Best Wpc Outside Flooring

CUTTEREX 13\ Free 360° Vinyl Laminate Floor Cutter for VCT, LVT, SPC, PVC, LVP, WPC, Rubber Floor and Rigid Core Vinyl Plank

• ✅CUTS WIDE RANGE OF FLOORS: Cuts up to 13" wide on VCT, LVT, PVC, LVP, WPC, Vinyl Plank Flooring, Max. 6mm Cutting Thickness, Adjustable Cutting Blade Height saves operator strength. Cutting Any Unapproved Flooring Materials will be Out of Warranty.
• ✅OUTSTANDING VALUE: Dust free, Quick, Quiet and Easy Operation. No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, NO Go Out and In House, NO Go Up and Down Staires, Time and Labor Saver..
• ✅CUTS MMOST SHAPES ON FLOOR: Cuts at Free 360° angles, Straight Cut, "L" Cut, "П" Cut and Lengthwise Cut..
• ✅STURDY STEEL AND ALUMINUM CONSTRUCTION: Plus Stop Fence and Angle Cutting Gauge..
• ✅COMPACT DESIGN AND LIGHT WEIGHT: Easy to Carry and Move around..

MANTISTOL 13

• Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring. Cutting unapproved materials will void warranty..
• No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time. If you received the cutter that cuts less than 8mm thick, please remove the blade, clean the aluminum shavings in the groove, and then assemble the blade correctly in the center of the blade bar..
• Why does the floor you cut crack? Because your floor must be Rigid Core Vinyl Plank SPC or RVP, it is a stone-plastic composite material, which contains stone powder.
• it is a brittle material. Floor cracks occur when at least two or more cuts are required to make long cuts and corner cuts..
• 13" cutting width and 8mm cutting depth. Straight cut, Angle cut.
• " L & " cut and Lengthwise cut(Solve the installation of wall and corner).Clearly marked measuring guide. 0-45 Angle Cutting, Translational cutting,the deep of the throat is 115mm/4.5inch.Easy to use and to carry around..
• 2.2mm thick tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade (installed flooring on about 5000 sq.ft ) Otherwise it will quickly end the service lifeman-made damage is not covered by th....

MantisTol 8.9

• Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring. You need to know that this can only cut vinyl plank, not laminate floor or wood floor!!!No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time..
• Why does the floor you cut crack? Because your floor must be Rigid Core Vinyl Plank SPC or RVP, it is a stone-plastic composite material, which contains stone powder.
• it is a brittle material. Floor cracks occur when at least two or more cuts are required to make long cuts and corner cuts..
• " L & " cut and Lengthwise cut (Solve the installation of wall and corner). Clearly marked measuide. 0-45 Angle Cutting, Cutting max.depth 8mm.Translational cutting,the deep of the throat is 115mm/4.5inch.Easy to use and to carry around, you will like it.
• 2.2mm thick 9 length tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade (did flooring on about 2000 square feet), Otherwise it will quickly end the service lifethis is a man-made damage and is not covered by the warranty! Or replace blade..
• Angle Cutting: 0 - 45 inch 160mm wide plank.

Slavic Spirits

• For Laminate, Multi-Floor, Bamboo flooring, Parquet, solid wood, Deck-Floor-Boards, fiber-cement siding, rubber cove base, LVT, VCT, SPC, LVP, WPC,....
• Sturdy high-quality steel and Heavy duty aluminum construction. 4 mm thick tungsten steel sharp blade, included a 600 Grit hone stone to keep sharp.....
• If you use it for business purposes, make sure you have a replacement blade. The general floor width is 8 inches, and only about half of the blade is....
• 37-1/4" Handle for increased leverage with less effort. No electricity, no dust, quick, quiet and Easy to use. Item Weight 18.7 lbs, DIY For Household....
• Blades are consumables. If the whole cutter is damaged due to improper operation, it will not be covered by the one-year warranty..

CalFlor FL49111CF FloorFix, Mix2Match Hardwood & Laminate Repair Kit

• Custom repairs for wood, laminate and wpc flooring, Countertops, cabinets, molding, and furniture.
• All-inclusive kit, includes tools and lacquer to complete your project.
• Use one of the 27 easy-to-follow Color formulas ranging from light to Dark wood tones and grays or create your own Color.
• Easy to mix, easy to apply, dries quickly, and customizable for creating marbling or graining.

Super Formula Hardwood Floor Cleaner Concentrate for Hardwood Flooring, Bamboo Flooring, Laminate Wood Flooring, Engineered Hardwood Floors, and Natural Wood Furniture, 1 Gallon - Sheiner’s

MantisTol LVP-231 8.9' Vinyl Plank Cutter ，for LVT/VCT/LVP/PVC/WPC/Rigid Core.

• Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring. Cutting unapproved materials will void warranty..
• No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor. The blade of our LVP-230 cutters can be moved. There are many complex scenes on the construction site that need special cutting (irregular corners，most of which are columns, door edges and wall corners). It can help you finish your work smoothly. Be sure to buy one of the good things and try it, not to mention the beautiful price, which will save you a lot of time to accompany your family！.
• Straight cut, Angle cut, Notch cut, Rip cut and more . Clearly marked measuring guide. 0-45° Angle Cutting, Cutting max.depth 8mm.Translational cutting,the deep of the throat is 115mm/4.5inch.Easy to use and to carry around, you will like it！.
• 2.2mm thick 9” length tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade (did flooring on about 2000 square feet), Otherwise it will quickly end the service life，this is a man-made damage and is not covered by the warranty! Or replace blade..
• If you received the cutter that cuts less than 8mm thick, please remove the blade, clean....

