WoodRiver Deluxe Tenoning Jig

  • Precision machined heavy-duty cast-iron construction.
  • Fits table saws with 3⁄4″ x 3⁄8″ miter gauge slot.
  • Accurate control with large feed handles.
  • Quick-release feature saves setup time –.
  • WoodRiver is proudly made by Woodcraft, America’s leading supplier of saws, planes, power tools, hand tools, wood stain and paint, routers, sanding, wood, kits, dust collection and more. Our award winning family of brands includes WoodRiver, Highpoint, Woodcraft and Woodcraft Magazine as well as the greatest selection of woodworking books, videos, and plans..
Check Stock

WoodRiver Snap-Set Miter Gauge Fence Combo with Flip-Stop

  • Positive stops at 0°, 22.5°, 30°, 45°, 60°, 67.5° and 90° in both directions.
  • Adjustable miter bar fits snug inside standard 3/4" x 3/8" miter slots.
  • 17-1/2"-long anodized aluminum fence rail adjusts along miter gauge head.
  • Flip-stop adjusts along the fence for repeatable accuracy - Improve safety and accuracy on the table saw and the router table.
  • WoodRiver is proudly made by Woodcraft, America’s leading supplier of saws, planes, power tools, hand tools, wood stain and paint, routers, sanding,....
Check Stock

Feiyang Miter Spring Clamps Kit for Woodworking,Picture Frames,Wood Trim,Moldings

  • When you making picture frames,moldings,wood trim work,and any compound miter,the biggest trouble in gluing up mitered corners is keeping them from....
  • You can use the miter spring pliers to easily open the sharp tip, just place the spring clamp onto the mitered corner you need to secure, then release....
  • Unlike other available spring clamps, the uniquely designed tip is designed to pierce the wood,so that there is minimal visible evidence of the clamps....
  • The miter clamps are designed with no gaps,can be applied for pocket-sized projects,and spread up to approximately 2 inches,so they will cover most....
  • Great for any compound miter. If you are a woodworking enthusiasts,contractors,carpenters or craft hobbyists,you will love this tool..
Check Stock

Rockler Clamp-It Corner Clamp Jig - Glass-Filled Polycarbonate Woodworking Clamps - Corner Clamps to Hold Panel Parts Together - Right Angle Clamp for Fastening Work - Woodworking Tools

  • Table Saw Miter Sled: This is the perfect table saw sled, no adjustments needed! Simply cut one piece on the leading face, one on the trailing face, and voila! Since both pieces reference off a perfect 90-degree angle, the miters will fit perfectly..
  • 45 Degree Miter Sled: This table saw sled system gives you an exact 45-degree cut every time. Our table saw miter is great for picture frames or anytime accurate corner. Miters cuts are needed..
  • Adjusting Miter Track Fit: Use a 7/64" hex wrench (not included) to advance the nylon set screws in the Rockler 45 degree miter sled bar until you achieve a smooth, no-slop fit in your saw’s miter track..
  • Standard Slot: Through slots in the base allow you to securely clamp moldings at table level. This table saw miter sled fits standard 3/8" x 3/4" miter slots..
  • Easy To Use: The table saw accessories miter can be easily drilled to add extended fences and stops. Pre-installed adjustable nylon pins provide a no-slop fit to the miter track..
Check Stock

POWERTEC 71414 24-pc Aluminum Quick Release Corner Framing Clamp Kit

  • INCLUDES: (8) Threaded rods,(4) Quick release threaded nuts, (4) Threaded connector nuts, (4) Keeper nuts, (4) Right angle corners, and Instruction manual.
  • FUNCTION: Clamps all styles of picture frames up to 45-1/2” max – tightening all four corners independently for dedicated pressure.
  • VERSATILE: Perfect for an assortment of applications, including picture frame making, crafting cabinet drawers, clamping small boxes and furniture.
  • FEATURES: Quick release components with knurled solid brass quick nuts for fast and easy adjustment, right angle corners that give optimal corner clearance for gluing and other requirements.
  • PREMIUM BUILD: This picture frame miter clamp set is made with lightweight extruded aluminum, able to distribute a higher strength to weight ratio for your picture frame and project clamping.
Check Stock

Rockler 45 Degree Miter Sled for Table Saw - Miter Saw Sled Ensures Durability & Low-Friction Sliding - Table Saw Accessories Fits Standard 3/8\ x 3/4\ Miter Slot – Fence Accessories

  • Table Saw Miter Sled: This is the perfect table saw sled, no adjustments needed! Simply cut one piece on the leading face, one on the trailing face, and voila! Since both pieces reference off a perfect 90-degree angle, the miters will fit perfectly..
  • 45 Degree Miter Sled: This table saw sled system gives you an exact 45-degree cut every time. Our table saw miter is great for picture frames or anytime accurate corner. Miters cuts are needed..
  • Adjusting Miter Track Fit: Use a 7/64" hex wrench (not included) to advance the nylon set screws in the Rockler 45 degree miter sled bar until you achieve a smooth, no-slop fit in your saw’s miter track..
  • Standard Slot: Through slots in the base allow you to securely clamp moldings at table level. This table saw miter sled fits standard 3/8" x 3/4" miter slots..
  • Easy To Use: The table saw accessories miter can be easily drilled to add extended fences and stops. Pre-installed adjustable nylon pins provide a no-slop fit to the miter track..
Check Stock

