Categories

Best Woodturning Chisels

YUFUTOL 4pcs Tungsten Carbide Cutters Inserts Set Combination Set for Wood Lathe Turning Tools,(Include Square,Round and Diamond Shaped Cutters) Supplied with 4pcs Screws

  • This Combination Carbide Inserts Set match our 5pcs woodturning tool set perfectly . The will give the Best Selection for your Woodturning job. It fits YUFUTOL 5pcs Woodturning Tools Or Other Similiar Brand Tools.Easy to replace your jointers and planers..
  • Made of solid tungsten steel,providing you a better experience and durable use..
  • This is a combination set that meets the needs of roughing and finishing cutting, suitable for both professional carpenters and beginners..
  • 4 different carbide cutters satisfy all you demand:Square With Square(14x14x2.0mm),Diamond Shaped (10mm X 28mm X 2.5mm with Round Point),2pcs Round (Ø12mm*2.5mm-30°).
  • All the carbide inserts are supplied with screws. And they are perfect match our YUFUTOL Woodturning Tool Set..
Check Stock

Simple Woodturning Tools Carbide Wood Lathe Tool Mid Size Set of 5 with Solid Aluminum Beautiful Color-Coded Lathe Tool Handles Stainless Steel USA Made

  • Set of 5 professional carbide wood lathe tools are American made by Harrison Specialties in Ramsey, Minnesota, a family owned CNC machining and....
  • Simplify woodturning tool selection with beautiful color coded solid aluminum handles. Each CNC machined powdercoated turning tool handle is 1-1/8"....
  • Carbide woodturning tools feature ultra-sharp replaceable tips, which have multiple sides that can be rotated. Replacing or turning the cutters is....
  • Four included tools are designed with a 3/8" square shaft making it easy to keep tools flat on the tool rest. Overall turning tool length is 9". The....
  • Greatly simplifies woodturning with no need for any sharpening equipment..
Check Stock

TcnoMreol Concrete SDS Chisel Bits Set, 8pcs Chrome Steel SDS Plus Pointed Flat Wide Scaling Chisels Gouge Scraping Chisels Angled Bent Removal Chisel for Concrete, Brick , Masonry Max to 7/10*11*3In

  • ...shot peening treatment, increasing toughness and hardness, and reducing wear to a greatly. And the handle designed by optimal geometry, high occlusion, matched perfectly, easy for installation, also, can reduce vibration when working, provide high working efficiency and long use life..
  • Size: Come with 8pcs different chisels, 2pcs Point chisels, 11/20"*5-9/10"(14*150mm), 11/20"*9-4/5"(14*250mm), 2pcs Flat chisels, 11/20"*5-9/10"(14*150mm), 11/20"*9-4/5"(14*250mm), 2pcs Scraping chisels, 11/20"*5-9/10*1-14/25"(14*250*40mm), 11/20"*9-4/5"*2"(14*250*50mm), 1pcs Hollow Grooving gouge chisels, 11/20"*9-4/5"(14*250mm), 1pcs Scaling chisels, 7/10*11*3"(17*280*75mm). These chisels can meet all kinds of your need.
  • Widely application: With round shank, these chisels applicable to all SDS-plus hammer, and widely for the removal and drilling of concrete, brick, masonry and granite, and Hollow grooving gouge chisels special used for removal of walls, tiles and cement, also for wire groove..
  • Warranty: We promise provide you good service, if there is any problems, you can contact us directly, we will solve your problems timely and refund and new replacement is available.
Check Stock

I d Rather Be Woodturning T-Shirt Lathe Woodturner Gift

  • Wear this wood crafting tshirt while you turn wood on the woodturning lathe to carve a bowl with your chisel or parting tool. This wood turning shirt....
  • The I'd rather be Woodturning tee is a perfect wood turner gift for men and women, who love the craft of woodworking..
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check Stock

8Pcs Tungsten Carbide Cutters Inserts Set for Wood Lathe Turning Tools(Include 11mm Square with Radius,12mm and 8.9mm Round,30x10mm Diamond with sharp point),Supplied with Screws

