IRWIN 10-Inch Circular Saw Blade, Carbide, 40-Tooth (15270)
- Corrosion-resistant coating on the circular saw blade helps prevent rusting.
- Precision-ground, carbide-tipped teeth let each circular saw blade make smooth, accurate cuts.
- Circular saw blades are designed for wood cutting.
- 16° hook angle with 40 teeth and ATB grind.
- 10" blade length with 5/8" diamond arbor and 0.102" kerf.
Check Stock
SHALL Oscillating Tool, 4.5A Oscillating Multitool Kit with 5° Oscillation Angle, Quick Change & Kickback Protection, 6 Variable Speeds, Auxiliary Handle, 34Pcs Saw Accessories and Carry Bag Included
- ...ch easier. 500w high-power motor provides great power and improves working efficiency. Compared with others with lower power motor and less oscillation angle, ours is 4 times more efficient than others in cutting wood and 2 times more efficient than others in cutting metal tubes.
- 34-Piece Accessories: 1pc wood/metal blade, 1pc wood/plastic blade, 1pc Bi-Metal semicircle saw blade, 1pc HCS semicircle saw blade, 1pc sanding pad, 1pc triangular carbide grit rasp, 1pc triangular wood cut blade, 1pc carbide grit semicircle saw blade, 1pc rigid scraper blade, 20pcs sanding sheets (60, 80, 120, 180, 240 grit, each 5). Multiple use, applicable for cutting, sawing, polishing and working on various materials such as low and medium hardness metal pipes, wood, nails, screws, pipes, and so on.
- 6 Speeds Adjustment: 6 variable speeds (8000-16000RPM) can be adjusted by users to meet the needs of various interior decoration. Multifunctional and flexible, working well on different materials with different saw accessories to avoid causing objects and drill saw accessories broken.
- Easy Change with Kickback Protection: Able to change saw accessories easily without using other tools and prevent clamps the finger. Universal, fits most brands’ saw blades, sanders, and other ....
Check Stock
Shop Fox W1888 10\ Hybrid Table Saw With Riving Knife, White
- The 15A optimised gearbox and blade system increases motor and blade life to cut through a variety of materials including steel, aluminium, wood, even wood with embedded nails and plastic, all with just one blade that comes included with this table saw..
- Rip cutting, assisted by an adjustable, full-length, parallel fence with measuring rail guide ensures reliable smooth square cutting every time. Set the blade to the desired angle up to 45 degrees bevel tilt and up to 60 degrees miter which covers all common cutting angles..
- Raise and lower the blade height for trench cuts with this folding table saw. Achieve 3-1/4 in. depth of cut at 90° and 2-1/4 in. depth of cut at 45° bevel..
- The included 28T Japanese TCT saw blade (tungsten carbide tipped blade) allows the table saw to cut effortlessly through steel, aluminium, wood with embedded nails, plastic and more.
- For added safety, the included push stick offers safer operation when handling off cuts and the huge saw table features left and right table extensions to support wide work-pieces with a table surface area of 47-1/4 x 25-3/16 inch..
- The all in one Rage 5-S table saw offers a collapsible frame with wheels for easy storage and portability meaning there is no need for use of a miter saw stand..
Check Stock
Freud D0704DH Diablo 7-1/4\x4T PCD Tip TCG Hardie Fiber Cement Saw BLD,5/8 Arbor (Single Pack)
- Application: The 24T wood blade is suitable for all types of wood, plastic, particle board, MDF, hardboard and plywood cutting. The HSS metal blade best for aluminum, wood, PVC, and other non-ferrous thin sheet. The diamond blade is structured to be able to cut concrete, roof tiles, blocks, bricks, granite and all other tiles without any hassle.
- High Quality: The tungsten carbide tipped blade and diamond tipped blade are made of excellent high grade quality steel material that makes it a robust, the HSS blade is made of high-speed steel, more durability.
- Cut Smooth: Sharp saw blade cutters with thin kerf enables fast efficient cuts. The 24 segment blade allows you to cut straight lines and is perfect for providing plunge cuts and long rip cuts.The 60 segment blade allows you to cut straight lines perfectly. The diamond blade is easy to use and cuts all tiles quickly.
- Compatible: These circular saw blades are compatible to use with electric circular saw with arbor of 3/8in(9.5mm). Compatible with GALAX PRO 4 Amps 3500RPM Mini Circular Saw and 5.8 Amps Mini Circular Saw.
- What You Get & Dimensions: 1 X 60 grit diamond blade, 1 X 44T HSS blade, 2 X 24T Carbide tipped blades, 1 X Information card.
- saw blade diameter: 4-1/2" (115 mm), arbor size: 3/8"(9.5m....
Check StockHunters Specialties 100053 Control Grip Bone & Wood Saw, Black 021291708840
- The Hunter Specialties Folding Saw Duel Blade is 2 separate 170mm, 6. 7-inch 3Cr13 strong stainless steel blades, one blade for wood and one for bone.
- Bone blade features fine teeth to easily saw through bone material, especially a deer’s Pelvic bone.
- Wood blade features coarse teeth to easily saw through tree limbs.