Shop Fox W1720 Aluma-Classic Fence with Long Rails

  • Anodized aluminum clamp body for durability.
  • Steel threaded components with large brass clamp pad.
  • Adjusts on both ends from 1/2" to 6" opening.
  • L-shaped arm slides into hole of fence edge - Simply drill 3/8" hole in fence edge, insert clamp, and tighten.
  • WoodRiver is proudly made by Woodcraft, America’s leading supplier of saws, planes, power tools, hand tools, wood stain and paint, routers, sanding, wood, kits, dust collection and more. Our award winning family of brands includes WoodRiver, Highpoint, Woodcraft and Woodcraft Magazine as well as the greatest selection of woodworking books, videos, and plans..
Check Stock

WoodRiver Quick Gear Clamp, 8 Inch, Single Clamp

  • Rubber pads on jaw prevent marring - Grip and hold objects of various sizes.
  • WoodRiver is proudly made by Woodcraft, America’s leading supplier of saws, planes, power tools, hand tools, wood stain and paint, routers, sanding, wood, kits, dust collection and more. Our award winning family of brands includes WoodRiver, Highpoint, Woodcraft and Woodcraft Magazine as well as the greatest selection of woodworking books, videos, and plans..
Check Stock

Aircraft Tool Supply Ats Super Duty Rivet Squeezer (3\)

  • Rubber pads on jaw prevent marring - Grip and hold objects of various sizes.
  • WoodRiver is proudly made by Woodcraft, America’s leading supplier of saws, planes, power tools, hand tools, wood stain and paint, routers, sanding, wood, kits, dust collection and more. Our award winning family of brands includes WoodRiver, Highpoint, Woodcraft and Woodcraft Magazine as well as the greatest selection of woodworking books, videos, and plans..
Check Stock

WoodRiver Standard 3/4 Miter Track 32” Length

  • 3/4" x 3/8" miter track has a bottom T-profile.
  • Pre-drilled for using included screw hardware - Nominal 1/2" profile height fits dadoes or laminated jigs.
  • WoodRiver is proudly made by Woodcraft, America’s leading supplier of saws, planes, power tools, hand tools, wood stain and paint, routers, sanding,....
Check Stock

Mayhew Tools 28690 Rigiflex Hose Clamp Pliers

  • Dual-durometer handle provides comfortable, soft grip.
  • Quick-release mechanism - Innovative box-joint design to prevent twisting.
  • WoodRiver is proudly made by Woodcraft, America’s leading supplier of saws, planes, power tools, hand tools, wood stain and paint, routers, sanding, wood, kits, dust collection and more. Our award winning family of brands includes WoodRiver, Highpoint, Woodcraft and Woodcraft Magazine as well as the greatest selection of woodworking books, videos, and plans..
Check Stock

Corner Clamps 4Pcs Woodworking 90 Degree Clamps of Cast Metal, Durable Go-tool Right Angle Clamp with Adjustable Jaws Good for DIY Framing, Shelving, Welding, Fish-tanks, Cabinets

  • §【Free Your Hand】: The problematic miter joint projects still annoy you? Innovative 90 degree corner clamps make setup more manageable with L-shaped jaw that can clamp different pieces simultaneously, saving your time and freeing your busy hands without requiring more aligning and turning..
  • §【Versatility】: The woodworking corner clamps align two pieces of wood, planks, metal, or glass into the clamp at a 90-degree angle. Moreover, the right angle clamps set is suitable for fixing fish-tanks, joining photo frames, installing furniture, welding, and molding, featuring holes in the base that allow them to be mounted to a workbench to add more stability for setup..
  • §【Premium Quality】: The rustproof aluminum-alloy parts of the unit make the angle clamps exceptionally long-lasting and coating on the surface prevents corrosion without worrying subpar paints would rub off on your workpieces. The vise-like design can hold firmly up to 200  pounds of pressure and nylon rounds that keep you from damaging the pieces being joined..
  • §【Accuracy】: The accuracy of the corner clamps allows you to make and reinforce frames with precision featuring maximum clamping range of 3-inch. The swivel jaw can rotate the clamp to adjust work-pieces to different ....
Check Stock

3-1/2\ To 4-1/2\ Universal Fence Clamp 2 Pack

  • Our 525 Large Coping Sled works on both the router and shaper, either in the miter slot or against the fence. This is the safest and most accurate way to make cope cuts and other cross-cuts on a router table or shaper. Don't try to cope without it! Two adjustable feed handles provide firm control over the sled and your work..
  • Includes an 11-3/4" adjustable steel miter bar that mounts in 6 different locations for best placement. Can also be used without the miter bar against your fence..
  • Holds stock up to 10" wide. Heavy duty 1/2" phenolic base (15-3/4" x 15-3/4") will not distort from clamp pressure..
  • Features one 500 lb. Outboard Toggle Clamp and two 500 lb. Inboard Toggle Clamps. Hold stock up to 1-3/4" thick, or 2-3/4" with optional 6305R Riser Kit (one Riser Kit required for each toggle clamp). Fence is 24” long. Optional 525S Flip Stop available for repetitive work..
  • Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check Stock