Categories

Best Wrought Iron Furnitures

Minuteman International, Clover woodstove Tabletop Wrought Iron Trivet, Black

  • Made of Forged Wrought Iron - Oval-shaped, measuring 10-in L x 7-in W x 3/4-in H.
  • Black Powder coated Finish that is more resilient than liquid paint. The wrought iron has the look and feel of natural wrought iron, but is sealed with a hard finish that won’t chip or corrode easily..
  • On the Woodstove- Protect wood stove finish from scratches and diffuse heat beneath a steamer, kettle or Dutch oven..
  • For Tabletop or Counter- Decorative and functional, these trivets are ideal for placing beneath a hot dish on the counter or table when cooking, and make hotplates attractive enough for the dining table or buffet..
  • Traditional Clover Design- Tapering wrought iron curls join at a center medallion. Add a bit classic European craftsmanship to your kitchen, living or dining room décor..
Check Stock

Kirsch Wrought Iron Double Drapery Bracket Rust

  • Size: 7 1/2 inches in length, 5/8 inches in width, 5 9/16 inches in height, 3 1/2 inch inside projection, 6 1/2 inch outside projection..
  • Availability: Kirsch Wrought Iron, if in stock, typically ship in 1 - 2 business days..
  • Returns/Exchanges: Non-Customized Kirsch Wrought Iron drapery hardware is returnable.
Check Stock

Warmaxx Black Metal Furniture Table Legs 30 inch Height Wrought Iron Console Table Leg Industrial Sturdy Table Legs for Coffee Computer Dinning Table Modern Side Table Legs 2 Pcs with Screws

  • 【Packing included】: 2 pieces of 30 inch Height legs, enough screws. If you want to attach to thinner panel, it is suggested to buy some shorter screws..
  • 【No wobble】: 100% straight and stable. Very sturdy and thick metal..
  • 【Ultra-sturdy metal legs】: This table leg is real metal and can definitely handle a heavy duty load. They are made from sturdy wrought iron in a matte black finish,through careful sanding and painting. Very stable and sleek looking..
  • 【Super easy to install】: Easy to install, each of the product has mounting plate with pre-drilled holes..
  • 【Widely Used】:This metal furniture table legs are great ideal for live edge slab tables, bar table legs, coffee tables, side tables, DIY desks, end tables, computer tables, office tables, benches and any furnitures..
Check Stock

Wrought Iron Patio Furniture Legs Caps, 1-1/2

  • 【SIZE】: Our wrought iron chair glides have a diameter of 1.5” and are designed to fit most pieces of common metal patio furniture. Please check whether your wrought iron chair legs have remnants of old feet stuck in them before installation, if yes you can simply with a screwdriver to remove them, to ensure proper fit. (Please measure the inner diameter of the chair leg caps where the furniture glide will be installed before ordering).
  • If you are not satisfied with the furniture glides or have any issues, you could contact Portagen anytime. And you will get a satisfactory answer and solution within 24 hours..
  • 【 SAY GOODBYE TO NASTY SCRATCHES AND RUST】These outdoor chair leg floor protectors not only prevent your patio floors or deck from scratched or rusted but also help the chairs and tables slide with ease.Our wrought iron furniture glides are made with UV resistant plastic that will provide years of use and endure whatever weather may come.
  • 【TIPS FOR EASY INSTALLATION】：A rubber hammer or mallet is recommended for installation. It is helpful to putting this replacement leg end caps in hot water for about 1 minute or you can heat them with heat gun to soften them, then you will find it’s easier to make the glides inserted wit....
Check Stock

SJYDQ Bar Stool-The Urban Port Antique Colonial Attractive Wooden with Iron Legs ( Size : 45cmx75cm )

