Best Woodworking Angle Ruler

Bosch GTL3 65ft Square Laser Level for Tile and Square Layout

  • MULTI-FUNCTION: MUSIBO woodworking protractors & ruler is a multifunctional device for length measurement and angle drawing. It can measure lengths and draw parallel lines at different angles and intervals easily, which will bring much convenience to your work. Each woodworking ruler is equipped with a wall-mounted storage rack, which make it easy to store. MUSIBO woodworking protractors & ruler is an indispensable tool for every woodworkers and mechanics.
  • HIGH PRECISION: The ruler tool can be adjusted from 0° to 70°, every 5° (plus 22-1/ 2°, 67-1/ 2°) has a steel ball to lock the angle firmly during the painting lines.
  • Any angle can be obtained by moving and rotating the ruler. The ruler has a total length of 13in, and the smallest scale is accurate to 1/32in. There are 104 serrated notches and 13 circular holes, The spacing of the serrations is 11/112in (approximately equal to 2.49 mm) and that of the round holes is 1in.
  • SIMPLE OPERATION: You can make the cross surface of the disc next to the edge of the board, then turn the ruler to get the angle you want. Adjust the nut to get the best feel. Place the tip of the pencil in the saw tooth notch and then move the ruler along the edge of the board to get different parallel lines. In short, you can ....
Check Stock

Stainless Steel t Square, Incra T Rule, Edge Ruler Woodworking, Compass and Protractor Set, Multi-Function Angle Measure Tool with Wall Hanging Storage Rack(18-INCH)

  • FUNCTION:woodworking protractors & ruler is a multifunctional device for length measurement and angle drawing. It can measure lengths and draw parallel lines at different angles and intervals easily, which will bring much convenience to your work.
  • PRECISION:The ruler tool can be adjusted from 0° to 70°, every 5° (plus 22-1/ 2°, 67-1/ 2°) has a steel ball to lock the angle firmly during the painting lines.
  • Any angle can be obtained by moving and rotating the ruler. The ruler has a total length of 18in, and the smallest scale is accurate to 1/32in. There are 144 serrated notches and 18 circular holes, The spacing of the serrations is 11/112in (approximately equal to 2.49 mm) and that of the round holes is 1in.
  • MATERIAL:The dial of this adjustable woodworkers edge rule is made of hard plastic, both the angle finder and ruler body are made of stainless steel, which is moisture-proof, rust-proof and corrosion-resistant. The laser scale is clear and precise, does not fade, and effectively extends its service life.
  • T-SHAPED DESIGN: this angle measure tool is designed with t-shape, a series of precision-machined index ....
Check Stock

MUSIBO Protractor Angle Finder, Woodworkers Edge Ruler, T Square, T Ruler, Straight Edge inch Ruler,Multi-Function Angle Measure Tool Woodworking Metal Ruler Kit with Wall Hanging Storage Rack(13in)

  • MULTI-FUNCTION: MUSIBO woodworking protractors & ruler is a multifunctional device for length measurement and angle drawing. It can measure lengths and draw parallel lines at different angles and intervals easily, which will bring much convenience to your work. Each woodworking ruler is equipped with a wall-mounted storage rack, which make it easy to store. MUSIBO woodworking protractors & ruler is an indispensable tool for every woodworkers and mechanics.
  • HIGH PRECISION: The ruler tool can be adjusted from 0° to 70°, every 5° (plus 22-1/ 2°, 67-1/ 2°) has a steel ball to lock the angle firmly during the painting lines.
  • Any angle can be obtained by moving and rotating the ruler. The ruler has a total length of 13in, and the smallest scale is accurate to 1/32in. There are 104 serrated notches and 13 circular holes, The spacing of the serrations is 11/112in (approximately equal to 2.49 mm) and that of the round holes is 1in.
  • SIMPLE OPERATION: You can make the cross surface of the disc next to the edge of the board, then turn the ruler to get the angle you want. Adjust the nut to get the best feel. Place the tip of the pencil in the saw tooth notch and then move the ruler along the edge of the board to get different parallel lines. In short, you can ....
Check Stock

Aluminum Alloy Woodworking Square Size Measure Ruler, welltop 3D Mitre Angle Measuring Tool, Multifunctional 45/90 Degree Angle T Ruler Gauge, for Three Dimensional Items Measuring Timber, Pipes

  • ...manship, square marking gauge, fine polishing surface, comfortable in your hand, and easy to use. 3D design, no need to flip the body when measuring, just slide to mark the left and right 45 degree or 90 degree angles. The measurement accuracy is 1mm. It can help you to improve working efficiency and save time with woodworking projects..
  • 【Clear Scale】The multi-functional angle ruler with clear engraving metric scales, is easy to read and elegant in appearance. Compared with other plastic rulers, it is more accurate. The maximum measuring range is 155mm. Suitables for household woodworking DIY, very convenient to use and carry..
  • 【Wide AppliItation】The woodworking measuring ruler is suitable for three dimensional items: square and tubular, hollow and solid, aluminum alloy, wood, stainless steel, marble, etc. If a wise maintenance worker, carpenter, installer, construction worker, engineer is equipped with this multifunctional ruler, a variety of work needs will be solved..
Check Stock

