Categories

Best Wp Tungsten Electrode

RX WELD 28pcs/set New Pyrex TIG Welding Torch Gas Lens #4#5#6#7#8 Pyrex Cup Kit for Tig WP-17/18/26 Torch Welding Accessories

  • 28pieces TIG Torch Accessories (consumables).
  • With excellent plasticity, toughness and crack resistance, especially low temperature impact toughness higher. Uses: for a variety of locations of the pipeline TIG welding arc welding and arc welding, can be satisfied with the welding joints. Can be welded carbon steel and some low alloy steel..
  • Region free and easy to use, can be used for WP-17 WP-18 WP-26 TIG Welding Torch..
  • Its electric conductivity is most closed to 2% thoriated tungsten electrode at either AC or DC, and no need any welding program changes..
  • Applicable to Machine such as Rilon, Riland, Jasic, Mitech, Chiry, UNT, Krypton, Longetivity, Berlan and so on..
Check Stock

Zinger 53pcs TIG Welding Torch Stubby Gas Lens #10 Pyrex Glass Cup Kit Accessories for DB SR WP-17/18/26 TIG Welding Torch,with Cup+Back Cup+Nozzle+Collet+Collet Body+Gas Lens+Cup Gasket

  • Packing including: The 53pcs tig welding torch stubby gas lens kit accessories including---4pcs TIG Stubby Gas Lens + 4pcs TIG Gas Lens Collets Body + 12pcs TIG Collets+6pcs #10 Pyrex Glass Cup + 10pcs TIG Alumina Nozzle+3pcs TIG back cup+ 2pcs Gasket Cup+12pcs Temperature Resistant O-rings.
  • Fit for: 17 & 26 series air cooled torches + 18 series water cooled torches, Lincoln torch model #---PTA-17/PTA-18/PTA-26 , Miller Diamondback torch model#--DB17/DB18/DB26 AND the Weld craft WP-17/ WP-18 /WP-26.
  • Electric conductivity similar with: 2% thoriated tungsten electrode.
  • Applicable machine: Mitech, Longetivity,Rilon, Krypton, Riland, Jasic, Chiry, UNT, Berlan etc.
Check Stock

Tungsten Electrodes for Tig Welding 2% Grey Ceriated Tungsten Assorted- 5PCS 3/32 + 5PCS 1/16

  • Premium 10PK tig welding tungsten electrodes 2% ceriated gray WC20/EWCe-2, 5PCS 1/16" & 5pk 3/32" ceriated tungsten electrodes for tig welding.
  • The ceriated tungsten tig electrode is with high performance: No spitting,stable consistent arc starts and good stability with low burn-off rate..
  • The 2% ceriated tungsten electrode perform reliably and consistently even in high current range on AC&DC applications for welding copper alloys, nickel alloys, titanium alloys,low-alloyed steels,magnesium alloys and aluminum alloys.
  • The tungsten electrodes adhere to American Welding Society AWS standards,great for beginner to professional tig welder for tig welding works.
  • Package including: 5PCS 1/16" & 5PCS 3/32" by 7"length 2% grey ceriated tungsten, Tungsten Electrode Size: 3/32" x 7"(2.4mm x 175mm )AND 1/16" x 7"(1.6mm x 175mm).Warm tips:We'll send the tungsten electrodes with old and new package at random. We guarantee with the same high quality.
Check Stock

2% Thoriated TIG Welding Tungsten Electrodes 3/32” x7” 10-Pack

  • TOP QUALITY 3/32" 2% Thoriated Tungsten Electrodes for TIG Welding.
  • TOP RATED Ten (10) Pack of 2% Thoriated Tungsten Electrodes.
  • TOP VALUE Savings Up to 50% Off Other Marketplace Sellers.
  • TUNGSTEN ELECTRODE SIZE: 3/32" x 7" or 2.4mm x 175mm.
  • TUNGSTEN ELECTRODE MATERIAL: 2% Thoriated (Red) EWTh-2 Material Conforms to: ANSI/AWS A5.12, JIS, DIN EN 26848, ISO 6848..
Check Stock

