LISHINE 4 Inch & 8 Inch Bar Clamps, 8 Pack Quick Grip Clamps for Woodworking, Trigger Clamp One Handed Ratchet Clamp, Small Bar Clamp for Craft
- 【4&8 Inch Bar Clamp】Wood clamps woodworking sets capacity up to 4 inch and 8 inch. Throat depth: 1.25 inch and 2.4 inch..
- 【Powerful Clamping Force】4 inch trigger clamp with up to 65lbs of squeezing force and a metal ratcheting mechanism, suit for light duty works, woodworking F clamps and DIY carpentry. 8 inch bar clamp 150-lbs force for workholding hand tools, gluing, clamping and securing..
- 【Clamp And Spreader】Ratchet bar clamps are used in two ways, clamp or spreader. Easy to reverse jaws can turns clamp into spreading clamp or stretching tool..
- 【One-Handed Clamp】One handed release F clamp is adopted new grip and trigger design provides simple, you can operate with one hand. Spreader bar grip is comfortable to hold, press quick-release button to slide arm into desired length..
- 【Durable And Sturdy】Quick grip clamps for woodworking is made of nylon body and high-quality hardened steel that provide great impact resistance..
Check StockTe-Co 40106 2 Piece Steel Step Block Set, 1-1/2\ Thick, 2-15/32\ Width x 3-3/4\ Height, 2-1/2\ to 6\ Height Range
- For workholding during machining applications.
- Serrated teeth match all te-co serrated end clamps.
- Measures 2-15/32" width by 3-3/4" height.
Check StockOcasar 4Pcs Toggle Clamp, Premium Adjustable 4001 Toggle Clamps, 330Lbs Holding Capacity Pull Latch Clamp for Smoker Lid Jig, Tool Box Case (16Pcs Screws)
- ...remium metal plating zinc for corrosion resistance, anti-rust. You could use them freely in different temperature environments, indoor or outdoor. Secured and worry free to use..
- 【WIDELY USED】Our pull latch can be worked for cabinet doors, storage boxes, tool boxes, cases, smoker lid, making jigs, tool fixtures, workholding, connecting movable parts, tensioning two sectional, and more. Vivid red rubber coating, which makes it easier to understand the clamp..
- 【STRONG HOLDING POWER】Our toggle clamps have a pull weight of 330lbs(150kgs), stronger than most 4001 latch in the market. Each clamp holds a surprising amount of tension before releasing, exactly hasp ..
- 【HUMANIZED PACKAGE】You will get 4 Pack adjustable toggle clamps and 16PCS screws, valuable and reasonable combination, all screws you needed to install the heavy duty toggle latches are included. If you have any problems for our quality, please contact us anytime we will reslove your problem well within 12 hours..
Check Stock16 Pack Adjustable Toggle Clamp, 330lbs Holding Capacity Heavy Duty 4001 Style Toggle Latch Hasp Clamp for Door, Box Case Trunk, Smoker Lid Jig, Quick Release Pull Latch, Sturdy Metal Draw Latch
- 【HOLDING CAPACITY】: 150Kg/ 330 Lbs, 4001 Style Toggle Latch Clamp..
- 【EASY ADJUSTABLE】Maximum overall length is 4-1/8”, lock up range from 3-1/2 to 4-1/8 inches long. Use them to keep two halves closed tightly or loosely as you like. Just screw the tension hook to get the maximum tightness.
- 【MULTIPURPOSE】Someone say they have thousands of USES. The hasp latch can be worked For cabinet doors, storage boxes, tool boxes, cases, smoker lid, making jigs, tool fixtures , workholding, connecting movable parts, tensioning two sectional , and more.
- 【EASY INSTALL】The toggle clamps are easy install, just fix them with screws. The installation distance is adjustable, Even if you install it little bit away or close, you could always adjust the screw and make it tight or loose.
- 【STURDY AND ANTI-RUST】:Toggle latch made by premium metal plating zinc for corrosion resistance, anti-rust. Works well for different temperature environments, indoor or outdoor. Soft plastics cover handle for easy, safe and comfortable operation.
Check StockTE-CO 30502 Serrated End Clamp, For 1/4\
- For workholding during machining applications.
- Made from case hardened 1018 steel with a black-oxide finish.
- Serrated teeth match all TE-CO Step Blocks.
- Bridgeport type milling machines use Part No. 20402.
Check StockTaper Pin Reamer, Spiral, 10
- Knobs, Handles, Workholding & Machine Tool Accessories.
Check StockDE-STA-CO 8115 Pneumatic Swing Clamp
- Knobs, Handles, Workholding & Machine Tool Accessories.
- Smallest in our series of pneumatic swing cylinders.
- Supplied with magnetic ring for position sensing.
Check StockGEARWRENCH 5 Pc. Straight Fluted Screw Extractor Set - 720DD
- Knobs, Handles, Workholding & Machine Tool Accessories.
Check Stock303 Stainless Steel Spherical Washer, Male & Female Assembly, 1/4\ Hole Size, 5/8\ OD, 3/16\ Nominal Thickness, Made in US (Pack of 5)
Check StockTE-CO 20413 Machinist Clamp Kit, 1/2\ Table T-Slot x 3/8-16\ Stud, 52 Pieces
- Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
- For workholding during machining applications.
- 1/2" machine tool table T-slot to fit 1/2" T-slot nuts.
- Bridgeport type milling machines use Part No. 20402.
- Made from case hardened 1018 steel with a black-oxide finish.
Check StockTE-CO 20402 Machinist Clamp Kit, 5/8\ Table T-Slot x 1/2-13\ Stud, 52 Pieces
- Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
- For workholding during machining applications.
- 5/8" machine tool table T-slot to fit 5/8" T-slot nuts.
- Bridgeport type milling machines use Part No. 20402.
- Made from case hardened 1018 steel with a black-oxide finish.
Check StockTE-CO 20401 Machinist Clamp Kit, 9/16\ Table T-Slot x 1/2-13\ Stud, 52 Pieces
- Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
- For workholding during machining applications.
- 9/16" machine tool table T-slot to fit 9/16" T-slot nuts.
- Bridgeport type milling machines use Part No. 20402.
- Made from case hardened 1018 steel with a black-oxide finish.
Check StockTE-CO 20402PL Machinist Promo Kit, 5/8\ Table T-Slot x 1/2-13\ Stud, 52 Pieces
- Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
- For workholding during machining applications.
- 5/8" machine tool table T-slot to fit 5/8" T-slot nuts.
- Bridgeport type milling machines use Part No. 20402.
- Made from case hardened 1018 steel with a black-oxide finish.
Check Stock