  • This Combination Carbide Inserts Set match our 6pcs woodturning tool set perfectly . The will give the Best Selection for your Woodturning job. It fits Aogbra 6pcs Woodturning Tools Or Other Similiar Brand Tools.Easy to replace your jointers and planers.
  • 4 different carbide cutters satisfy all you demand:Square With Square(11*11mm),Diamond Shaped (10mm*30mm),2pcs Round (Ø12mm*2.5mm) and (Ø8.9mm*1.85mm).
  • Made of solid tungsten steel,providing you a better experience and durable use.
  • This is a combination set that meets the needs of roughing and finishing cutting, suitable for both professional carpenters and beginners.
  • All the carbide inserts are supplied with screws.
Check Stock

YUFUTOL 6pcs Tungsten Carbide Cutters Inserts Set Combination Set for Wood Lathe Turning Tools,(Include Square, Square With Radius,Round and Diamond Shaped Cutters) Supplied with 6pcs Screws

  • This Combination Carbide Inserts Set will give the Best Selection for your Woodturning job. It fits YUFUTOL 7pcs Woodturning Tools Or Other Similiar Brand Tools.Easy to replace your jointers and planers..
  • Made of solid tungsten steel,providing you a better experience and durable use..
  • This is a combination set that meets the needs of roughing and finishing cutting, suitable for both professional carpenters and beginners..
  • 6 different sizes satisfy all you demand:Square With Radius (15x15x2.5mm-R50),Square(14x14x2.0mm),Diamond Shaped (10mm X 28mm X 2.5mm with Round Point),2pcs Round (Ø12mm*2.5mm-30°),Round (Ø16mm*3mm-30°).
  • All the carbide inserts are supplied with screws. And they are perfect match our YUFUTOL 7pcs Woodturning Tool Set..
Check Stock

Oneway Wolverine Grinding Jig with Quad Setup Jig for Sharpening Workshop Tools • Woodturning Gouges • Chisels • Scrapers • Skews and Wood Carving Tools

  • The included Quad Setup Jig helps you correctly set the proper grinding angles for Roughing Gouges at 45 deg, Parting Tools at 30-60 deg, Skews at 21.5-43 deg and Bowl Scrapers at 8 deg. Its called the “Quad Setting Jig” since one jig sets the correct angles for all 4 of the other HSS woodturning lathe tools. The Quad Setting Jig is designed to be used with 8” bench grinders..
  • Carpenter chisels up to 1-1/4" wide can be sharpened using the Wolverine's Vee-Arm. The arm is adjusted to set the bevel, and the chisel can be ground with small sideways motions and light cutting pressure. Three or four strokes on a strop will generate a razor sharp edge. The Wolverine Grinding Jig comes with a 3 x 5 inch adjustable platform which allows even large scrapers to be ground with ease..
  • Parting tools are sharpened using the platform. Laying it flat on its side on the platform gives a slight hollow grind which is very desirable for clean parting. The Wolverine's Vee arm can be used to sharpen skews, but a far superior method is ONEWAY's Skew Grinding Attachment (not included). With a finely dressed 80 or 120 grit wheel, even very small carving tools can be superbly ground using the standard Vee-Arm..
Check Stock

Penn State Industries PKMALLET Brass Mallet Woodturning Project Kit

  • A lathe is needed to make a finished handle.
  • Blank, 1/2" forstner bit, and all other turning supplies are not included.
  • Each PKMALLET kit includes (1) Brass Head measuring 1-1/4" diameter x 1-7/8" long and weighing 11.5 oz. , and (1) 3" internal connecting bolt with 1/2" x 13tpi thread.
  • Recommended minimum blank size needed to turn is 1-1/2" x 1-1/2" x 4-1/2".
  • This is a Turn-Between-Centers woodturning project kit.
  • Customize the turned, finished handle shape and length.
Check Stock