3mirrors ALUMINUM Tungsten Electrode Sharpener Grinder Head TIG Welding Tool with Cut-Off Slot Multi-Angle & Offsets, 5X 25mm Double Diamond Wheels, 1X Connecting Rod

  • Premium 10PK purple rare earth blend (EWG) tig welding tungsten electrodes , 5pk 1/16" & 5pk 3/32" purple tungsten electrodes for tig welding.
  • The purple tungsten tig electrode is with great welding performance: non radioactive, reliable arc-striking, low burn-off rate and good stability with low burn-off rate..
  • The rare earth blend tungsten electrode perform reliably and consistently even in high current range on AC&DC applications for welding copper alloys, nickel alloys, titanium alloys,low-alloyed steels,magnesium alloys and aluminum alloys.
  • The tungsten electrodes adhere to American Welding Society AWS standards,great for beginner to professional tig welder for tig welding works.
  • Package including: 5PCS 1/16" & 5PCS 3/32" by 7"length rare earth blend (EWG) tungsten, Tungsten Electrode Size: 3/32" x 7"(2.4mm x 175mm )AND 1/16" x 7"(1.6mm x 175mm).Warm tips:We'll send the tungsten electrodes with old and new package at random. We guarantee with the same high quality.
Check Stock

2% Lanthanated TIG Welding Tungsten Electrodes 3/32” x 7” 10-Pack

  • TOP QUALITY 3/32" 2% Lanthanated Tungsten Electrodes for TIG Welding.
  • TOP RATED Ten (10) Pack of 2% Lanthanated Tungsten Electrodes.
  • TOP VALUE Savings Up to 50% Off Other Marketplace Sellers.
  • TUNGSTEN ELECTRODE SIZE: 3/32" x 7" or 2.4mm x 175mm.
  • TUNGSTEN ELECTRODE MATERIAL: 2% Lanthanated (Blue) EWLa-2 Material Conforms to: ANSI/AWS A5.12, JIS, DIN EN 26848, ISO 6848..
Check Stock

Baluue TIG Welding Tungsten Electrodes Ground Finish Welding Rods Thoriated Electrodes for WP

  • lanthanated tungsten rods Multiple choices for your high-quality welding..
  • lanthanated electrode Pure Tungsten forms a clean, balled tip when heated and provide great arc stability for AC welding with a balanced wave..
  • Welding Tungsten Electrode Rod Good mechanical cutting performance, good electrical conductivity, easy operation and long service life..
  • tig tungsten Smallest electron emission, low steam pressure, low resistance and good electrical conductivity..
  • ground annealed Tungsten electrodes Pure tungsten welding electrodes also provide good arc stability for AC sine wave welding, especially on aluminum and magnesium..
Check Stock

GOONSDS Tungsten Filament 99% Purity Tungsten Metal Wire Coil,Length 1m,Diameter 0.04mm

  • Purity: W ≥ 99% . Dimensions: diameter:0.04-0.1mm(Buy on demand) , length:1m. Package: 1 x Tungsten wire.
  • Tungsten and its alloys are widely used in electronics and power industry because of its strong plasticity, low evaporation rate, high melting point and strong electron emission ability. For example, due to its high luminous efficiency and long service life, tungsten filament is widely used in the manufacture of various bulb filaments, such as incandescent lamp, iodine tungsten lamp, etc,.
  • Tungsten wire is used to make direct hot cathode and grid of electronic oscillator tube and side hot cathode heater in various electronic instruments. The properties of tungsten make it suitable for TIG welding and other electrode materials similar to this kind of work..
  • It is widely used in aerospace, aviation, oil drilling, electrical instrument and other industries, such as manufacturing heat sink, balance weight of control rudder and contact materials of switch, circuit breaker, spot welding electrode, etc..
  • We are a supplier of high quality metal materials. We can provide you with the materials you need. You can contact us to get any materials you need.
Check Stock

YESWELDER 145A ARC MMA Stick Welder with Lift TIG Torch, Digital Display 110/220V Dual Voltage IGBT Inverter Welder Built-in Hot Start ARC force, Stick MMA/Lift TIG 2 in 1 Portable Welding Machine

