Categories

Best Wood Screw Head Diameter

#8 x 1-1/4 Deck Screws 316 Marine Grade Stainless Steel Square Drive Type 17 Wood Cutting Point Quantity 100 Size Number 8 x 1-1/4 Long by Fastenere

  • Screw Size #8 (0.164") - Straight Pilot Drill size for Soft Wood 7/64 . Straight Pilot Drill size for Hard Wood 1/8.
  • Screw length measured from top of flat to tip of screw 1-1/4" (1.25") - Screw head Diameter 0.340".
  • Made of highly corrosion resistant 316 Marine Grade Stainless Steel. Type 316 is also used extensively for surgical implants within the hostile environment of the body..
  • Deck screws have a type-17 (auger type) thread cutting tip for installation into decking materials. They have bugle heads that allows the screw to depress the wood surface.
Check Stock

Stainless Steel Lath Screws 8 x 3/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 3/4 0.75 in.

  • Wire-Lath Modified Truss Head Screws for Fastening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a tru....
Check Stock

Stainless Steel Lath Screws, 8 x 1-5/8, Sharp Point Modified Truss Head Phillips Drive (Quantity: 100) Type 17 Cutting Point 305 (18-8) Stainless Steel, Length: 1-5/8 (1.625) in.

  • Wire-Lath Modified Truss Head Screws for Fastening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a tru....
Check Stock

Stainless Steel Lath Screws 8 x 1-1/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 1-1/4 1.25 in.

  • Wire-Lath Modified Truss Head Screws for Fastening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a tru....
Check Stock

100PCS #10 x 1 3/8 to 2 Available Flat Head Sheet Metal Screws Phillips Drive Wood Screws 304 Stainless Steel 18-8 Self Tapping

  • Material: High quality 304 (18-8) stainless steel, perfect strength and good corrosion resistance.
Check Stock

100PCS #10 x 1/2 3/8 to 2 Available Flat Head Sheet Metal Screws Phillips Drive Wood Screws 304 Stainless Steel 18-8 Self Tapping

  • Material: High quality 304 (18-8) stainless steel, perfect strength and good corrosion resistance.
Check Stock

40 Pack Threaded Insert Nutsert, 1/4\-20 x 15mm Screw in Nut Threaded Wood Inserts, for Wood Furniture(with 1/4\ Allen Wrench)

  • Size: Insert head diameter: 0.445" (11.3mm), body diameter: 0.315"(8mm), threads diameter: 0.410"(10.4mm),1/4-20 threaded insert length: 0.591"(15mm).
  • Material: High quality carbon steel with high hardness, can keep a long-lasting hold..
  • Application: These furniture screws are suitable for wood furniture, hardwood or solid wood, such as furniture combinations(Threaded inserts are used to drill the right size hole and Install with hex key provided, and screw in nut connector screws)..
  • Recommended drill bit for wood: For Soft Wood-- 3/8" (8.5mm/9mm)dirll bit in soft wood, the threads cut will easily go into the wood.
  • For Hard Wood-- 3/8" (10mm),pls drill a hole that close to the outside threads diameter.If the hole is too small, Screwing it may split the wood or insert. If you are not sure the harness of the wood material, pls drill a proper sized hole for test before installing it..
  • Package included: 40 *1/4-20 Threaded Insert Nutsert + 1*1/4"(6mm) Allen Wrench..
Check Stock

576 Pcs Screw Cap Stickers and 120 Pcs Screw Cap Screw Covers Self Adhesive PVC Screw Hole Stickers Plastic Screw Cap Covers for Wood Screws Furniture Cabinet, Mixed Color

  • Abundant Quantity: there are 6 sheets of self adhesive screw hole stickers measuring about 15 mm/ 0.6 inch in different colors, including white, black, wood textured color, reddish brown, brown and grey, 576 pieces in total.
  • And 120 colorful screw head caps, approx. 12 mm/ 0.5 inch in diameter, suitable for 4 mm/ 0.16 inch self tapping screw heads.
  • Sufficient quantity to meet your daily uses and replacements.
  • Sturdy and Reliable: these wood stickers are made of quality PVC plastic materials, which are safe and flexible, sturdy enough that the furniture stickers won't deform easily, which can serve you for long term use.
  • Practical and Beautiful: these wood screw covers can stick firmly to most surfaces and won't fall off easily, and the screw cap can provide protection for your screws and avoid rusting.
  • Multiple colors are available to meet your various needs to make your furniture and walls look better after installation.
  • Easy to Use: with the self adhesive design, these wood hole covers are easy to use, you can simply peel them off and paste on the holes that need to be covered.
  • As for the screw cap covers, you can easily install them in place with a screw tool, saving your time and effort.
  • Multiple Uses: these screw cover stickers and screw hole caps c....
Check Stock

#14 x 3/4' Hex Washer Head Self Drilling Screws, Self Tapping Sheet Metal Tek Screws, 410 Stainless Steel, Black Oxide Finish, 50 PCS