- Both blades are always accessible – no disassembling or swapping out blades necessary.
- Simply unfold the bone or wood blade when needed.
Check StockOlson Saw AC70010 Saw Blade Lubricant Stick Stone for Band Saw Blades
- Prolongs blade life and produces smoother and quicker cuts.
- Keeps metal, plastic and wood cutting blades from clogging with wood chips or pitch.
- For power and hand held cutting tools including band, scroll, circular, hack and jewelers saw blades.
- This wax stick is specially formulated to keep metal, plastic, and wood cutting blades from clogging because of chips or pitch..
- Push stick into moving saw blade so that teeth are thoroughly coated..
- The wax will flow when saw blade becomes warm, keep the blade clean and prevent clogging..
- This adds to the life of the blade and produces easier, smoother and quicker cuts..
- If using Cool Blocks replacement band saw blade guides apply lubricant stick only to tooth tips..
Check Stock
Diablo by Freud Diablo DOU5S 5 pc Universal Fit General Purpose Oscillating Blade Set (5-Piece)
- What You Get: Why pay $10-$20 per blade? JANCHI saw blades match & exceed name-brand quality at a fraction of the price. 4 Pack Combo 4-1/2 Inch Compact Circular Saw Blade Set with 3/8" Arbor. 2 pack 24T TCT blade for wood, 1 pack 60T HSS blade for sheet metal, 1pack 60# diamond disc for tile, meet your everyday needs..
- 24T TCT BLADE: Manufactured with durable premium alloy steel material, with hardened,fully polished and chrome plated surface, sharper construction-grade tungsten carbide teeth, for long-lasting cuts in wood, plastic, and composite materials..
- 60# DIAMOND DISC: Manufactured with high quality and durable heat-treated manganese steel and #60 diamond grit can provide longer cutting life.The segmented design improves airflow, helps the saw blade to dissipate heat, and remove cutting dust, provides a smooth, fast, clean and efficient cutting, Max 13,000 RPM, ideal for cutting ceramic tile, stone tile, backer board and cement..
- 60T HSS BLADE: Manufactured with high-speed steel, more durability.Sharp saw blade cutters with thin kerf ensure smooth, fast and accurate cutting with impressive results. Ideal for thin sheet metal and aluminuim , wood, plastic and drywall..
- COMPATIBLE:These circular saw blades are compatible to use with electric circul....
Check Stock
Jet, Small Grizzly, Powermatic 64 Table Saw Zero Clearance Insert by Peachtree Woodworking PW956 Approx Dims 12-1/2 in x 3-1/2 in x 7/16 in
- ...ng and compare it to the size we list. Also be aware of the shape of your current insert of whether its round, square ends or if there are any indents or protruding notches. Insert colors may vary from images shown..
- If you own a table saw, then you probably have had smaller pieces of wood get caught between the saw blade and the factory supplied throat plate opening. This can cause that piece of wood to jam up against the blade and go flying across the room or worse yet, right back at you. Zero clearances help minimize this situation from happening since there is no gap between the blade and the zero clearance opening. The opening is more like a custom slot cut to the exact width of your table saw blade..
- Another great reason to use a zero clearance insert is to help reduce that pesky and irritating tear out you always tend to get on your cuts. Without a zero clearance, the wood has no support by the blade to prevent the wood from tearing out. This is especially true when cutting plywood. Zero clearance inserts help prevent tear out by essentially enveloping the blade on all sides which doesn’t allow the wood to tear out since there is not gap between the blade and insert..
- Zero Clearance inserts can be used in conjunction with most any table saw bla....
Check Stock
GALAX PRO Saw Blade Set, Pack of 4 Assorted 60T HSS Metal/24T TCT Wood/Diamond 4-1/2-Inch Circular Saw Blade with 3/8\ Arbor for Fast Cutting…
- Application: The 24T wood blade is suitable for all types of wood, plastic, particle board, MDF, hardboard and plywood cutting. The HSS metal blade best for aluminum, wood, PVC, and other non-ferrous thin sheet. The diamond blade is structured to be able to cut concrete, roof tiles, blocks, bricks, granite and all other tiles without any hassle.
- High Quality: The tungsten carbide tipped blade and diamond tipped blade are made of excellent high grade quality steel material that makes it a robust, the HSS blade is made of high-speed steel, more durability.
- Cut Smooth: Sharp saw blade cutters with thin kerf enables fast efficient cuts. The 24 segment blade allows you to cut straight lines and is perfect for providing plunge cuts and long rip cuts.The 60 segment blade allows you to cut straight lines perfectly. The diamond blade is easy to use and cuts all tiles quickly.
- Compatible: These circular saw blades are compatible to use with electric circular saw with arbor of 3/8in(9.5mm). Compatible with GALAX PRO 4 Amps 3500RPM Mini Circular Saw and 5.8 Amps Mini Circular Saw.
- What You Get & Dimensions: 1 X 60 grit diamond blade, 1 X 44T HSS blade, 2 X 24T Carbide tipped blades, 1 X Information card.
- saw blade diameter: 4-1/2" (115 mm), arbor size: 3/8"(9.5m....