  • More powerful :Up to 145 more amps, Ideal performance for most 6010, 6011, 6013 and 7018 rods.
  • Lift TIG Mode: Come with WP-17V gas valve lift tig torch, Simply touch the tungsten to the work piece and lift off,it's like getting a tig welder for free.
  • Safety：Automatic compensation for voltage fluctuation, over current protection, over load protection,temperature control.
  • Automatic Hot Start：boosts the current during starting to provides easy, quick and reliable arc starts.
  • Auto Adaptive Arc Force：Minimizes electrode sticking in the puddle without compromising arc stability or increased spatter.
Check Stock

AWLOLWA 55PCS TIG Welding Torch Accessories Kit Collets Body Glass Cup Alumina Nozzle Stubby Gas Lens #10 Pyrex Cup Kit for TIG WP-17/18/26 (55-PCS)

  • Easy to assemble, You just push the transparent shield cup and make it installed firmly and seamlessly..
  • Made of copper material for the electrode clip.
  • Can be welded carbon steel and some low alloy steel.
Check Stock

TIG Welding Torch WP17FV Flexible 13 Feet Air Cooled with 10-25/35-50 Plug Valve 0.04 -1/8 Tungsten Electrodes TIG Welder Adapter for High Frequency/Lift TIG Welder

  • [Plug Size] WP17V flexible comes with quick fitting connector 10-25 and 35-50 plug(can be replaced as needed), air cooled with valve.
  • 0.02" to 3/32" tungsten electrode available.
  • [Flexible TIG Torch] Torch head can be adjusted to any angle as you want.
  • V-style torch knob to control gas on/off for quick and convenient control of shielding gas.
  • [Applicable Models] Can work with Reboot RBM-1300/RMB-1600/RBM-2100D/RBM-1550D as those welders support a LIFT TIG mode.Also the RBT-200PD/ACDC high frequency tig welder..
  • [How to use Lift Tig?] Connect to negative on the mig or stick welder with the quick fitting connector(correct your plug),blue cable for gas connection and leave the 2pins socket along,plug the ground clamp to positive.
  • [Standard Length] 13 Feet ,M16*1.5 & Two-pin socket,please check your tig welder before orders.
Check Stock

HITBOX MIG Welder 200A 110V/220V Dual Voltage Color Smart LCD Display IGBT Inverter Multifunction MIG MMA Lift TIG Stick Gas Mix Gases Gasless Flux Cored Wire Solid Core Wire Welding Machine MT2000Ⅱ

  • ...LIFT TIG FUNCTION - Can use 1.6mm and 2.4mm tungsten to weld 1- 6mm thickness. Can weld stainless steel. If you need to use lift tig function, a WP-17V tig torch will be needed. Please kindly note that WP-17V tig torch is not included in this package..
  • ★ MMA FUNCTION - Current 22 ~ 185 amp. Can weld 2.5/ 3.2/4.0mm electrode. It can weld 2-12mm thickness. It is super easy to strike an arc, little spatter, stable current, and good performance..
  • ★ 1 YEAR WARRANTY AND GREAT AFTER SELL SERVICE- HITBOX welder offers good warranty. If the machine can not work have other problem when working, please contact us at the first time, we can help you to fix it and we have agent in the United States, our agent will repair it for you. If finally we can not solve the problem, we will send you a new replacement..
Check Stock

TIG Welding Tungsten Electrodes 2% Thoriated Red Tig Tungsten Assorted, 5PCS 3/32'x 7' + 5PCS 1/16'

  • Premium 10 pack of assorted red WT20 2% thoriated tungsten electrodes for tig welding.
  • With reliable arc-striking and a low burn-off rate.
  • Electrode size: 3/32" x 7" or 2.4mm x 175mm AND 1/16" x 7" or 1.6mm x 175mm.
  • You get 5PCS 3/32"x 7" + 5PCS 1/16" 2% thoriated (Red) tungsten.
  • The tungsten rods can be very good operation even in high current range on DC.
Check Stock