Categories

Best Woodworking Angle Finder

General Tools 823 Digital Angle Finder Rule, 10-Inch

  • PREVENT WASTE- This digital 10” stainless-steel ruler and angle finder combination tool makes precise, easy and fast measurements.
  • LOCK IT AND REVERSE IT- Digital protractor has lock and reverse angle functions. Place the angle rule where you need to measure your next cut, LOCK it in place with knurled locking nut, make a mark and use your miter saw to make your cut. The angle finder will automatically display the reverse angle.
  • MEASURE 360-DEGREES- Hinge mechanism on the angle rule allows a full range of 0 to 360-degrees to measure inside outside and reverse angles, accuracy +/-0.3 Degrees. Center check notches are on the ruler ends enables exact ruler placement marking. Display has a hold function to freeze movement for accuracy.
  • PICK YOUR ZERO POINT- Woodworking tool can be zeroed at any point in the swing plus the display can be inverted for easy reading.
  • LARGE LCD DISPLAY- Easy to read LCD display eliminates guessing or eyeballing the angle and length with one convenient protractor tool.
  • Power source: "CR2032" Lithium-ion battery (included).
Check Stock

Proster 200mm 360°Angle Finder Data Hold LCD Angle Ruler One Key Zeroing 80mm 3 1/8\ Magnetic Height Gauge Depth Gauge for Woodworking Construction Home Decoration

  • 【Accurate Angle Finder】200mm stainless steel ruler to measure length (metric and imperial), 360°angle sensor for relative and absolute angle measurement inside and outside, Range:0-360°,Resolution：0.05°,Accuracy：±0.3°,Repeatability：0.05°..
  • 【One-key Data Hold & Zero Reseting】Knob locked one-key data hold function for both angle/depth gauge to hold the angles/depth measured at any time.
  • Zeroing reset button at any angle for relative measuring..
  • 【Multi-function Magnetic Height Gauge】3-In-1 Height/Depth/Thickness Gauge,easy to measure bore/slot depths with plunger, one key mm/inch/fraction switch, range: 80mm, resolution: 0.05mm, accuracy: 0.10mm for routers horizontal/vertical measure with self standing magnetic feet..
  • 【LCD Display & Stainless Steel】Sturdy plastic thickness gauge for with quick-reading digital LCD display, harden stainless steel angle finder ruler and depth ruler provides lifelong service..
  • 【Wide Applicatoion】This angle finder with magnetic height depth thickness gauge is especially designed for Woodworking, Construction, Home Decoration, Table saws, Hand Routers, Etc..
Check Stock

AUTOUTLET Digital Angle Finder Gauge Magnetic Angle Level Finder Digital Protractor Inclinometer Miter Angle Cube Level Box for Woodworking,Table Saw with Backlight 0-360° Rotation

  • 【Digital Angle Finder Gauge】Large digital LCD display with white backlight. You can easily read precise measurements with its bright backlit display. Waterproof IP54..
  • 【Magnetic Base】With Powerful Magnets in the base, the Magnetic Angle Level Finder can attach to Any Iron Surface. Flat bottom, easy to clean the attachment on the Inclinometer after use..
  • 【Accurate Measurements】This Angle Level Finder provides Fast and Accurate measurements. Wide Measuring Range of 4×90˚ (0 ~ 360˚) with ± 0.1 Repeatability. Displays Bevels in Degrees, Percent Slope..
  • 【Automatic digital inversion】When the Inclinometer is inverted, the number will be automatically reversed, so that you can directly see the measurement result..
  • 【Wide Range of Applications】The Digital Protractor can be used in Woodworking,Table Saw, Construction, Machinery, Telecommunications, Automobile etc..
Check Stock

VOLCANOES CLUB 3 in 1 Digital Angle Finder Protractor - Angle Gauge Spirit Level Ruler with INCH/MM & Level Bubble Vials - Measuring Super Gauge Tool - Decoration, Construction, Woodworking, Machinery

  • 3 IN 1 DIGITAL ANGLE FINDER: Our angle finder is a very convenient woodworking tool in angle (inner and exterior angles) measurement, length (inches and millimeters) measurement and as a spirt level judge whether it is a level or not..
  • HIGH ACCURACY: The equipment has higher resolution of 0.05°and higher accuracy of ±0.1°. It can quickly and accurately calculate the angle. By adding three vials (Horizontal level/ Vertical level/ Circular level), it can be used Like a spirit level and achieve multiple measurements, such as horizontal measurement、vertical measurement as well as universal measurement . (It will not display numbers on the screen, and just help you to judge whether it is a level or not.).
  • FUNCTIONS AND FEATURES: ‘HOLD BUTTON’ can keep the measurement result at any angle, so as to transfer the measurement result to read and record. ‘LOCKING KNOB’ also can fix the angle shape, so as to transfer the angle and draw it on the paper. (The purpose of the locking knob is to adjust the tightness, not to lock the measurement.) ‘AUTOMATIC TURN OFF’ after 5 minutes without any operation or movement to extend the battery life. ‘HANGING HOLE’ is easy to store and carry..
  • MATERIAL: Our angle ruler is made of special hard plastic. Compa....
Check Stock

