: 21 by 16 by 1 inches.
  • weight capacity: 5 pounds. Attaches easily to most walkers. Not compatible with extra wide or Bariatric walkers..Note: Actual Dimension “20.81 x 15.81 x 1 inches” rounding up “21 x 16 x 1 inches”.
  • WALKER TRAY WITH 2 CUP HOLDERS and raised edges to prevent spills.Weight capacity: 5 pounds.
  • NO TOOL ASSEMBLY as the walker tray simply slides over the handles of your walker and holds meals, crafts, books, personal items and more..
  • EASY TO CLEAN, made of durable, light weight plastic..
  • Note: Actual Dimension “20.81 x 15.81 x 1 inches” rounding up “21 x 16 x 1 inches”.
Check Stock

Lumex Folding Walker Tray with Cup Holders and Tool-Free Assembly, Grey, 603900A

  • WALKER TRAY IS COMPATIBLE with most standard walkers, as well as folding walkers that are approximately 16 to 19 inches from handle to handle and with handles that are no longer than 11 1/2 inches in length and 1 1/2 inches wide. Tray size: 21 by 16 by 1 inches.
  • weight capacity: 5 pounds. Attaches easily to most walkers. Not compatible with extra wide or Bariatric walkers..Note: Actual Dimension "20.81 x 15.81 x 1 inches" rounding up "21 x 16 x 1 inches".
  • WALKER TRAY WITH 2 CUP HOLDERS and raised edges to prevent spills.Weight capacity: 5 pounds.
  • NO TOOL ASSEMBLY as the walker tray simply slides over the handles of your walker and holds meals, crafts, books, personal items and more..
  • EASY TO CLEAN, made of durable, light weight plastic..
  • Note: Actual Dimension "20.81 x 15.81 x 1 inches" rounding up "21 x 16 x 1 inches".
Check Stock

ATP Automotive Oxygen Sensor Socket Set 7PC Socket Set

  • 21Pcs Sensor Oil Pressure Sending Unit Socket Set Oxygen Injection Tool Set Remove Oxygen.
  • Most comprehensive kit available. Features extended and reinforced socket body removes the most stubborn sensors without rounding them off.
  • Automotive 6pt and 12pt sensor sockets set for installing and removing oxygen sensors, injectors and thermal switches.
  • 7/8inches Short low Profile O2 Oxygen Sensor Socket, 7/8inches Universal Oxygen Sensor Socket.
  • Universal Vacuum Switch PVS, TVS Socket Tool.
Check Stock

SATA 9-Piece Full-Polish Combination Wrench Set, SAE - ST09019SJ

  • [VARIETY OF SIZES] 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4".
  • [EASE OF USE] Combination wrenches with 15° offset box-end provides comfortable knuckle clearence.
  • [LONG-LASTING] Full-polish chrome finish.
  • [PREVENT FASTENER DAMAGE] Box-end features off-corner loading design to reduce fastener rounding.
  • [TOOL ROLL] Comes packaged in a durable and easy-to-transport tool roll for storage, transport or organization.
Check Stock

OKDIAMOND Metal Cutting Diamond Blades Multipurpose All Purpose Cut Off Wheel for Wood,Stone,Rebar,Metal,Steel,Reinforced Concrete-4-1/2 Inch

  • Size: 4 1/2" diameter with a 7/8" arbor hole. Bushing for adapting to just about any hand-held grinder or trim saw. The maximum safe operating speed is 12,500 RPM..
  • Multi-Purpose:2 in 1 Cutting Wheelcan be used for cutting,grinding,beveling,rounding or shaping materials. Vacuum Brazed All Purpose Metal Cutting Diamond Blade cut-off wheel.
  • Vacuum Brazed Technology, more efficient than Electroplated saw blades,5 times. Vacuum Brazing Diamonds on the blade gives a quicker and more aggressive cut than standard diamond blades.
  • Dry working, wet working may prolong the working life. Designed to cut through the tough materials. Multipurpose All Purpose Cut Off Wheel. For Cutting Hard wood, stone, aluminum, Fire Door, Masonry, Plastic, PVC, Rebar, reinforced Concrete, Steel metal, and more.
  • 【NOTICE】For your safety, please must wear gloves and goggles and be care around spark when using rotary tool accessories. Please according to operation tips..
Check Stock

SATA 3-Piece Full-Polish Metric Flare Nut Line Wrench Set for Removing or Replacing Nuts on Fuel, Brake or Air Conditioning Lines - ST09033U

  • [VERSATILE SET] Professional tool set grips six common sizes of flare nut– 9X10mm.
  • [SECURE GRIP] Flare nut wrench design grips five sides of fasteners on lines, providing less slippage and rounding than a traditional crowfoot.
  • [FULL-POLISH FINISH] Chrome, full-polish finish wipes clean easily and resists rust or corrosion.
  • [ALLOY STEEL] One-piece alloy steel tool construction maximizes durability for rugged performance.
  • [MECHANIC’S TOOL] The perfect tool for mechanics, auto repair technicians, or other industrial tradesmen who work on lines.
Check Stock

Ball Peen Hammer

  • Heavy duty forged and polished fine grain steel head.
  • Versatile tool - Works as a blacksmith hammer, chasing hammer, masonry hammer, rounding hammer, pin hammer.
  • Lifetime Warranty - All Edward Tools come with a lifetime warranty.
Check Stock

Crescent 1/4" Drive 6 Point Standard Metric Socket 10mm - CDS17N

  • Off-corner loading design reduces fastener rounding.
  • Manufactured from Crestoloy alloy steel for better strength and longer tool life.
  • Nickel Chrome Plated for Long Lasting Finish.
Check Stock

SATA 3-Piece Full-Polish SAE Flare Nut Line Wrench Set for Removing or Replacing Nuts on Fuel, Brake or Air Conditioning Lines - ST09032U

  • [VERSATILE SET] Professional tool set grips six common standard sizes of flare nut with 3/8x7/16, 1/2x9/16 and 5/8x11/16-inch tools.
  • [SECURE GRIP] Flare nut wrench design grips five sides of fasteners on lines, providing less slippage and rounding than a traditional crowfoot.
  • [FULL-POLISH FINISH] Chrome, full-polish finish wipes clean easily and resists rust or corrosion.
  • [ALLOY STEEL] One-piece alloy steel tool construction maximizes durability for rugged performance.
  • [MECHANIC’S TOOL] The perfect tool for mechanics, auto repair technicians, or other industrial tradesmen who work on lines.
Check Stock

GEARWRENCH 28 Pc 6 Pt Combination Wrench Set SAE/Metric - 81923

  • 15° offset for better access in tight spaces.
  • Off-corner loading design on box end provides better grip and reduces fastener rounding.
  • 6 point box end design for secure fit on hex fasteners.
  • Manufactured from alloy steel for better strength and longer tool life.
Check Stock