MantisTol 20-inch Pro Flooring Cutter MC-510,For Laminate Carpet tile Siding,Rigid Core Vinyl Plank and more；You are worth buying！

• For Laminate, fiber-cement siding,MDF, Rubber, Carpet tile, LVT, VCT, LVP, SPC, PVC, WPC tile & plank, Vinyl Flooring and more, up to 510mm (20”)....
• The max. cutting length: 510 mm (20 "), and max. cutting depth: 16 mm (5/8 ").Angle Cutting: 0-45,it will cut at 45 degrees on a 14 inch plank..
• A shear blade , included a 600 Grit oilstone to keep sharp..
• Straight cut and 45 degree angle cut. Clean and Straight cutting edg.（Fingers away from the sharp blade!）. No electricity, no dust, quick, quiet....

MantisTol 13 Heavy duty Vinyl floor cutter LC-330,For WPC,LVT,VCT and Rigid Core Vinyl Plank.

• Design for cutting LVP, WPC, LVT, VCT,PVC,SPC,Vinyl Plank Flooring. It can't cut Laminate,Engineered floor or other hard plank .So don't try to cut....
• No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time..
• " L & 凵" cut and Lengthwise cut(Solve the installation of wall and corner).Clearly marked measuring guide. 0-45° Angle....
• 3mm thick tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade....
• If you find that you need a lot of force during the cutting process, need to repair the sharpness of the blade. Replacement....

WORKPRO 13\ Laminate Floor Cutter, Vinyl Floor Cutter for Laminate, Multi-layer Flooring, Parquet, Fiber Cement Wall Panels, Rubber Concave Base, LVT, VCT, SPC, LVP, WPC and Vinyl Plank

• 【Multiple Cutting Materials】 This floor cutter can cut laminate floor, vinyl plank, multi-layer flooring, bamboo and wood panels, parquet, fiber cement wall panels, rubber concave base, LVT, VCT, SPC, LVP, WPC. Floor cutting up to 13” wide and 5/8” thick.
• 【Sturdy Aluminum and Sharp Tungsten Steel Blade】 ABS material cutting table and aluminum construction make the vinyl floor cutter strong and durable. With the sharp tungsten steel blade, it can cut faster and smoother.
• 【Safe and Extra Accessories】 A chain to keep you safe while not using the laminate floor cutter. The graduated scale with metric and imperial scale can meet your need for different cutting, and you can choose the angles of 22.5°, 30°, and 45°.
• 【Labor-saving and Comfortable Handle】 The telescopic rubber-covered handle allows you to use this lvp flooring cutter with less effort and a more comfortable grip.
• 【Easy to Move】 Floor cutter with wheels makes your cutting job easier, you can move it without much effort. The quiet operation of the wheels provides you with a pleasing atmosphere.

WORKPRO 13\ Floor Cutter With Safety Knee Pads

• Multiple Cutting Materials: This floor cutter can cut laminate floor, vinyl plank, multi-layer flooring, bamboo and wood panels, parquet, fiber cement wall panels, rubber concave base, LVT, VCT, SPC, LVP, WPC. Floor cutting up to 13” wide and 5/8” thick.
• Sturdy Aluminum and Sharp Tungsten Steel Blade: ABS material cutting table and aluminum construction make the vinyl floor cutter strong and durable. With the sharp tungsten steel blade, it can cut faster and smoother.
• Sturdy Pads: The heavy-duty and non-slip shields are big enough to cover your knees completely, which can protect against cuts or scrapes on any terrain faithfully.
• Ergonomic protection: The soft gel core and thick EVA foam padding cushion can provide extra knees support. The 600D polyester fabric with breathable mesh for all-day comfort even in summer.
• Reinforced Stitching: The excellent stitching process with nylon threads ensures long-lasting durability of shell, gel and foam. The durable knee pads can ensures long-lasting safety of knees.

WORKPRO Laminate Floor Cutter With Work Knee Pads

• Multiple Cutting Materials: This floor cutter can cut laminate floor, vinyl plank, multi-layer flooring, bamboo and wood panels, parquet, fiber cement wall panels, rubber concave base, LVT, VCT, SPC, LVP, WPC. Floor cutting up to 13” wide and 5/8” thick.
• Sturdy Aluminum and Sharp Tungsten Steel Blade: ABS material cutting table and aluminum construction make the vinyl floor cutter strong and durable. With the sharp tungsten steel blade, it can cut faster and smoother.
• Sturdy Pads: The heavy-duty and non-slip shields are big enough to cover your knees completely, which can protect against cuts or scrapes from the stone, nails, glass shards faithfully.
• Ergonomic protection: The soft gel core and thick EVA foam padding cushion can provide extra knees support. Helps reduce knee pressure from heavy work on hard floor or concrete.
• Reinforced Stitching: The excellent stitching process with nylon threads ensures long-lasting durability of shell, gel and foam. The durable knee pads can ensures long-lasting safety of knees.

400SQFT AMERIQUE 4TH Generation High-Density Luxury Gold 2.5MM Thick EVA Foam Flooring Underlayment Padding with Tape & Vapor Barrier, Elasticized Closed-Cell Technology (Model: 691322312041)

• 4th Generation High-Density Luxury Gold 2. 5MM Thick EVA Foam Flooring Underlayment Padding.
• Elasticized closed-cell technology creates rubber-like softness and flexibility.
• High-density Premium EVA foam provides excellent support and cushion.
• 3-In-1 Heavy Duty with Tape & Vapor Barrier, Extreme Sound Reduction & Moisture Protection.
• With perfect glossy appearance, resistant to UV radiation and cracking.
• Ideal for Wood, Bamboo, WPC, SPC, Vinyl, Laminate and Any Floating or Engineered Floors.