  • ★Ergonomically designed with workmanship, these barstools not only look great but are also incredibly comfortable..
  • ★It is perfect for your kitchen, party room, lounge area, cafe bar or office use..
  • ★Solid wood seat cushions are made of imported solid wood, with clear texture and formaldehyde-free -friendly spray paint, waterproof, -proof and high-temperature resistant..
  • ★The selected wrought iron chair legs are made of high-purity original iron, which is made of high-pressure, retro-old, comfortable, and resistant to corrosion and wear..
  • ★The wrought iron foot iron frame is made of solid high temperature forging into other shapes of iron, the cast iron is easy to break, the wrought iron is not easy to break, and the wear resistance and shock absorption are good..
Check Stock

Achla Designs 120-0050 Round Trivet Plant Stand, Graphite Powdercoat Finish

  • Small decorative plant stands made with a traditional ironworking techniques to complement home or garden décor.
  • Traditional wrought-iron trivet-style scrollwork ideal for use as a small accent table, yet sturdy enough to elevate a large planter.
  • Made of wrought iron with a Graphite powder coated finish, giving them the natural look of wrought iron, with a durability and weather-resistance.
  • Indoors, use these stands to raise planters off the floor, outdoors for dressing up a patio, porch and garden area.
  • Measures 14-in H with 12-in diameter top.
Check Stock

1.5\ Patio Furniture Glides - 36 Pack Wrought Iron Chair Table Legs Feet Caps Outdoor Floor Protectors Replacement Parts for Protect Your Floor Surfaces from Scratches and Rust Easy to Install (Black)

  • ☛【Fits Chair Feet with 1-1/2" ID】 You will receive 36 pcs patio floor protectors for wrought iron furniture legs. The quantity of 36 pieces is enough to replace the aging chair leg protectors of 9 chairs. This sliders for chairs has a 1.7" outer diameter (1.4" inner diameter). Perfect for a variety of wrought iron chairs or table legs with an internal diameter of 1.5"..
  • ☛【Durable Material】Our outdoor wrought iron chair leg protection glides are made of thicker, more durable high-quality plastic that lasts longer. They're strong enough to withstand the heat and sun in summer, and the cold in winter, to work for you in any weather, and you won't have to worry about them warping or rusting..
  • ☛【Protect Patio Floors】 Our wrought iron furniture feet caps have a smooth surface and rounded shape. They are great for protecting your patio floors from scratches or rust from wrought iron furniture legs. The chair and floor can be well protected..
  • ☛【So Easy to Install】 Soak in hot water for a few minutes before installation, this makes installation easier. 1. Use a screwdriver or pliers to remove the old sliders for wrought iron chairs. 2. Use a knife to remove dirt and other residues from the inside of the chair legs. 3. Fix the chair g....
Check Stock

32 Pack of 1.5” Patio Furniture Glides/Feet/Caps for Wrought Iron Outdoor Furniture – Protect Your Floor Surfaces from Scratches, Replacement for Eight Chairs (with 4 Legs), Easy to Install Impresa

  • Easy To Install: Our wrought iron chair glides have a diameter of 1.5” and are designed to fit most pieces of common patio furniture. They are easily installed using a rubber hammer or mallet. No adhesives required..
  • Keeps Floors Protected: These wrought iron chair glides help to provide the much-needed cushion to protect your floors from permanent damage. Say goodbye to nasty scratches on your patio floors. These chair glides help to prevent moisture build-up that may cause rust on your wrought iron tables or chairs..
  • Excellent Value: Our 32 pack of patio chair glides is enough for 8 chairs (with 4 legs each). These durable leg cushions are designed to last for seasons to come..
  • Will it Fit? These are not adjustable and are not a universal fit. Designed with weep holes to fit inside the chair leg of most standard sized patio chairs and stools that require a 1.5 inch in diameter cap. Please measure the diameter of the wrought iron cup area where the glide will be installed (see infographic in images). Please reach out to us through our seller page with any questions..
  • Made To Last: Our wrought iron furniture glides are made with UV resistant outdoor-ready plastic and designed to endure whatever weather may come. Spend less time replacing your chai....
Check Stock

Infinity Instruments 20068AG-4420 Rustic Farmhouse Decorative 20 x 9 Inch Quartz Battery Powered Pendulum Wall Clock, Antique Black