Upgraded woodworkers Edge Ruler Thickness 1.5mm Approximately 15in .0-70 Degrees Adjustable Protractor ,Multifunctional Construction Ruler JXHONG

  • Ruler thickness 1.5mm approximately, much stronger than others(0.8mm typically).The ruler dial is made of plastic with good hardness. it has a long service life..
  • woodworking ruler is a multifunctional device for length measurement and angle drawing.this tool for every woodworkers and mechanics..
  • The protractor can be adjustable from 0 degree to 70 degrees and firmly locked every 5 degrees..
  • Loosen the nut first , adjust it to a suitable angle , and then tighten the nut to fix it at this angle . Pick up the stroke line , and then go to the next step ..
  • Each woodworking ruler is equipped with a wall-mounted storage rack, which make it easy to store..
Check Stock

Woodworking Edge Ruler, 0-70 Degrees Adjustable Protractor ,Multifunctional Construction Ruler, Angle Measuring Ruler,Thickness 1.5mm Approximately .(20in)

  • Ruler thickness 1.5mm approximately, much stronger than others(0.8mm typically).The ruler dial is made of plastic with good hardness. it has a long service life..
  • woodworking ruler is a multifunctional device for length measurement and angle drawing.this tool for every woodworkers and mechanics..
  • The protractor can be adjustable from 0 degree to 70 degrees and firmly locked every 5 degrees..
  • Loosen the nut first , adjust it to a suitable angle , and then tighten the nut to fix it at this angle . Pick up the stroke line , and then go to the next step ..
  • Each woodworking ruler is equipped with a wall-mounted storage rack, which make it easy to store..
Check Stock

HTTMT- 20 Woodworker Edge Ruler 0-70°Adjustable Protractor Angle Finder Two Arm Carpentry Ruler Measure Layout Tool [P/N ET-TOOL041-20-RAW]

  • 【Multi-function】HTTMT woodworking protractors & ruler is a 2-in-1 device Compatible With length and angle measuring / drawing..
  • 【High Accuracy】The ruler tool can be adjusted from 0° to 70°, and every 5° (plus 22-1/ 2°, 67-1/ 2°) has a steel ball to lock the angle....
  • 【Simple Operation】You can make the cross surface of the disc next to the edge of the board, then turn the ruler to get the angle you want. Even if....
  • 【Easy Storage】Each woodworking ruler is equipped with a wall-mounted storage rack, which makes it easy to store..
Check Stock

45 Degree Aluminum Alloy Angle Ruler, 2in/6cm Right Angle Triangle Height Ruler Woodworking Square Multifunction Measuring Tool

  • High Quality Material: This woodworking square triangle ruler is made of high-quality aluminum alloy material, which is oxidized, not easy to corrode and rust, strong and wear-resistant, not easy to deform, and has a long service life..
  • Dual Scale Design: This angle measuring ruler is designed with both centimeters and inches, and the front and side laser-engraved scales are clear and precise, making it easy to read the value or mark when using..
  • Easy To Use: The woodworking angle ruler is designed with a large center hole, suitable for your fingers to hold or fix on the workpiece, easy and comfortable to place, handle or move without damaging the fragile cutting edge..
  • Applications: This 45 degree aluminum alloy square is designed to clip boxes, picture frames, etc. to assist in square crafting.
  • a must-have tool for woodworking hobbyists, home builders, carpenters, engineers, and hobbyists..
  • Professional Manufacturing: This square measuring ruler is manufactured by professional technology, with high precision, good effect and stable performance. It is suitable for most working env....
Check Stock

Digital Angle Finder, farway 2 in 1 Digital Protractor, 7Inch / 200mm Stainless Steel Digital Angle Ruler with LCD Display for Woodworking/Carpenter/Construction Tool (Battery Included)

  • 【2 in 1 Digital Angle Finder】It is 2-in-1 electronic digital protractor ruler for measuring lengths and angles, both internal and external. The combination of a millimetre and inch scale ruler and a protractor makes it easy to measure internal and external angles. Great gift for dads, men and women who work in woodworking, construction, engineering..
  • 【Stainless Steel Digital Protractor】The stainless steel material is hard and durable, which can prolong the service time of this protractor. Laser etched measurements offer clear reading and years' usage..
  • 【High Accuracy & 360° Measurement Measure Angles Tool】Accuracy of this digital angle gauge is ±0.3 degree. The ruler supports measurement between metric(mm) and imperial(inch), makes it can measure length (0~200 mm/0~7 inch) convenient and accurately.Hinge mechanism on the angle rule allows a full range of 0 to 360-degrees to measure inside outside and reverse angles..
  • 【Angle Finder with LCD Display & Locking Function】Angle Finder Protractor comes with a large easy-to-read LCD display. For read it easily, this woodworking tool could be locked at any angle,and has zeroing button to reset angle finder tool at any time. It also comes with a Reverse Function Button, When you measuring large ....
Check Stock

