Categories

Best Ws2812b Connector Pin

BTF-LIGHTING WS2812B WS2811 2.4G WiFi Music SP511E SPI Controller Google Home/Alexa Timer Mode with Dual Signal Output 900pixels/port for LED Module Pixel Strip Light APP/3Key Button/IR Remote Control

  • ...favorite effect from dynamic . Mark 4 kinds of favorite effect form static . You also can switch freely between dynamic mode and static mode..
  • 5.5mmx2.1mm DC power jack .Support WS2812B ECO,UCS1903 ,SM16703,WS2811,WS2812B,6803 etc all the single data smart IC chip. Can not support SK6812RGBW 4 channels IC .3PIN Male Connector.
  • Drive 900 pixles/Port. This controller control 900 pixels/port max . The APP is Fairy Nest. This controller only support 2.4G WiFi network.Can't support 5.0G WiFi network. Only support 2.4GHz WiFi.If the WiFi is 2.4G/5.0G, please set the router to be divided into two WiFi, one is 5.0GHz and the other is 2.4GHz.
  • DC5V LED strip,Must use 5V power supply.For example LED strip is DC5V WS2812B , you must use DC5V power supply . The voltage depends on LED strips. Don't use DC12V power supply for DC5V WS2812B pixel strip..
  • Color calibration. When the app color is inconsistent with the color of the LED strip, where green is blue and blue is green You can use the APP to calibrate the colors to make them consistent..
  • Insufficient power supply will cause the controller to lose control, the color of the LED strip is frozen, remote cannot be used, and the WiFi is disconnected . Please note : When you Light up 1 colorred or green or blue or p....
Check Stock

Vilros Getting Started with MicroPython on Raspberry Pi Pico Kit

  • Vilros Getting Started With MicroPython on Raspberry Pi Pico Kit.
  • LEARN TO PROGRAM: 48 Page Full Color Guide features clear instructions with screenshots and covers: Getting to know your Pico, Programming with MicroPython, Physical computing, More Pico projects--Also Includes a Pin Reference Card for easy Pico Wiring.
  • CUSTOM PICO PARTS: Includes Battery Holder with Micro USB connector to power on the go, USB Cable to connect to a PC and program and a Panel to neatly hold the breadboard and battery holder for a neat and easy wiring experience.
  • STORE AND CARRY: Includes a Picoboat case to protect your pico when not in use and also includes a neoprene bag to store all the parts of the kit neatly.
  • HIGH QUALITY COMPONENTS: Includes 30 × Jumper wire variety --1 × Full Size (800 Hole) Solderless breadboard--12 × Assorted Color LEDs: ---5 × Push-button switches--10 × 330 Ω resistors--1 × Active piezoelectric buzzer--2 × 10 kΩ potentiometer--1 × HC-SR501 PIR sensor--1 × I2C 1602 LCD module--1 × WS2812B LED strip-- All Packed in a Clear hard plastic box for small part storage.
Check Stock

ALITOVE 5V 10A Power Supply Adapter AC/DC Converter 100-240V AC to DC 5 Volt 50W 10Amp 9A 8A 7A 2A Transformer with 5.5x2.5mm Plug for WS2812B WS2813 WS2811 W2813 SK6812 LED Strip Pixel String Light

  • Works with device that draws less than 10A, such as 9.5A, 9A, 8.5A, 8A, 7.5A, 7A, 6A, 5A, 4A, 3A, 2A, 1A..
  • DC plug connector external diameter is 5.5mm, internal diameter is 2.1~2.5mm. Comes with a female DC barrel connector. You can easily screw wires on it without soldering..
  • Safety protection: automatically overload cut-off, over voltage cut-off, over temperature cut-off, short-circuit cut-off..
  • Sufficient 50W output power and stable 5V output voltage will protect your electronic devices from destruction..
  • It is perfect for 5V devices less than 50W, such as WS2812B WS2811 WS2813 WS2801 APA102 SK6812 LED Strip Pixel light, CCTV security camera, Bluetooth speaker, cooling fan..
Check Stock

IBERLS 5V 2A DC Power Supply Adapter for Nextbook, Tablets, Baby Monitor, TV Box, Camera, Scanner, LED Pixel Light, Webcam, Guitar Receiver, Speaker and More 5V Devices Charger Cord

  • Intelligently Ldentify: Output: 5V Max 2A/2000mA, it means that it can supply with all amperage which smaller than 2A. ---such as 1.5A, 1A, 600mA, 750mA, 800mA, 900mA all is available..
  •  More Selective: Comes with connector: 5.5*2.1mm Polarity: positive (+) center, In order to meet your more requirements, we have configured 10 connectors for you，connector: Micro-USB, Type-C , Mini USB, 2.5*07mm, 3.0*11mm, 3.5*1.35mm, 4.0*1.7mm, 4.0*1.35mm, 4.8*1.7mm, 5.5*2.5mm, ⚠️Due to different production batches, gift connector may be slightly different from the above connector, Specifications are subject to the phisycal product..
  • Applicable Products: For Tablets, CCTV Camera, WS2812B WS2811 WS2801 SK6812 LED pixel light, Diffuser Umidifier, Mini fan, Scanner, Router, Star Shower, Kindle Fire Tablet, IP Security Camera, Baby Monitor, Home Phone System, VoIP Telephone Routers, Serato DJ Controller, DVR, Cartoon Watches, Mobile phone, Power Bank, VoIP Phone Router, MP3/MP4, Webcam Router, Toy, Recorder, Bluetooth Speaker, Hard Disk Boxand more compatible 5V devices. (5V ONLY).
  • Exquisite Shell: Reminder light, it is easy to find it in the dark，Size: The actual goods are more exquisite than the picture, Wire length: 1.5m approximately 5 Ft, Wires longe....
Check Stock

