Categories

Best Worm Gear Gearhead

Penck 12 Pack 3/4 Inch Hose Clamps Stainless Steel Clamps Worm-Gear Hose Clamp Miniature Power-Seal Worm-Drive Kit 13-19mm Range

  • 304 Stainless steel worm gear clamp consists of a stainless steel band, housing, and screw..
  • They can adjust the miniature size for fitting small hoses. A worm gear mechanism adjusts the clamp's diameter to precisely apply sealing pressure..
  • The slotted screw allows installation using a blade screwdriver, nut driver, or socket wrench. Hose clamps attach hoses to fittings to prevent flow leakage. They come in a variety of designs and distribute uniform pressure over the circumference of hoses to bind them to fittings..
  • Worm Gear Hose Clamps are flexible and ductile with wide adjustable size about 1/2'' - 3/4'' (13-19mm). Fit for hose outside diameter 1/2'' - 3/4'' (13-19mm)..
  • You Can Adjust The Size According To Demand, Worm Friction Is Small, Lock Secure And Tight..
Check Stock

Magisale Garage Door Parts Bracket Adjustable Reinforcement Bracket, Carbon Steel Zinc Plated

  • VIRTIONZ replacement Gear & Sprocket Kit for LiftMaster Sears Craftsman 41C4220A, 41A2817 Garage Door.
  • Specs - Large Gear: 2 3/4" x 1/2" with 1/2" bore. Worm Gear: 1 1/8" Outside Diameter with 1 1/4" wide teeth..
  • Includes - (1) Gear & Sprocket Kit with Worm Gear, Grease, Motor Shaft Bearings, Sprocket Bearings & Hardware.
  • If your garage door opener is a 1/2 HP or 1/3 HP chain drive model with a production date of 1984 to present, this kit will be compatible.
  • Do NOT use for garage openers with dual sprockets on the output shaft.
Check Stock

Plastic Gears Set Pulley Belt Worm Kits Crown Gear Set Robot Motor Toy DIY Parts for Model Amateur(64 new gear packs)

  • Worm and worm gear Coincide distance from the center distance is 8 mm.
  • 1pairs x 0.5 Modulus Small Reduction Ratio of 1:10 Motor Output Copper Worm Wheel Gear For DIY.
Check Stock

LiftMaster Gear and Sprocket Assembly 41A5658 - G2595

  • The ROP Shop replacement Gear & Sprocket Kit for LiftMaster 1245LK, 1250, 1255, 1255R, 1260 Garage Doors.
  • Specs - Large Gear: 2 3/4" x 1/2" with 1/2" bore. Worm Gear: 1 1/8" Outside Diameter with 1 1/4" wide teeth. Refer to images 2 & 3 for more information.
  • Includes - (1) Gear & Sprocket Kit with Worm Gear, Grease, Motor Shaft Bearings, Sprocket Bearings & Hardware.
  • Compatible with Residential Chamberlain, Liftmaster, Sears Craftsman, Master Mechanic and Garage Master, 1/2, 1/3, 3/4 HP chain drive models manufactured 1984 to present.
  • Do NOT use for garage openers with dual sprockets on the output shaft.
  • Not compatible with Sears openers made before 1984 - body color of powerhead unit: brown, green, or yellow.
Check Stock

CNBTR 0.5 Modulus Brass Metal Speed Reducer with 60 T Wheel 5mm Bore Gear Shaft

  • [Product Type] Size 1: Brass Gear Wheel: 0.5 Modulus, 60T, Hole Diameter: 6mm/0.24inch, Gear: 31x12mm/1.22x0.47inch (DxH). Size 2: Brass Gear Shaft: 0.5 Modulus, Hole Diameter: 5mm/0.2inch, Overall Length: 20mm/0.79inch..
  • [Material] Made of brass material, not easy to wear, durable and lasting performance. This gear wheel & shaft are the excellent industrial replacement accessory..
  • [Function] The transmission structure of gear shaft is simple, compact, small volume and light weight. Easy to install and use..
  • [Package] The item contains one 0.5 modulus brass worm gear shaft and one 60T brass worm gear wheel..
  • If you have any question about the product, feel free to contact the CNBTR Service and we will try our best to give you a satisfactory answer..
Check Stock

Garage Door Replacement Parts Gear for Linear Moore-O-Matic XX150, X150X-S

  • Genie Garage Opener Drive Worm Gear - Part # 27090A Genie garage door opener is a replacement drive worm gear..
Check Stock

CNBTR 4mm Bore Hole Diameter Brass Gear Shaft with 60 T Wheel 0.5 Modulus Set Drive Gear Box Shaft