Aluminum Alloy Measuring Layout Tool Miter Scriber Gauge Metric/Inch, Triangle Ruler Square Tool 14cm/5.5inch

  • -Made of sturdy aluminum alloy after oxidation treatment, this woodworking triangle ruler is durable, resistant to distortion, practical, anti-rust and corrosion resistant..
  • -Laser engraved imperial and metric scales on the front and side of this angle ruler are clear and precise, making it convenient and easy to read value or make marks while using..
  • -Lightweight and portable, easy to carry or store.
  • using for measuring the length, height and thickness..
  • -The large center hole design would fit for your finger to hold or fasten this ruler on workpieces, easy and comfortable to place, handle or move around and won't damage fragile cutting edges..
  • -This 45 degree aluminum alloy angle ruler is designed to clamp boxes, photo frames, etc, to assist with square making process.
  • an essential tool for woodworking lovers, home builders, carpenters, engineers, and hobbyists..
Check Stock

Multi angle measuring ruler,universal multi-angle measuring ruler 12 side hole positioning aluminum alloy multi angle measuring ruler template tool multi-angle measuring ruler with drilling locator

  • ...opening locator,Interlinked, easy to carry,Not easy to lose。The universal opening locator has three sizes of openings with diameters of 45mm, 25mm, and 40mm.They are linked together,Prevent you from losing one of them at work.
  • 【Has many uses】The multi angle measuring ruler Suitable for all kinds of work, woodworking, flooring, tiles, mounting glass, etc. Easily occupy and duplicate complex shapes on wood, recreating shapes on stones, wood, tiles and glass. It is the ideal angle measuring instrument for laying wood and tiles. multi angle measuring ruler template tool are an essential tool for any.
Check Stock

Multi Angle Measuring Ruler Made of Premium Aluminum Easy Angle Ruler 836 angleizer Measurement Tool General Template Tool Box Tile Flooring Gift for Men Women Xeroly Layout Tools by Bluebana

  • ...as four-sided ruler mechanism that slides and locks into any desired angle as a reusable stencil for endless applications. No need to create a new template for each new job or remeasure the same angles over and over again, it’s perfect for precise and accurate angle measurements and Ideal to make repetitive cuts. woodworking measure angle tools gifts for diy men folding layout triangle dowel jig.
  • ★EASIEST WAY TO MEASURE AWKWARD SHAPES: Our right angle ruler is the measure & layout tool that will save you time, money and effort, it's the ultimate ruler template tool for creating professional layouts in tile, brick pavers, lumber and any type of material, it's an essential tool for any workbench and excellent for woodworking, makes your sheetrock job much easier and an excellent gift box.
  • ★ EASY TO USE: Its unique tightening mechanism make it easy for one-handed operations.
  • Measures all angles and forms. Place it onto your work area, slide the Angleizer arms into the shape needed and tighten the screws. Form the desire template and transferred it onto any material, excellent to make repetitive cuts and measurements.
  • It is the perfect tool to make bulls eyes, arches and plumb cuts on roof joists..
  • ★ 1 YEAR WARRANTY: Our product quality is guarantee....
Check Stock

General Tools Digital Angle Finder Ruler #822 - 5\ Stainless Steel Woodworking Protractor Tool with Large LCD Display

  • ...he measurement accuracy , meet your requirements for different accuracy..
  • 【Multi-functional Angle Finder 】This protractor combine a angle finder, ruler(7 inch/190mm) and level tools( 3 bubble, Horizontal, Vertical & Circular Level), get one and can instead of 4 pcs single function tools, make it become a helpful woodworking tools and equipment in daily use, expecially you are tire of a bulk of tools in your toolbox.
  • 【Data Hold】Pressing hold button to hold the measurement at any angle, it helps the users effectively record the angle values. Lock angle feature helps maintain accuracy ideal for use in woodworking, construction, or drawing..
  • 【Durable Battery】Super endurance enables it to work continuously more than 2000 hours. Digital angle Finder automatic power-off function, save power consumption and extend battery life. Protractor is equipped with a large LED for easy reading..
  • 【Our Service 】Our worry-free 18-month warranty, and friendly customer service . So you can rest assured. There’s no worry to buy the product. Please contact us first if you have any questions about digital angle finder ruler. We provide 24-hour customer service..
Check Stock