Dbgogo Counterflow Wort Chiller, 32.8’ Homebrew Stainless Steel Heat Exchanger Hot Liquid Accelerated Cooler for Brewing Kettle Mash Tun

  • High Efficient & Easy to Clean - This immersion wort chiller used for cooling beer or malt. The beer wort chiller transfers heat more efficiently and is easy to clean..
  • High performance & Quick Cooling - The home brew wort cooler cools the wort down to a temperature where you can add beer yeast, which is part of what turns the wort into delicious beer. It has reliable performance and quick wort cooling process. Our wort chillers are up to the task whether it's winter or summer..
  • Package includes a garden hose connection, so you can brew outside, you can also connects to a laundry sink faucet as your chilling water source..
  • Dimension - 3.94inch x 7.87inch x 13.78inch/10cm x 20cm x 25cm(coil diameter x coil height x inlet height) copper immersion wort chiller, 2 pcs 1.5m/4.92feet vinyl tubing..
  • Package List - Package includes home brew wort chiller, 2 pcs vinyl tubing, one garden hose fitting and 2 hose clamps..
Check Stock

NY Brew Supply - COMINHKPR96442 Stainless Wort Chiller with Garden Hose Fittings, 1/2\ x 50', Silver (AZ-W1250-SG)

  • Wort Chiller: Stainless Steel Beer Cooling Coil Suitable for connection to water circuit for even faster cooling..
  • Beer Brewing Wort Chillers: This cool the cooked wort quickly. Let the wort reach your preferred temperature for Yeast inoculation..
  • Stainless Steel Wort Chiller Coil: The beer chiller is made up of stainless steel material, durable and solid for use..
  • Beer Cooling Coil Pipe: Diameter size about 9.52mm, thickness size about 0.6mm, length size about 8.8m..
  • This Domestic Beer Cooler is used to cool beer or malt. The wort can be boiled completely after 15 minutes..
Check Stock

MRbrew Homebrew Magnetic Beer Pump Commercial Stainless Steel 1/2’’ NPT Thread Head Quiet Circulation Operation Excellent High Temperature Resistance System Wort Brewing Pump

  • ...ransferring speed in a more reasonable manner, save time and effort, save cost..
  • 【High End Stainless Steel】This magnetic wort brewing pump features a 1/2 inch male NPT thread head, which is made of commercial grade 304 stainless steel and can be connected to 1/2'' female thread quick disconnect working with wort chiller to increase wort cooling rate, high resistance to wear and tear, not easy to get rust, durable beer wort pump brings a healthy brewing life..
  • 【No Leak, Good Sealing】This wort brewing circulation pump has a closed static sealing shaft, the brewing pump thread is cut well and will fit brewing tools perfectly, which will greatly achieve excellent sealing and avoid wort beer liquid leakage, this amazing liquid circulation beer pump is easier to make wort transferred to the brewing mash tun faster and efficiently..
  • 【Increase wort transferring rate efficiently】MRbrew 1/2" male NPT thread fitting wort brewing pump has a tremendously low restriction, which makes it ideal for working with plate wort chiller or immersion wort chiller to do gravity transferring, improves wort transferring speed, allow for more mounting options and add the ultimate flexibility during brew day, excellent repeatable-using brewing wort pump runs smoothly an....
Check Stock

Northern Brewer - Copperhead Copper Immersion Wort Chiller for Beer Brewing

  • The copper brother to our customer favorite Silver Serpent, the sleek Copperhead 25-foot copper immersion wort chiller is the fast way to cool your wort to pitching temps!.
  • Simply drop your clean chiller into the kettle a few minutes before the end of the boil and it will be ready to go..
  • Brew with peace of mind like never before. Drop-angle connections keep surprise leaks outside your kettle and away from cooling wort..
  • Standard garden hose connection allows for brewing outside or connects to a laundry sink faucet as your chilling water source..
  • Comes fully assembled with tubing, barbed fittings, and hose clamps..
Check Stock

NY Brew Supply Copper Wort Chiller Medium

  • This Immersion Chiller is Designed for 5 Gallon Batches, and Will Cool Your Wort in Minutes, High Quality Brass Garden Hose Fittings Are Attached to....
  • An Instruction Sheet is Included With Information on How to Use and Care for Your Wort Chiller.
Check Stock

Super Efficient 3/8\ x 25' Stainless Steel Wort Chiller w/ GH Fittings

  • - This wort chiller is used for cooling beer or malt..
  • - Complete disinfection can be achieved after 15 minutes wort boiling..
  • - This cool the cooked wort quickly. Let the wort reach your preferred temperature for Yeast inoculation ..
Check Stock

