Categories

Best Workshop Machinery

2.5\ x 10' Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!

  • ...plications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1..
  • This PVC hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses..
  • While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose t....
Check Stock

YJINGRUI LED Industrial Signal Tower Light 3 Colors Flash LED 180°Folding Light with Buzzer Alarm Warning Lamp for CNC Machines Red Yellow Green 100db (DC 24V)

  • LUBAN Industrial Signal Stack Tower Lights, adopting high performance LED chips as the light source to provide high brightness light with lower power consumption and at least 50,000 hours long lifespan.
  • This Tower Light equipped with prism-cut PC lampshade lenses for even light distribution, it has a 360-degree viewing angle, with a height adding pole, it's easily viewed at a distance in the workshop.
  • Each level equips 3x3 continuous light LED chips in 3 different directions, 90dB hi-frequency buzzer alarm optional for adding an audible warning to be heard above the noise of surrounding machinery.
  • Standard aluminium pole length 6 inches with L-bracket for mounting installation (When not using an L-bracket, make a fitting hole of φ18-20mm).
  • These Andon Lights for use in factories or on industrial machinery. Typically used as Automated machinery status indicator lights, operation signal lights, safety warning lights.
Check Stock

2 1/2 x 20 Clear PVC Dust Collection Hose For Use with Dust Collectors with 2-1/2 Ports Ideal for Shop Vacuums

  • ...plications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1..
  • This PVC hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses..
  • While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose t....
Check Stock

4 inch diameter x 10 foot long Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!

  • ...plications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1..
  • This PVC hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses..
  • While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose t....
Check Stock

5\ x 10' (5 inch diameter by 10 feet long) Ultra-Flex Clear Vue Heavy Duty PVC Dust, Debris and Fume Collection Hose - MADE IN USA!

  • ...plications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1..
  • This PVC hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses..
  • While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose t....
Check Stock

6 x 10 6 inch diameter by 10 feet long Ultra-Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose - MADE IN USA!

  • ...plications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1..
  • This PVC hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses..
  • While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose t....
Check Stock

Master Magnetics 7583 Magnetic Cup Caddy Holder - Black - Keep Your Favorite Beverage at Hand

  • Magnetic Cup Caddy allows you to keep your favorite beverage at hand, whether in the garage, workshop, office, outdoors and more!.
  • Powerful magnet attracts to any ferrous metal surface including toolboxes, filing cabinets, grills, or even heavy machinery and equipment!.
  • Extremely versatile! The Caddy holds travel mugs, aluminum cans, water bottles, pray cans, pens, pencils, small tools and more!.
  • Made of durable plastic with a protective rubber liner to prevent surface scratches..
  • Measures: 4.75”l x 3.5”. Holds containers up to 3.25” dia. at base..
Check Stock

The Lord of The Rings: The Fellowship of the Ring (Extended Edition)

  • ...lution for the everyday woodworker with a smaller to midsize workshop..
  • This cyclone kit will help protect your dust collector from unnecessary wear and tear. Once installed on a barrel, box, or any container (barrel or box not included), this dust and debris separator keeps the larger, heavier chips coming from you machinery from getting into your dust collector impeller. This will ad years to the life of your dust collector and help keep your bag emptying chores to a minimum..
  • The working theory behind cyclone separators is that the heavier wood chips fall to the bottom of the container while the lighter dust particles get pulled in the out feed port and into your dust collector or vacuum. This keeps the large debris from slamming into your dust collector’s impeller or filling up your shop vacuums container to quickly. This also helps prevents any unnecessary damage to dust collector impellers..
  • Another advantage to using cyclone style separators is that your bottom bag on dust collector machines or shop vacuum containers won’t fill up nearly as quick than they would without a cyclone style separator. This means you can use the cyclone separator with your planer, jointer or router tables without having to empty the bag or vacuum containers ne....
Check Stock