Angle Protractor ,Stainless Steel Angle Ruler Finder 0-180 Degrees ,10 cm Woodworking Ruler, Angle Measure Tool, Angle Finder Ruler, Craftsman Angle Measure Tool

  • 2 in 1 Angle Finder : It is 2-in-1 manual protractor ruler for measuring lengths and angles. Great gift for dads, men and women who work in woodworking, construction, engineering..
  • Durable Angle Ruler: It is stainless steel protractor,prevent rust and corrosion , do not bend or deform easily ,laser etched measurements offer clear reading ..
  • Lightweight and Portable : You can put the angle measure tool in your pockets,the angle finder ruler is clear and accurate for measuring length(0-10 cm)..
  • Adjustable Protractor Arm : The protractor arm can be easily asjusted from the nut, so it helps you draw radial lines, measuring and marking angles..
  • Wide Applications : This angle ruler is a practical measuring tool for school, office, architect, suitable for for engineering, school, office, architect, and drawing who needs to measure data..
Check Stock

Laser Angle Finder Line Digital Level Tool, Woodworking Tools, 5-Side Magnets Miter Saw Protractor, Electronic Level, Measures & Sets Angles, Hanging Pictures, Carpenters, Class II line

  • 【Used In Many Settings】Turn to this mini digital level angle gauge for straightforward tasks like leveling pictures on a wall and more complex jobs like working with landscape drains, gutters, or measuring pinion angles on a car.
  • This tool is used for woodworking, plumbing, construction, machinery, telecommunications, automotive, and more..
  • 【WHY CHOOSE RDINSCOS】RDINSCOS tools are known for their affordability, quality and reliability. So reliable, that we back this angle finder meter with a 3-year-replacement-warranty. If it let’s you down, we’ll replace it. No questions asked..
Check Stock

VRBOSHA Angle Finder,Compass,Miter Saw Protractor with Precision Laser Scale,Hanging Ruler,Best Gifts for Carpenters Plumbers Building Trades,Accurate Measurement Tool for Home Improvement

  • 【MULTI MEASRUING TOOL】 - VRBOSHA angle ruler is a measuring tool for anyone, it can not only be used as an angle finder as well as a ruler so....
  • 【UNIQUE DESIGN】 - The miter saw protractor with mechanical lock (lock knob) can keeps the angle invariable in your measuring process.The....
  • 【STURDY AND DURABLE】：VRBOSHA protractor is made of high-quality ABS plastic, which is durable, anti-drop, light weight and small in size. Easy....
  • 【WIDE APPLICATION】- VRBOSHA angle finder is widely used in woodworking, construction, schools, home improvement, and machining as well as any DIY....
  • 【100% SATISFACTION SERVICE】- The upgraded multi-function angle measuring tool makes calculating angles become a quick and accurate job. At....
Check Stock

The Table Saw Book, Completely Revised and Updated

  • Wide Application: Miter saw protractor #505P-7 replacement widely use in woodworking, plumbers, and all building trades..
  • Laser Dial:Laser carving dial, accurate and clearly Dial, easy to read, use velvet bag packaging, well protect the dial..
  • 7.3 Inch Miter saw protractor, you can put it in the bag or pocket, easy to carry..
  • 360-Degree Measurement:360 - degree rotation can measure different angles.Inside & Outside miter angle finder..
  • Simple Operation: Direct read, setting the cut saw angle.But It's not an instrument that measures the angle of bending, it just helps you cut some standard angles..
Check Stock

Digital Angle Finder,3in1 Auzof Cube Inclinometer Protractor with Backlight, Woodworking Measuring Tool-4-side Strong Magnetic Angle Gauge,Electronic Level, Measures & Sets Angles, Laser Class II

  • 【The choice of craft lovers】Not only the baseboard, but also the strong magnetic upgrade at the four sides. Never slide on the table saw blade or any metal surface. Magnetic feature and lasers are great advantages for measuring, cutting, leveling in woodworking renovations and building furniture..
  • 【Small size & portable】L2.4in, W2.4in, H1.2in, portable pocket size,Save time and effort hanging decorations. Dual lasers are great helper for horizontal and symmetrical installation. Laser Power:.
  • 【Rechargeable/dustproof/waterproof】This inclinometer, digital angle finder comes complete with a USB-C charging cable for the internal 340mAH rechargeable battery. It also has dust-proof and IP67 waterproof performance with bright backlight. Even in garage, with the door open and the sunshine pouring in, you can easily read the display..
  • 【Wide Applications】This magnetic laser digital angle gauge can help you do simple tasks in many measurement environments, such as leveling pictures on a wall, and more complicated jobs, such as dealing with landscape gutt....
Check Stock

