Woodworking Planing Stop Bench Dogs Clamp Workbench Table Accessories 3/4 inch 19mm Dog Hole

  • A perfect holding solution when hand planing thin or wide stock, allows planing of boards as thin as 7mm, Prevents the workpiece from skewing under....
  • Fits standard 3/4 inch (19mm) diameter Bench Dog hole.
  • Use two bench dogs for wide boards or cross-grain work.
  • The stop can slide on the board, fits all kinds table surface.
  • Made of aluminum alloy, durable to use,not damage to the surface of the workpiece,not ruin plane in accidentally.
Check Stock

6inch Non-Woven Abrasive Grinding Flap Wheel Nylon Fiber Wheel Scouring Buffing Pad for Rotary Tool 2inch Thickness 240 Grit Red

  • 【Work well】Strong cutting force, clear lines, high finish, good polishing effect, long service life. It can be repaired quickly and deeply after scratching..
  • 【With super elasticity】It can fully contact the product workpiece during grinding, and it is not easy to slip..
  • 【Wide-range in application】Suitable for irregular curved surfaces, good heat dissipation, no burn out of the workpiece, and fine sand particles can be ground out. Used for polishing in metallurgy, machinery, light industry, wood products, furniture, metal, plastics, melamine, building materials, automobiles, leather, textiles and other industries..
  • 【Made of high-quality materials】Made of non woven material, High density, good flexibility, suitable for special surface treatment..
Check Stock

8inch Non-Woven Abrasive Grinding Flap Wheel Nylon Fiber Wheel Scouring Buffing Pad for Rotary Tool 1inch Thickness 240 Grit Red

  • 【Made of high-quality materials】Made of non woven material, High density, good flexibility, suitable for special surface treatment..
  • 【Work well】Strong cutting force, clear lines, high finish, good polishing effect, long service life. It can be repaired quickly and deeply after scratching..
  • 【With super elasticity】It can fully contact the product workpiece during grinding, and it is not easy to slip..
  • 【Wide-range in application】Suitable for irregular curved surfaces, good heat dissipation, no burn out of the workpiece, and fine sand particles can be ground out. Used for polishing in metallurgy, machinery, light industry, wood products, furniture, metal, plastics, melamine, building materials, automobiles, leather, textiles and other industries..
Check Stock

DCT Bench Holdfast Woodworking Tools – 8in Bench Holdfast Clamps Woodworking Bench Holddown Clamps 2 Pack

  • ...ORKING JOBS: Use these work bench clamps for woodworking projects.
  • Hold downs for woodworking provides a strong, sturdy hold to allow hands-free carving, routing, sanding, planing, sawing, drilling, and finishing.
  • Protect softwood from marring by using a piece of scrap wood as padding between your holdfasts and the workpiece.
  • USE WITH YOUR WORKBENCH: Works best on workbenches with a 2.5 (6.4cm) thickness.
  • Drill 3/4 inch (1.9cm) vertical dog holes into your workbench top and slide your holdfast workbench clamps into the hole.
  • We suggest filing the shank to increase hold security.
  • PERFECT SIZE FOR YOUR NEEDS: Constructed of drop-forged steel provides these hold fast clamps with maximum durability and strength.
  • 8-inch(20.3cm) length with 3/4-inch (1.9cm) diameter shaft fits your workbench.
  • Shepard hook design offers a 4-inch (10.2cm) perimeter reach for versatility.
  • Hook features 1.3 by 1.3-inch (3.3 x 3.3cm) square end that will not mar your workpiece.
  • QUICK AND EASY CLAMPING: Slide the bench hold down clamp into your workbench dog hole.
  • Press the tip of the hook against your workpiece and firmly tap the crook of the holdfast with a wooden or rubber mallet to jam the shaft tightly in the hole.
Check Stock

3\ Wood Lathe Steel Faceplate Chucks, 1”-8TPI Thread Woodworking Accessories Tools

  • Made of Steel,Heavy and Rigid,1"-8TPI Thread Size.
  • 8 mounting holes on the plate, easy installation of the workpiece.
  • There is a flat-cut surface on the tail tube and it can be easily removed from the lathe.
Check Stock

High Precision Punch Grinding Machine Precision Electric Punch Grinder Double Roller Design 110v 108rpm, Φ1.5~25mm

  • 【Product Parameter】This is electric punch grinder, voltage: 110v/60hz, grinding punch diameter: Φ1.5~25mm, grinding accuracy: 0.005mm, length of workpiece: 20~120mm, outside grinding length: 5~35mm..
  • 【Double Roller】The design of the double roller , does not need to adjust the center, when the workpiece is placed between two rollers, that can be used with the sine magnetic table to grind various angle profile punch..
  • 【High Speed】Speed is 180rpm, fast and can improve work efficiency. Whcih with a simple pressing roller for convenient precision grinding..
  • 【Good Helper】High precise punch grinding machine is driven roller by a motor, that can avoid the fatigue phenomenon caused by hand..
  • 【High Precision】The precision punch grinder is well-made and ensure the high precision of the products. Grinding accuracy: 0.005mm..
Check Stock

Accusize Industrial Tools H.S.S Solid Cap Screw Counterbore Set 3 Flute Straight Shank 7 Pc 508S-0007