Check StockOverpeak 10-Inch Table Saw Blade ATB Ultra Fine Finishing 90 Teeth Wood Cutting Circular Saw Blades
- ▲Material – OVERPEAK saw blades made of tougher tungsten carbide for up to 5x longer cutting life than other saw blades.
- ▲Low Noise & Cutting Stable – 6 Laser cut expansion slots and 4 Laser-cut stabilizer vents trap noise and vibration, keeping it cool and reducing blade warp.
- ▲Alternate-Top Bevel Teeth – The 10 inch saw blade with unique tooth design provides straight cuts and cutting smoother.
- ▲Machine Use – Framing saw blade is great for circular saw, table saw, miter saw. RPM up to 6000.
- ▲General Usage – The Overpeak 10 inch carbide blade is 90 tooth and suitable for ripping wood, crosscuts wood, plywood, and laminate.
Check Stock
CEE 4Pack 3-3/8 Inch Compact Circular Saw Blade Set 85mm TCT/HSS/ Diamond Circular Saw Blade Assorted for Wood, Plastic, Metal, Tile Cutting, 5/8\(15MM) Arbor Mini Saw Blades
- 【DURABLE】The circular saw blades are made of durable premium alloy steel material, with hardened and sharper construction-grade carbide teeth for effective woodworking. Fully Polished and Plated Surface provides a long-lasting usage life..
- 【Cut Smooth】Sharp saw blade cutters with thin kerf ensure smooth, fast and accurate cutting with impressive results..
- 【Compatible】Saw blade set fit for Rockwell Versacut Versa Cut Rk3440k , Makita 3-3/8" Cordless Sh01w 12v, Craftsman Nextec and anything that will take a 3-3/8 inch (85mm) blade with a 5/8 (15mm) inch arbor..
- 【Application】24T wood blade is suitable for all types of wood, plastic, particle board, MDF, hardboard and plywood cutting. The HSS metal blade is best for aluminum, wood, PVC, and other non-ferrous thin sheets. The diamond blade is structured to be able to cut concrete, roof tiles, blocks, bricks, granite and all other tiles without any hassle..
- 【Package Include】1 x 24T Carbide Tipped Saw Blade, 2 x 44T HSS Saw Blade, 1 x 60 Grits Diamond Saw Blade.
Check Stock
FALKENWALD 7 1/4 Circular Saw Blade Multi-Material - Circular Saw Blades 7 1/4 inch Wood, Aluminum, Metal - Saw Blades 7 1 4 Compatible with DEWALT etc
- REAL ALLROUNDER - With our multi-material circular saw blades 7 1 4 inch you don't have to think anymore. It is a wood saw blade and metal cutting blade in one. Perfect for sawing in wood, aluminum, steel sheets, pipes and plastic..
- 100% PRECISION - The key to a perfect cut lies in tooth position & material of the 7 inch circular saw blade: With Falkenwald you get fine cutting results for a cross-section or longitudinal-cut as well as for the production of a groove..
- 100% COMPATIBLE - Turn your saw into a professional tool! No matter if DeWalt 20V MAX 7-1/4-Inch, SKIL 5280-01, DeWalt DWE575, Makita 5007F 7-1/4. The blade fits on the popular saws from DeWalt, Skil, Makita, Black+Decker etc...
- CUT FINE & TEAR-FREE - Get excellent sawing results on variable materials with the tuned tooth pitch of the carbide 7 inch saw blade. Our metal saw blade ensures tear-free cutting edges under maximum load. Metal cutting saw blade..
- MONEY BACK - To make your decision easier, you get our promise: If you are not satisfied with our large circular saw blades for any reason, you will get your money back - Up to 60 days after purchase! FALKENWALD miter saw metal cutting blade..
Check Stock
Mini Table Saw for Crafts 4 Blades Metal Chop Saw 96W Adjustable Cut Depth 7-speed Power Supply Portable Cut Off Table Saw for Woodworking Plastic Metal
- The 15A optimised gearbox and blade system increases motor and blade life to cut through a variety of materials including steel, aluminium, wood, even wood with embedded nails and plastic, all with just one blade that comes included with this table saw..
- Rip cutting, assisted by an adjustable, full-length, parallel fence with measuring rail guide ensures reliable smooth square cutting every time. Set the blade to the desired angle up to 45 degrees bevel tilt and up to 60 degrees miter which covers all common cutting angles..
- Raise and lower the blade height for trench cuts with this folding table saw. Achieve 3-1/4 in. depth of cut at 90° and 2-1/4 in. depth of cut at 45° bevel..
- The included 28T Japanese TCT saw blade (tungsten carbide tipped blade) allows the table saw to cut effortlessly through steel, aluminium, wood with embedded nails, plastic and more.
- For added safety, the included push stick offers safer operation when handling off cuts and the huge saw table features left and right table extensions to support wide work-pieces with a table surface area of 47-1/4 x 25-3/16 inch..
- The all in one Rage 5-S table saw offers a collapsible frame with wheels for easy storage and portability meaning there is no need for use of a miter saw stand..
Check Stock