Ziihao WS2812B Panel,8x8 64 Pixels Matrix Flexible Individually Addressable,Led programmable Soft Screen DC5V Low Voltage RGB Flexible Point Light Source Display,Full Color Works with K-1000C(2PCS)

  • 2PCS WS2812B Panel: 8x8 led matrix,WS2812B LED Panle digital flexible light. Width :8cm (3.15in) Length:8cm(3.15in)Work voltage: DC 5V. Full color, high brightness, good heat dissipation, long working life, up to 50,000 hours..
  • Smart device: Each LED controled by integrated circuit, which is individually addressable. You can set each LED as you wish to scroll messages or draw little images.With different controllers, it has different effects, spectrum music mode, rolling subtitle, picture display, video display, fireworks effect and chase effect..
  • Compatibility & Application: The led pixels work with Arduino, Raspberry Pi, FastLED library, Rainbowduino, SP103E, SP105E, K1000C,T1000S, etc. Widely used to make led screen, led wall, advertising board and widely applied to hotel, KTV, bars, Outdoor advertising signs, Christmas or wedding party decoration,can stick it to the wall or other items conveniently as you like..
  • Chainable and bendable design. : You can extend the ws2812b panel by hooking them up one by one with the 3pin JST connectors. Flexible FPCB can be gently bent and curved around surfaces,can be spliced into a large pixel screen..
  • Economical and practical:Cost-effective. Alloy wire is not as expensive as pure gold wire,reduce cost of use.Great ....
Check Stock

WS2812B RGB LED Strip Light 30 Pixels/M Digital Programmable, Aclorol WS2812B Individually Addressable 16.4ft 150 5050 RGB SMD Pixels Dream Color Black PCB 5V Work with Arduino & Raspberry Pi

  • INDIVIDUALLY ADDRESSABLE. You can control each LED individually! Yes, that’s right.
  • this is the digitally-addressable type of LED strip. You can set the color of each LED’s red, green and blue component with 8-bit PWM precision (so 24-bit color per pixel). WS2812B Led strips are work great with Arduino, FastLED library, Adafruit NeoPixel Library and Raspberry Pi..
  • FULL COLORFUL: 256 brightness display and full 24-bit color display. Each 5050 SMD w/ WS2811 build in can have its own color and brightness. You can control each LED Pixel individually and set it to any color or animation you want.
  • CUTTABLE&CONNECTABLE: This WS2812B Pixel can be cut off without damaging the rest pixels. Each LED strip comes with 3pin JST-SM connectors and can be connected end to end, Maxim base on you controller. So you can DIY for length you want..
  • HOW TO GET IT WORK: First, you will need an output is 5V power supply and controller (Both don’t include). Second, Connect Power and Ground from Power Supply. AND Connect Ground and Control (data) wire to whatever you are driving the string with – Arduino, ESP8266 or any controller..
  • SAFETY & EASY INSTALLATION. Work under DC6V, low voltage for human safety, low power consumption, energy-saving, supe....
Check Stock

CHINLY 93 LEDs 6 Ring WS2812B WS2812 5050 RGB LED Ring Lamp Light Individually Addressable Full Dream Color DC5V

  • 93 Leds WS2812B 6 Ring Lamp Light with Integrated Dri,6 rings can either work together or separately..
  • The interface of 5V+, GND and DI of each ring is soldered in the factory. Easy using..
  • Wide compatibility,It works great with Arduino, Raspberry Pi, FastLED library, Rainbowduino, SP103E, SP105E, K1000C,T1000S, etc..
Check Stock

5V 15A 75W Power Supply 100V-240V or 110V - 220V AC to DC Adapter 5V 15 amp Switching Converter 5.5x2.1mm Plug for WS2811 WS2812B WS2813 2801 LED Strip Pixel Lights

  • This 5V 15A Power Supply comes with a female DC connector for screwing wires onto it. You can easily connect wires on it without soldering.
  • Safety features: Automatic overload cut-off, over Voltage cut-off, automatic thermal cut-off, short circuit protection.
  • Input: 100V-240V50/60Hz or 110V - 120V 50/60Hz.
  • Enough 75W output power and 5V stable output voltage will protect your electronic products from destruction.
  • It is perfect for all 5V projects, such as WS2811 2801 WS2812B WS2813 LED Strip Pixel light, CCTV Camera, Security System, Computer Project, etc..
Check Stock