  • Set include one 0.5 modulus 4MM Hole Dia brass gear shaft and one 60 T brass worm gear wheel..
  • The transmission structure of worm shaft is simple, compact, small volume and light weight..
  • Shaft Z1=1, turn a round of gear T, can get a large transmission ratio, generally in the power transmission, the transmission ratio I=10-80, like big transmission ratio, if use with gear transmission, will need to take the multi-stage transmission..
  • High quality material selection, carefully processing create high quality product..
Check Stock

Bringsmart JGY-370 12V 10rpm DC Worm Gear Motor 12 Volt High Torque Engine Mini Turbine Worm 12V Reducer Electric Motor Self-locking for DIY Mini Geared Motor (JGY-370 12V 10rpm)

  • ALL-METAL GEARS, high-temperature resistance, high abrasion resistance, strong load capacity, sturdy and durable, effectively protect the turbo worm gear box motor body..
  • D SHAPED OUTPUT SHAFT, using high hardness steel, good toughness, impact resistance, the quality of the bearing and the service life of the turbo worm gear motor are improved, extremely durable.
  • GEAR DC MOTOR with MICRO-TURBINE WORM, you can change the wiring-connection to change motor rotation. Low noise and high torque..
  • Application: Label machines, remote control curtains, automatic voltage regulators, barbecue grills, ovens, washers, waste disposal machines, household appliances, coin machines, paper currency recognizers, automatic actuators, coffee machines, towel machines, printing machines and Stage lighting. This section is suitable for small motor configuration high speed ratio, the installation space is limited occasions, large torque output..
Check Stock

Cloudray Mechanical Parts Set Inner Sliding Rails 1300x900 Single Head For CO2 Laser engraver Engraving Cutting Machine

  • Application size: Stepper motor 8mm to 11mm bore adapter.
  • Turbine reducer shaft sleeve 8mm to 11mm bore adapter for worm gear reducer shaft sleeve.
Check Stock

GLIDESTORE Worm Gear Clamp Stainless Steel for Home Brewing Plumbing Automotive and Mechanical Applications Beer Line Clamps 10-16mm 0.39 -0.63 Pack of 15

  • ✔ 100% MONEY BACK GUARANTEE: Customer satisfaction is our utmost priority. If you are dissatisfied with Worm Gear Clamp Stainless Steel, drop us a....
  • ✔ HIGH-END MATERIAL: Worm Gear Clamp Stainless Steel made of 201 stainless steel, constructed to resist scaling and corrosion and ensure long- term....
  • ✔ AMAZING FUNCTION: These Worm Clamp are used to lock the hose tightly with a view to preventing flow leakage. This hose clamp assortment kit can be....
  • ✔ EASY TO USE: Can be simply loosened or tightened by using the adjustable handle without any oth.
  • ✔ HUGE QUANTILY, SMALL COST: Each package consists of 15 pack Beer Line Clamps, the size of each clamp is about 10-16mm (0.39 inch-0.63 inch).
Check Stock

Gear and Sprocket Replacement Kit for Liftmaster 41c4220a, fits Chamberlain, Sears, Craftsman 1/3 and 1/2 HP Chain Drive Models (Chain Drive Gear and Sprocket Kit)

  • Kit Includes: Gear and sprocket, worm gear, grease, motor shaft bearings, sprocket bearings..
  • Compatible with Chamberlain, Sears, Craftsman and LiftMaster 1/3 and 1/2 HP chain drive models..
  • Compatible with chain drive Chamberlain Sears Craftsman manufactured operators 1984-current..
  • Installation: Step-by-step instructions included, free tech support available. This OEM kit 041c4220a includes all of the 41A2817 Drive / Worm Gear kit, and is easier to install because you do not have to disassemble the output shaft assembly - the spur gear is already mounted on the new output shaft..
Check Stock

Grizzly Industrial T28173-14\ x 78\ Heavy-Duty Roller Table with Work Stop

  • The table top can be adjusted by 360° rotation.
  • Countertop 360° scribing for easy reading.
  • Precision shafting design, adjustable shaft clearance and good stability.
  • Finished worm gear drive with large reduction ratio and high precision.
  • The air-back structure ensures that the worm and the worm are fully meshed, reducing the movement of the table.
  • The upper and lower sides have standard hole spacing connection holes, which are convenient to connect with other stages to form a multi-dimensional mobile station..
Check Stock

Ologymart 75 Type Plastic Crown Gear Single Double Reduction Gear Worm Gear

  • Includes spindle gear,crown gear,sigle gear,double gear,worn gear,bevel gear,belt pulley,belt,connecting rack,axle sleeve,tee collar.
  • Pieces 75, ideal for DIY science and small production, product design and mechanical model.
  • 19X Double Reduction Gear(each one) 12X Single Reduction Gear(each on) 11X Crow Gear(each one).
  • 2x Worm Gear(each one) 9X Spindle Gear(each one) 7X Belt Pulley(each one) 6X Axle Sleeve(each one).
  • 5X Belt(each one) 2X Connectiong Rack(each one) 1X Tee Collar.
Check Stock