  • RUSTIC FARMHOUSE WALL CLOCK: Decorative, sophisticated, and functional pendulum wall clock that features rustic farmhouse styling in an elegant way.
  • SIZE: Measures 20 inches tall and 9 inches wide.
  • WROUGHT IRON DESIGN: Plastic wall clock boasts a weathered wrought iron design with gold-color pendulum.
  • ANTIQUED APPEARANCE: Wrought iron inspired metal clock hands, weathered antique-style clock face, and black Arabic numbers.
  • BATTERY POWERED: Requires (2) AA battery (not included).
Check Stock

Gifts & Decor Metal Rooster Wrought Iron Outdoor Garden Yard Statue

  • Impressive sculpture made from cast iron and wrought iron.
  • Intricate artistic detailing with an antique handicraft look.
  • Adds a touch to sophistication to any decor.
  • Measures 15 inches x 6 inches x 31 inches high.
Check Stock

Warmaxx Z Type Iron Furniture Table Legs 32 inch H Heavy Duty Black Metal Legs Industrial Square Tube Sturdy Legs for Entry Side Table Computer Dinning Table 14 W Office Desk legs 2 Pcs with Screws

  • [Dimension]: Width 14" x Height 32" x Deep 2"..
  • [Ultra-sturdy metal legs]: This table leg is real metal and can definitely handle a heavy duty load. They are made from sturdy wrought iron in a matte black finish,through careful sanding and painting. Very stable and sleek looking..
  • [Super easy to install]: Each of the product has mounting plate with pre-drilled holes. The mounting plate is wide and the strew holes are clear and aligned..
  • [Widely Used]: This Z type metal furniture table legs are great ideal for live edge slab tables, coffee tables, side tables, DIY desks, end tables, computer tables, office tables, benches and any furnitures..
  • [No wobble]: 100% straight and stable. Very sturdy and thick metal. There are six flat gasket in the package, you can use it as you need..
Check Stock

Warmaxx Heavy Duty Metal Furniture Table Legs H Type Black DIY Iron Legs 32 inch Height Industrial Square Tube Sturdy Legs for Bench Coffee Computer Dinning Table Office Desk Legs 2 Pcs with Screws

  • [Ultra-sturdy metal legs]: This table leg is real metal and can definitely handle a heavy duty load. They are made from sturdy wrought iron in a matte black finish,through careful sanding and painting. Very stable and sleek looking..
  • [Dimension&Weight]: Width 12" x Height 32" x Deep 2.4". And the weight of the table leg is 15.4lb..
  • [Super easy to install]: Each of the product has mounting plate with pre-drilled holes. The mounting plate is wide and the strew holes are clear and aligned..
  • [No wobble]: 100% straight and stable. Very sturdy and thick metal. There are six flat gasket in the package, you can use it as you need..
  • [Widely Used]: This H type metal furniture table legs are great ideal for live edge slab tables, coffee tables, side tables, DIY desks, end tables, computer tables, office tables, benches and any furnitures..
Check Stock

Achla Designs FB-63 Plant Stand, Black

  • INDOOR OUTDOOR SOLARIA COLLECTION- Made for container gardens on decks balconies and patios, or houseplants and tropicals in living rooms and sunrooms. Our stylish and functional Solaria Planter collection combines architectural wrought iron stands and hangers with warm terra cotta finish containers..
  • FOR TABLETOP OR FLOOR- Ideal for windowsill, tabletop or kitchen counter, the Florence Planter can easily support a planter, bowl or vase to display a seasonal flowering accent, culinary herbs, orchid or low-light office pothos..
  • WROUGHT IRON STAND- The simple Florence Planter is a folding three-legged stand with a modern style. Made of wrought iron with a black powder coated finish for maximum weather resistance..
  • USE WITH ANY PLANTER- For your favorite plant, choose a pot with a base up to 8" diameter.
  • MINIMALIST DESIGN- Simple and practical, this stand is folding, with a slim linear profile. Measures 10" W x 9"D x 9"H ..
Check Stock