Durability Spring Balancer Hook Tool Balancer with Steel Cable High-Strength Balancer for Hanging Work Hanging Equipment

  • Built-in self-locking control system of the tower wheel locks the hanging objects.
  • The cable is made of high-quality steel, which is corrosion-resistant, has long service life and strong bearing capacity.
  • Used in occasions as construction site, factory, workshop, automobile equipment, machinery manufacturing, etc.
  • Used for hanging variety of tools to improve working efficiency.
Check Stock

INTSUPERMAI Grease Pump Lubricator Air Pneumatic Compressed High Pressure Auto Tool 12 Gallon Air Pneumatic Lubricator

  • This pneumatic grease injector is an essential professional equipment of the mechanization of oil injection..
  • It is widely applicable to automobile industry, shipbuilding industry, engineering machinery, chemical industry, etc..
  • Design of universal casters.Easy to install and operate.More efficient to use, improve working life..
  • Is a must-have tool for lubrication in workshop, garage, plant or building market..
  • Pressure regulation of high viscosity media. High quality material, durable.Blocking the propagation of sound waves, allowing air flow through.Effectively controling the noise..
Check Stock

HUAYY Heavy Duty Furniture Leveler Legs 2 Inch Height Adjustable feet and Hexagon Nuts Lock(4 Pack)

  • Leveler Total Height: 3 Inches.Leg Base Diameter: 1-1/4 Inches.2 Inches Height Adjustable..
  • Hexagon nuts lock,An absolute MUST for the workshop or garage, especially if vibrating machinery is involved..
  • You get 4 Legs, 16 Self-Tapping Stainless Steel Screws and 16 Sheet Metal Screws,one 5mm inner hexagon spanner..
  • Free spinning foot,inner hexagon spanner for adjust ,Compensates for irregular floors..
  • Manufactured by HUAYY.Other sellers are selling products that don’t match our description. Please give us feedback and complain to amazon. Thank you..
Check Stock

4 inch Dust Separator Cyclone Dust Collector Kit for Use with Barrels Trash Cans Buckets or Custom Built Containers

  • ...lution for the everyday woodworker with a smaller to midsize workshop..
  • This cyclone kit will help protect your dust collector from unnecessary wear and tear. Once installed on a barrel, box, or any container (barrel or box not included), this dust and debris separator keeps the larger, heavier chips coming from you machinery from getting into your dust collector impeller. This will ad years to the life of your dust collector and help keep your bag emptying chores to a minimum..
  • The working theory behind cyclone separators is that the heavier wood chips fall to the bottom of the container while the lighter dust particles get pulled in the out feed port and into your dust collector or vacuum. This keeps the large debris from slamming into your dust collector’s impeller or filling up your shop vacuums container to quickly. This also helps prevents any unnecessary damage to dust collector impellers..
  • Another advantage to using cyclone style separators is that your bottom bag on dust collector machines or shop vacuum containers won’t fill up nearly as quick than they would without a cyclone style separator. This means you can use the cyclone separator with your planer, jointer or router tables without having to empty the bag or vacuum containers ne....
Check Stock

Power Tool Essentials - The Drill Press & Mortiser

  • IP66 Water Proof: Led Work light is made of high-quality aluminum alloy light head, Added water proof rubber ring, It can protect against the water spray generated by the machine..
  • Power and voltage: Input voltage range is 110 to 220V, of course can input 120V.
  • 120 LEDs,30W luminous flux is 3000 lumens, longer life than halogen lamps, more energy saving..
  • Flexible bracket: Two-section aluminum alloy bracket, approximately 20 inches in length, with three rotatable nodes that adjust the direction of illumination..
  • Mounting type: fixed by four screws and equipped with mounting parts to make it more stable and safer. Hole diameter 5mm (0.2 inch).
  • Scope of application: Suitable for all types of machine tools, Such as CNC, Punching, Lathe, Drilling machine, Car repair shop, Equipment, Machinery workshop, Woodworking workbench, Sewing machine..
Check Stock