  • Inch Set (7 PC) : 6#, 8#, 10#, 1/4'', 5/16'', 3/8'', 1/2''.
  • Cap screw counterbores are tools that are used to create a recess in a workpiece for the head of a cap screw. You might use a cap screw counterbore when you need to attach a component to your workpiece using cap screws, and the component has a thickness that is greater than the length of the cap screw..
  • Another reason you might use a cap screw counterbore is if you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece. A cap screw counterbore allows you to create a recess in the workpiece that is sized to fit the head of the cap screw, giving the screw a flush or countersunk appearance..
  • Overall, cap screw counterbores can be useful when you need to attach components to a workpiece using cap screws, or when you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece..
Check Stock

Accusize Industrial Tools 7 Pc Metric Hss Solid Capscrew Counterbore Set 3 Flute Straight Shank 508S-007m

  • Metric Set (7PC): M3, M4, M5, M6, M8, M10, M12. 3 Flute..
  • Cap screw counterbores are tools that are used to create a recess in a workpiece for the head of a cap screw. You might use a cap screw counterbore when you need to attach a component to your workpiece using cap screws, and the component has a thickness that is greater than the length of the cap screw..
  • Another reason you might use a cap screw counterbore is if you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece. A cap screw counterbore allows you to create a recess in the workpiece that is sized to fit the head of the cap screw, giving the screw a flush or countersunk appearance..
  • Overall, cap screw counterbores can be useful when you need to attach components to a workpiece using cap screws, or when you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece..
Check Stock

Accusize Industrial Tools Premium Metric H.S.S Solid Cap Screw Counterbore Set 3 Flute Straight Shank 7 Pc 509S-007M

  • High Speed Steel. Straight Shank. Metric Set(7 Pcs/Set): M3, M4, M5, M6, M8, M10, & M12.
  • Cap screw counterbores are tools that are used to create a recess in a workpiece for the head of a cap screw. You might use a cap screw counterbore when you need to attach a component to your workpiece using cap screws, and the component has a thickness that is greater than the length of the cap screw..
  • Another reason you might use a cap screw counterbore is if you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece. A cap screw counterbore allows you to create a recess in the workpiece that is sized to fit the head of the cap screw, giving the screw a flush or countersunk appearance..
  • Overall, cap screw counterbores can be useful when you need to attach components to a workpiece using cap screws, or when you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece..
Check Stock

2 Axis Metal Case LCD DRO Digital Readout Display for Mill Milling/Lathe Machine (2 Axis DRO)

  • 【Special Function】1:Tool radius compensation: In the use of cylindrical milling tool carrier, the tool radius must be taken into account. The direction of process will decide the increase or decrease of calculated value .Once the tool number is inputted, the DRO value will be saved. 2 :Determine the workpiece centre: Only through the tool or touching the two points of workpiece, the DRO can calculate the workpiece centre.
  • 3 :200 sets tool base: While repeat the same process in the workpiece, you can store the tool value which will be convenience to the operator Round arc processing: Sample round processing and two axis arc processing.
  • 4:Slope calculation: Input the two points of workpiece, the DRO can calculate the slope of the workpiece..
Check Stock

Pneumatic Clamp 1/8\ Intake Interface High Strength Pneumatic Hold Fixture for Welding

  • The operation is simple, and it is easy to realize automatic control, and the clamping type work can be performed without using artificial force..
  • It can stably ensure the machining accuracy of the workpiece. When the workpiece is clamped with pneumatic clamps, the positional accuracy of the workpiece relative to the tool and the machine tool is guaranteed by the fixture, which is not affected by t.
  • It can expand the scope of use of machine tools and realize multi-function of one machine. The use of special pneumatic clamps can change the purpose of the original machine tool and expand the scope of use of the machine tool to realize multi-function o.
  • The pneumatic reaction speed is fast and the testability is high, so the test time is shortened and the production efficiency is improved in the production process..
  • It can reduce the auxiliary working hours, improve the labor productivity, and clamp the workpiece with the pneumatic clamp. The workpiece can be quickly positioned and clamped without the need of alignment, which significantly reduces the auxiliary work.
Check Stock

Pneumatic Clamp, 1/8\ Intake interface Metal Cylinder Pneumatic Clamp Hold 50KG Clamp Force,Reduce The Labor Intensity of Workers

  • The operation is simple, and it is easy to realize automatic control, and the clamping type work can be performed without using artificial force..
  • The pneumatic reaction speed is fast and the testability is high, so the test time is shortened and the production efficiency is improved in the production process..
  • It can stably ensure the machining accuracy of the workpiece. When the workpiece is clamped with pneumatic clamps, the positional accuracy of the workpiece relative to the tool and the machine tool is guaranteed by the fixture..
  • It can reduce the auxiliary working hours, improve the labor productivity, and clamp the workpiece with the pneumatic clamp. The workpiece can be quickly positioned and clamped without the need of alignment, which significantly reduces the auxiliary work..
  • It can expand the scope of use of machine tools and realize multi-function of one machine. The use of special pneumatic clamps can change the purpose of the original machine tool..
Check Stock

WEN PM01 Wooden Lathe Pen-Turning MT1 Mandrel

  • Tapered Morse maximizes compatibility with most MT1 wood lathes.
  • 1/4-inch diameter shaft (7mm) runs through the center of the workpiece.
Check Stock