SHNITPWR 5V 8A 40W Power Supply Adapter AC/DC Converter 100V~240V AC to DC 5 Volts 8 Amps Transformer with 5.5x2.5mm DC Tip for WS2812B WS2813 LED Pixel Strip TV Box USB HUB Raspberry Pi Arduino

  • It means that it can supply with all amperage less than 8A. ---such as 500mA, 1A,....
  • Output DC adaptor jack size is 5.5mm x 2.5mm. In order to meet your more requirements,we give away a female DC connector. You can screw wires onto it....
  • Certified by FCC CE ROHS. We focus on producing high quality power adapters. No noise, low temperature operation, no spontaneous combustion, no....
  • Compatible: WS2812B WS2811 WS2801 APA102 SK6812 WS2813 LED Strip Pixel light/ USB-HUB / Graco Swing / Mobile phone/ Home Phone System / VoIP Phone....
  • If you don't like our product or don't want it, please feel free to contact us. We will happily accept the return and give you refund, we have 30 days....
Check Stock

ALITOVE WS2812B LED Strip, 5mm Width Super Narrow RGB Addressable LED Light Strip 6.6ft 120 LEDs Programmable Dream Color Digital LED Pixel Rope Light 5V for Home Theater Bedroom Bar Decor Lighting

  • 【Super Narrow Design】 We especially design the 5mm-width extreme narrow WS2812b LED strip to satisfy some special projects requirements. Half the width of conventional strips makes it much easier to hide or install in narrow groove. This greatly expands its application scope..
  • 【Individually addressable LED】WS2812B RGB 5050 LED. Each pixel can have its own color and brightness. You can control them individually and set them to any color or animation you want. 256 gray levels adjustable and 16777216 color full color display..
  • Compatible with Arduino, Raspberry Pi, Teensy, T1000S,K1000C etc programmable controllers. Support SP105E SP108E SP110E app controllers, SP106E SP107E music controllers, SP501E and MHCTRWF5V smart WiFi Controllers. (Controller and power supply is not included. ).
  • 【Great for DIY】 Each LED can be cut freely along the cutting line. self-adhesive tape makes it easy to install. Flexible design, you can bend it to any shape you want. 3pin JST-SM connectors and separate power/ground wires on both ends for easy hooking up and injecting power in case of voltage drop..
  • 【Wide Application】 It can be used to make TV or monitor backlight, under cabinet light, under bed light, night light and led screen, led wall, advertising board a....
Check Stock

ALITOVE WS2812B WS2811 Addressable LED Bluetooth Controller iOS Android App Wireless Remote Control DC 5V~12V for SK6812 SK6812-RGBW WS2812 SM16703 Dream Color Programmable RGB LED Strip Pixel

  • ...mote Control.】IOS and Android App remote control via Bluetooth.
  • IOS 10.0 or Android 4.4 or later edition required. 20m Long distance remote control.
  • convenient to use. Your smart Phone should support Bluetooth 4.0 or later version..
  • 【Wide Compatibility】 Support almost all the LED driver ICs, such as WS2811,WS2812B, SK6812, SK6812-RGBW. But there is no WS2812B option on the setting page, please choose WS2811 when connect it to WS2812B LEDs..
  • 【Rich color modes】Come with 120 kinds of dynamaic color change modes, tons of static color, which are vivid and beautiful. Color hue, brightness and speed are adjustable. When you connect SK6812-RGBW LED Strip, the white channel can be adjusted individually..
  • 【User-friendly design】Support setting IC types, R/G/B sequence and pixels number, control up to 1024 pixels in total. Save user setting when power off. DC 5V~12V wide working voltage.
  • 【Warnings】The controller can’t regulate the output voltage at the VCC. That means the output voltage of your power supply must be the same as the work voltage of your led lights. If your lights need 5V input, please use a 5V power supply, never use 12V power supply. Otherwise, your lighes will be damaged..
Check Stock

WESIRI 93 LEDs 6 Rings WS2812B 5050 RGB LED Ring Lamp Light Individually Addressable Full Dream Color DC5V with Mini Controller

  • 93 Leds WS2812B 6 Ring Lamp Light with Integrated Dri,6 rings can either work together or separately..
  • The interface of 5V+, GND and DI of each ring is soldered in the factory. Easy using..
  • It comes with a mini controller. The controller comes with 76 kinds of patterns. Even if you don't know how to program, you can also make this LED Ring light vivid and beautiful..
  • Wide compatibility. It works great with programmable controller, SP103E, SP105E, K1000C,T1000S, etc..
Check Stock

WESIRI 241 LEDs 9 Rings WS2812B 5050 RGB LED Ring Lamp Light Individually Addressable Full Dream Color DC5V with Mini Controller

  • 241 LEDs WS2812B 9 Ring Lamp Light with Integrated Dri, 9 rings can either work together or separately..
  • The interface of 5V+, GND and DI of each ring is soldered in the factory. Easy using..
  • It comes with a mini controller. The controller comes with 76 kinds of patterns. Even if you don't know how to program, you can also make this LED Ring light vivid and beautiful..
  • Wide compatibility. It works great with programmable controller, SP103E, SP105E, K1000C,T1000S, etc..
Check Stock