Stainless Steel t Square, Incra T Rule, Edge Ruler Woodworking, Compass and Protractor Set, Multi-Function Angle Measure Tool with Wall Hanging Storage Rack(18-INCH)

  • FUNCTION:woodworking protractors & ruler is a multifunctional device for length measurement and angle drawing. It can measure lengths and draw parallel lines at different angles and intervals easily, which will bring much convenience to your work.
  • PRECISION：The ruler tool can be adjusted from 0° to 70°, every 5° (plus 22-1/ 2°, 67-1/ 2°) has a steel ball to lock the angle firmly during the painting lines.
  • Any angle can be obtained by moving and rotating the ruler. The ruler has a total length of 18in, and the smallest scale is accurate to 1/32in. There are 144 serrated notches and 18 circular holes, The spacing of the serrations is 11/112in (approximately equal to 2.49 mm) and that of the round holes is 1in.
  • MATERIAL：The dial of this adjustable woodworkers edge rule is made of hard plastic, both the angle finder and ruler body are made of stainless steel, which is moisture-proof, rust-proof and corrosion-resistant. The laser scale is clear and precise, does not fade, and effectively extends its service life.
  • T-SHAPED DESIGN: this angle measure tool is designed with t-shape, a series of precision-machined index ....
Check Stock

GemRed 82305 Digital Angle Finder Protractor Stainless Steel 7inch/200mm Black Button

  • 【Patented measuring technology】Ruler and protractor combination for easy measuring inside and outside angles. 【Digital Display】Easy to read..
  • 【Durable Rulers】Well-made stainless steel rulers and laser etched measurements offer clear reading and years' usage..
  • 【High Accuracy】Accuracy of this protractor is ±0.3 degree. It is a good choice for most projects like woodworking, crown molding and daily use. Folded length: about 7.5 inch/220mm.Total length 400mm..
  • 【Locking Function】For read it easily, GemRed angle finder could be locked at any angle. *NO REVERSE ANGLE/DISPLAY FUNCTION..
  • 【Battery】CR2032 battery. Package contains battery..
Check Stock

Bosch GTL3 65ft Square Laser Level for Tile and Square Layout

  • MULTI-FUNCTION: MUSIBO woodworking protractors & ruler is a multifunctional device for length measurement and angle drawing. It can measure lengths and draw parallel lines at different angles and intervals easily, which will bring much convenience to your work. Each woodworking ruler is equipped with a wall-mounted storage rack, which make it easy to store. MUSIBO woodworking protractors & ruler is an indispensable tool for every woodworkers and mechanics.
  • HIGH PRECISION: The ruler tool can be adjusted from 0° to 70°, every 5° (plus 22-1/ 2°, 67-1/ 2°) has a steel ball to lock the angle firmly during the painting lines.
  • Any angle can be obtained by moving and rotating the ruler. The ruler has a total length of 13in, and the smallest scale is accurate to 1/32in. There are 104 serrated notches and 13 circular holes, The spacing of the serrations is 11/112in (approximately equal to 2.49 mm) and that of the round holes is 1in.
  • SIMPLE OPERATION: You can make the cross surface of the disc next to the edge of the board, then turn the ruler to get the angle you want. Adjust the nut to get the best feel. Place the tip of the pencil in the saw tooth notch and then move the ruler along the edge of the board to get different parallel lines. In short, you can ....
Check Stock

GemRed Digital Level and Protractor, 2 in 1 Digital Angle Finder LCD Display, 10inch/270mm/360°Angle Gauge for Woodworking/Carpenter/Construction/DIY Tools (Black)

  • ...roduction needs. Conversion between absolute measurement and relative measurement. Absolute measurement mode and relative measurement mode can switch freely according to demand.
  • 【2 in 1 & Easy Used】 The Angle Finder both measure the angle and level. Calculating quickly and accurately, it’s your good partner in woodworking, construction, mechanical work and life. ☆Easy to measure all kinds of angle and draw lines.Easy calibration and Zero setting. ☆V-notch end for checking 90° degree quickly..
  • 【Practical LCD Display】 ☆Backlit LCD Display:Large LCD display with backlight, means that you can read clearly even in a dim environment. ☆Analogue quadrant showing ☆Display always reads upright: no matter which way it is turned..
  • 【Locking & Holding Function】 ☆Locking Function: Good locking function could lock the measurement at any angle. ☆Holding Function:Display has a hold function to freeze movement for accuracy.If you want to use data holding function, you need to press the HOLD button rather than twist the knob..
  • 【Durable & widely use】 This angle measure tool is made of durable aluminum and has been used for many years. The angle gauge is portable and convenient, it can be used in woodworking, welding, fabrication, construction....
Check Stock