Northern Brewer Stainless Steel Counterflow Wort Chiller

  • Chill your wort like the professionals do!.
  • A full 18' of contact area for your wort! The tube-within-a-tube design allows for hot wort to flow through the chiller in one direction, while cooling water flows the opposite direction in a cooling jacket surrounding the wort..
  • Threaded Stainless Steel Fittings for ALL Connections (unlike units from other manufacturers). No Brass Connections and No flimsy tubing clamps required..
  • Solidly constructed of 304 grade stainless steel with 1/2" NPT Wort Fittings and Male Garden Hose Threaded Water Fittings..
  • Low Flow Restriction: Gravity feed your wort or use a pump. The choice is yours!.
Check Stock

Super Efficient 3/8\ x 25' Stainless Steel Wort Chiller

  • Perfect for the kitchen homebrewer that is making extract batches. Typically, with extract batches you boil a smaller amount of concentrated wort (1-3 gallons) and then add clean cool water before adding the yeast..
  • The compact 15' copper immersion chiller is the perfect size for these batches and easily connects to your kitchen sink with a sink adapter (not included)..
  • Made in the USA (Michigan) from pure 3/8” copper tubing..
  • Leak free compression barbs keep your immersion chiller from leaking back into your wort during the chilling process..
  • Vinyl tubing comes assembled with (2) 4’ lengths, or 8 feet total..
  • The inlet has a standard heavy duty female garden hose fitting, also made in the USA..
  • 6.75" x 3" x 14" (coil diameter x coil height x inlet height).
Check Stock

Northern Brewer Deluxe Homebrew Starter Kit, Equipment and 5 Gallon Recipe (Fresh Squished IPA)

  • A 30' wort chiller is the perfect size if you are making full boil extract kits or making smaller all grain batches (3-6 gallons)..
  • Made in the USA (Michigan) from pure 3/8” copper tubing..
  • Leak free compression barbs keep your immersion chiller from leaking back into your wort during the chilling process..
  • Vinyl tubing comes assembled with (2) 4’ lengths, or 8 feet total..
  • The inlet has a standard heavy duty female garden hose fitting, also made in the USA..
  • It can easily connect to your kitchen sink with a sink adapter (not included).
  • 9" x 4.25" 18" (coil diameter x coil height x inlet height.
Check Stock

Stainless Steel Beer Cooling Coil, Home Brewing Immersion Wort Chiller Pipe Bar Wine Making Machine Part 8.8M Cooling Coil Pipe(Silver)

  • A 60' wort chiller is the perfect size for all grain brewers making 6-11 gallon batches..
  • Made in the USA (Michigan) from pure 3/8” copper tubing..
  • Leak free compression barbs keep your immersion chiller from leaking back into your wort during the chilling process..
  • Vinyl tubing comes assembled with (2) 4’ lengths, or 8 feet total..
  • The inlet has a standard heavy duty female garden hose fitting, also made in the USA..
  • It can easily connect to your kitchen sink with a sink adapter (not included).
  • 9" x 9.5" x 20" (coil diameter x coil height x inlet height).
Check Stock

Coldbreak Homebrew 1-3 Gallon Batch Copper Immersion Wort Chiller 3/8 x 15 Pure Copper Leak Free Compression Barbs Vinyl Tubing and Garden Hose Fitting Included USA Made

  • Perfect for the kitchen homebrewer that is making extract batches. Typically, with extract batches you boil a smaller amount of concentrated wort (1-3 gallons) and then add clean cool water before adding the yeast..
  • The compact 15' copper immersion chiller is the perfect size for these batches and easily connects to your kitchen sink with a sink adapter (not included)..
  • Made in the USA (Michigan) from pure 3/8” copper tubing..
  • Leak free compression barbs keep your immersion chiller from leaking back into your wort during the chilling process..
  • Vinyl tubing comes assembled with (2) 4’ lengths, or 8 feet total..
Check Stock

Blichmann Therminator, Beer Wort Chiller, Stainless Steel, 1/2\ Male NPT Fittings, 3/4\ male garden hose threads, Includes Back Flush Hose Assembly

  • Blichmann Therminator Stainless Wort Chiller.
  • Includes Blichmann - Therminator Back Flush Hose Assembly.
Check Stock

Northern Brewer - Silver Serpent Stainless Steel Immersion Wort Chiller

  • A simple tweak, adding barbed fittings and a drop-angle to our favorite immersion chiller, spawns a new best-in-class product. Introducing Silver....
  • Simply drop your clean chiller into the kettle a few minutes before the end of the boil and it will be ready to go..
  • Brew with peace of mind like never before. Drop-angle connections keep surprise leaks outside your kettle and away from cooling wort..
  • Standard garden hose connection allows for brewing outside or connects to a laundry sink faucet as your chilling water source..
  • Comes fully assembled with tubing, barbed fittings, and hose clamps..
Check Stock