  • Type: #14 x 3/4", 410 Stainless Steel, Black Oxide..
  • Screw Length: 3/4"(excluding the head height).
  • The drilling tek screws are 100% 410 stainless steel which is one of the highest forms of corrosion resistant steel..
  • Ideal use for wood, metal or other tough materials and known for their effecient application performance and endurance..
Check Stock

#8 x 1\ Stainless Steel Wood Screw 100 pcs - Flat Head Self Tapping Screw Metal Screws, Pointed Tail, Full Thread

  • Sheet-Metal Screws: Have deeper and sharper threads, so many woodworkers use them, but the type of wood screw is quickly becoming very popular..
  • Wood Screws: Made of Stainless steel 304 which is superior to regular steel and zinc plated fasteners, The case-hardened, extruded-thread wood screw has threads that are very deep and sharp..
  • Screwdriver Types: The head screw has a cross-shaped recess in its head. This type is much easier to drive with a power screwdriver because the bit doesn’t jump off the screw head as easily..
  • Easy To Use: You can drive these screws into softwood and plywood without drilling a pilot hole. For hardwoods, a pilot hole is still recommended. Be used in plastic, fiberglass, deck, or wood sheet stainless steel screws..
  • Package: 100 PCS #8 x 1" Flat Head Sheet Metal Screws or Wood Screws..
Check Stock

Blingstar L Bracket Stainless Steel Corner Brace 16 Pcs 1.57x1.57 Inch Joint Right Angle Bracket 90 Degree Corner Fastener for Wood Furniture Bedframe Cabinet Drawer Chair, with 64 Pcs Screws, Black

  • 【Package Contain】 16 pcs corner braces and 64 pcs flat head screws. Each brace bracket size: 40*40*16mm/ 1.57*1.57*0.63in, thickness: 2mm/ 0.08in, the hole diameter: 5mm/ 0.2in. The screw length: 16mm/ 0.63in, screw head diameter: 7mm/ 0.27in..
  • 【Premium Material】 Blingstar corner fasteners adopt high quality stainless steel which are anti-rusting and sturdy for serving longer. The black coated surface and round edge are smooth without burrs, no worry about scratching your hands or furniture. The screws are made of high hardness coated iron material that are difficult to be broken..
  • 【Brace & Reinforce】 Small L-shape brackets are designed to prevent the corner joint from collapsing under structural loads or from impact or force. These right angle brackets are important fastener to join two wood furniture parts together..
  • 【Easy to Install】 The attached self tapping screws have deep thread that offer firm fastening force and great grips in wood materials. It's easy for you to install L bracket in wood material. Counterbore designed mounting holes ensure the screws not protruding..
  • 【Widely Applications】 90 Degree metal brackets are not only suitable to build wood frame, but also ideal to fasten and reinforce wooden bed, cabinet, dresser, c....
Check Stock

HanTof 125 Pcs Small M3 x 8mm Black Phillips Truss Head Wood Screws,Cross Mushroom Head Self Tapping Furniture Cabinet Screws,Sheet Metal Screw with Black Oxide Coated,Hardened Carbon Steel,Type A

  • Thread type: Coarse, wood screws.125pcs in an bag /Shipping in Box..
  • 【High Quality Material】 Made of premium quality carbon steel,Hardened,black oxidation treatment surface,which has higher corrosion resistance and anti-rust effect than ordinary screws,longer service life,not easy to damage,more solid.suitable for indoor,Wear-proof,anti-rust..
  • 【Exquisite Craftsmanship】 This fast self-tapping screw has big Truss Head,Clear and Deep Threa,Sharp Tips,excellent craftsmanship makes our cross groove not slippery, fast, not easy to break, high strength, not easy to deform, not eccentric.
  • 【Value Packaging and Easy to Use】: This Cross Truss head screws package contains 125 PCS with big round head to meet your daily needs, is not easy to slide during installation,the Threaded was Smooth,deep and sharpand,can be quickly and easily for screwing in wood,the screw lock the wood firmly.They are ideal for use at home,in the office or at work..
  • 【Wide Range of Applications】 Precision threads can easily pass through a variety of materials, such as pine, plywood, particle board, MDF Drywall,plastics,soft metal, etc., suitable for door handles, the mechanical industry and small ....
Check Stock

#10 x 3/4' Pan Head Sheet Metal Screw, 304 Stainless Steel 18-8, Phillips Drive Self Tapping Screw, Round Head Wood Screw, Bright Finish, Full Thread, Pack of 50

  • Package Includes: #10 x 3/4" Pan Head Sheet Metal Screws or Wood Screws.
  • Screw Length: 3/4 inch or 19mm (including the height of the head), Diameter of the head: 9.5mm (Approximately).
  • Our deep cut phillips drive ensure the bit fits deep and snug in the head to help reducing stripping..
  • Usage: Wood, Metal and other tough materials.
  • Made of 100% 304 Stainless Steel (no coating outside), provides good strength and corrosion resistance in bad environments..
Check Stock