Categories

Best Xtc Power Products For Honda Talon

RZR Horn Kit For UTV 12V Horn With Button Rocker Switch Compatible with Polaris RZR XP 1000, Ranger, Honda Pioneer Talon, Can Am Maverick X3, Yamaha Rhino, Arctic Cat Wildcat, Teryx 4

  • Compatible With: This Universal UTV Horn Kit is a direct replacement for Many UTV vehicles. This includes Polaris Ranger, RZR, General, Ranger.
  • Can Am Maverick, Commander Max, Defender, Outlander.
  • Bass Speaker: 60B LOW 410HZ, Operates on standard 12 volt DC, Support short press and long press. Widely applicable to many occasions.
  • Package Includes: horn, plug, interface, fuse, switch..
  • Horn Feature: The horn switch has two built-in LED working lights, one of which is always on after installation, for better identification at night..
  • Installation Instruction: Easy to install, Plug and play. Just pass the wire harness through the switch hole and through the firewall, you can connect 3 12v + keyed ignition, 12v + constant, 12v-negative (grounded) power cords, and then connect the remaining 2 speaker wires..
Check Stock

VHT SP118 FlameProof Coating Flat White Primer Can - 11 oz. by VHT

  • XTC Silicone Zinc Primer prevents corrosion of metal surfaces exposed to high heat, high humidity, condensation and salt air.
  • XTC Silicone Zinc Primer functions much like galvanizing as it locks itself to bare metal surfaces leaving a perfect primed surface for top coating.
  • XTC Silicone Zinc Primer can be used alone as a finish paint.
  • XTC Primer withstands temps in excess of 1200 Degree F (648 Degree C).
  • XTC Silicone Zinc Primer is Gray in color.
Check Stock

Custom Dynamics License Plate Mount/Relocation Black CD-TLLP-KIT-B

  • Fits all Honda Talon models. Attaches to rear muffler protector (OEM 18312-HL6-A00) using the OEM bolts..
  • 4 #8-32 X ½” Phillips Screws Included.
  • No drilling required to add license plate..
Check Stock

Swagman XTC2 FAT BIKE Wheel Tray

  • EASY TO ASSEMBLE: By following the easy step by step instructions provided, easily install by securing to your crank arm using convenient hand knobs. No tools or extra hardware required..
  • VERSATILE: This bike wheel holder makes it easy for you to carry 1 Fat Bike on your Swagman XTC2, XTC2 TILT or XTC4 platform style bike rack. It will also work on Swagman XC2 and Swagman Traveler XC2..
  • WORRY FREE SECURITY: No need to worry about your fat tire shifting around or have to use excessive bungee cords on your fat bike racks. The wheel holder comes with great quality extra long rubber straps that firmly secure fat bike wheels to the holder..
  • SAFETY IN USE: The fat bike rack adapter has an upturned loop which prevents it from accidentally rolling off during loading..
  • AFFORDABLE UPGRADE: For just a little extra, easily upgrade your existing Swagman fat tire wheel holder or a lower end bike rack adapter..
Check Stock

Set of 2 Dragonfire Racing 4-Point Harness 3 H-Style Harness W Sternum Clip 3 Black For 2019 + Honda Talon

  • H-style harness restraint with extended sewn-in shoulder pads with memory foam.Integrated and adjustable sternum clip, keeps shoulder straps in....
  • The DragonFire 3" UTV Harness are a must have for any serious rider..
  • Set of 2 for 2019 Honda Talon fits perfect through your stock seat pass through's bolt on and go.
Check Stock

OCPTY Sintered Brake Pads Fit for 2014-2019 for Polaris RZR XP 1000 EPS, 2014 for Polaris RZR XP 4 1000, 2013 for Polaris RZR XP 4 900 Front and Rear

  • Compatible with Models: 2016 2017 2018 2019 2020 2021 Honda Pioneer 1000, Pioneer 1000-5 | 2019 2020 2021 Talon 1000R 1000X.
  • Material: Brake Pads are made of high quality sintered metal, Brake safety is certified by ECE R 90 and tested by TUV. Ultra-high friction HH grade brake pads have braking performance unbeatable by similar products in the market..
  • Replace Part Number: Front LEFT kit - 06451-HL4-A01, Front RIGHT kit - 06452-HL4-A01, Rear LEFT kit - 06431-HL4-A01, Rear RIGHT kit - 06432-HL4-A01.
  • Easy Installation: We have tested so many times before sales. Brake Pads are easy to install with simple hand tools in just minutes - no special tools required for installation..
  • Warranty: For any reason, if you are not satisfied with your purchase, please contact us directly. We offer a six-month warranty, 100% satisfaction guarantee..
Check Stock