KINJOEK 6 PCS Chisel Set, SDS Rotary Hammer Drill Bit Set with Carrying Case, Pointed Chisels Flat Chisels Wide Chisels

  • SUPERIOR MATERIAL - Different from ordinary carbon steel used in regular hammer drill bits, this impact drill bit set is made of superior 40cr steel, which effectively improves the wear resistance and durability..
  • HEAT TREATMENT PROCESS - This SDS hammer drill bit set adopts heat treatment process and integral stamping technology to improves the toughness and hardness, and strengthen the impact force..
  • COMPLETE SET - You will get 2 pointed chisels, flat chisels, and wide chisels. These SDS plus chisels adopt the universal round handle and groove design to prevent chisel from falling and slipping effectively..
  • WIDE APPLICABILITY - These rotary hammer chisels are suitable for demolition of walls, excavation, and removal of sharp objects. These chisels can be used for concrete, wall tiles, cement walls, stone, etc..
  • 100% MONEY BACK - For this chisel set, you will get a 30-day warranty and 100% customer support. If there are any quality problems for 30 days, please feel free to contact us, and we will give you a full refund..
Check Stock

Penn State Industries PKSCKIT Mini Scissors Woodturning Project Kit

  • Brass tube, mini scissors parts, and clip only.
  • A LATHE IS NEEDED TO 'TURN' THE FINISHED HANDLE.
  • Blank, bushing set, drill bit and all other turning tools and supplies are not included.
  • Includes (1) PKSCKIT Mini Scissors Woodturning Project Kit in Chrome.
  • Easy project to turn on a 7mm pen mandrel or between centers.
  • Minimum blank size needed to turn is 3/4" x 3/4" x 3".
  • Scissors tuck away safely in to your turned barrel.
  • When closed, finished length is approximately 4-9/32".
Check Stock

Penn State Industries PKPCUTA Standard Stainless Steel Pizza Cutter Kit Woodturning Project 5pack

  • This is a woodturning project kit. Hardware only. HANDLE NOT INCLUDED. A LATHE IS NEEDED TO 'TURN' INTO FINISHED pizza cutter. Blanks, 1/2" drill bit,....
  • Includes (5) PKPCUTA Standard Stainless Steel Pizza Cutter Woodturning Kits..
  • This is a Turn-Between-Centers project kit. Overall length will vary depending on your own custom handle design. Minimum blank size is 1-1/2" x 1-1/2"....
  • Features a 4" stainless steel cutting wheel, a thumb guard, and a ferrule style handle..
Check Stock

Penn State Industries PKGRIND-4 Antique Style Copper Finish Peppermill Mechanism Woodturning Kit (1, Antique Copper)

  • This is a woodturning project kit. Hardware only. A lathe is needed to make into finished pens. Blanks and drill bits are not included..
  • Includes (1) PKGRIND-4 Antique Style Copper Finish Peppermill mechanism woodturning project kit.
  • Cast metal mechanism measures 4-1/2" high by 2" diameter.
  • Adjustable mechanism for choice of course to extra fine pepper grounds.
  • Requires (3) drill bit sizes: 5/16", 1" Forstner, and 1-3/4" Forstner. Minimum blank diameter is 2-3/4"..
Check Stock

Penn State Industries PKMSPN Measuring Spoon Set Kit Woodturning Project (1pack)

  • These are woodturning project kits. A LATHE IS NEEDED TO 'TURN' INTO FINISHED A MEASURING SPOON SET. Blanks, bushings, drill bit, and all other turning accessories are not included..
  • Includes (1) PKMSPN Woodturning Measuring Spoon Set Kit..
  • Each set includes measuring spoon sizes 1/4 tsp, 1/2 tsp, 1 tsp, and 1 Tbs..
  • Uses bushing set PKMSPBU. Requires 7mm drill bit (PK7-MM) and 5/8" x 5/8" x 3-1/2" minimum blank size..
  • Easy to make on a pen mandrel with 7mm tubes. Chrome ring included. The measurements are marked in the metal..
Check Stock