SOFO GX160 Ignition Coil Module - GCV160 Ignition fits Predator 212 Spark Plug Pack, Honda GX200 Engine, Parts For Honda GX160 Predator Coil Replacement for Champion 196CC Coleman CT200U 5.5/6.5HP

  • Fit for Honda 5.5 HP 6.5HP Engines including GX110, GX120, GX140, GX160, GX200 Gas Engines.
  • Fit for Honda 159CC 196CC 208CC 212CC 224CC Lawn Mower/Engine/Generator/Pump/Snow Blower/Pressure Washer.
  • Fit for Champion Power Equipment 196CC 6.5HP 3500/4000 Watts Gasoline Generator.
  • Fit for Predator 212CC Engine and Predator 3500 Watts Ignition Module. For 3500/4000W Engine Generator..
  • Fit for Honda part number:30500-ZE7-023, 30500-ZE7-033,30500-ZE7-043, 30500-ZE7-063,30500-ZE1-023, 30500-ZE1-03330500-ZE1-043, 30500-ZE1-053,30500-ZE1-063, 30500-ZE1-073,30500-ZG9-801.
  • For Coleman CT200U, BT200X, KT196 Powersports. For Honda 8 hp engine, Nikota 3500 parts, replacement coil..
  • Compatible with Harbor Freight Predator 212CC 6.5HP Go Kart OHV Engine.
  • Compatible with Baja Warrior Heat MB165 MB200 163CC 196CC 6.5HP Mini Bike. For gx270 honda engine, honda 8 hp engine..
  • Package includes 1 Ignition Coil, 1 Spark Plug, and 1 On/Off Switch. These products are brand new and high quality. Well-packaged products will be directly shipped from our warehouse in the USA..
  • 30-day return policy applies to all SOFO products..
Check Stock

Power Steering Pump Rubber Inlet & Outlet O-Ring Seal Set Compatible with Honda Accord Civic 91345-RDA-A01 91370-SV4-000

  • Compatible with Fit for many Acura & Honda vehicles.
  • Part number: 91345-RDA-A01 O-ring fits between the inlet nipple and the pump body, 91370-SV4-000 O-ring located between the pump outlet and the pressure hose inlet.
  • If you have a Honda that has a power steering whine upon cold start and goes away as car warms up this part is for you.Solve the problem that the original o-rings lost sealing ability and cause fluid leaks because it became flat and hardened as time goes by and due to extreme cold weather.
  • Easy plug and play: Exact replacement for OEM power steering pump (intake side) on Honda Civic and definitely solved the air entrainment issue which was causing the pump to whine/squeal excessively..
  • 20 Year Warranty: Superior Honda Accord Civic Power Steering Pump O-Ring is committed to better serving our clients through quality products, excellent service and great value. If you have any questions, please feel free to contact us..
Check Stock

Full Electrics Wiring Harness Coil Ignition Switch CDI Solenoid Relay Spark Plug For 4 wheelers Stroke ATV 150cc 200cc 250cc Quad Bike Buggy Go Kart By OTOHANS AUTOMOTIVE

  • ❃Compatible models: Our High Quality Motorcycle Wiring Harness Assy Fits for Honda TRX400EX 1999.
  • ❃Comply with Quality Standards: Our Wire Harness For Honda TRX400EX has undergone strict quality testing before shipment. All are manufactured in accordance with the original factory quality, the size is absolute standard, and can be replaced directly..
  • ❃High Reliability and Performance: This high-quality wire set is made of ABS material, high-quality copper wire, plug, heat shrinkable tube, threaded tube and outer wrap protection insulation. It can quickly transmit and power, and is not easy to deform after long-term use. It can withstand high Low temperature..
  • ❃Tips: Please carefully confirm your model and whether it is within the scope of application before purchasing, please refer to the applicable type and OEM number on the page..
  • ❃After-Sales Service: If you have any questions about our products during the use and purchase process, you can contact us by email at any time, we will try our best to solve the problem for you, and we will provide comprehensive quality assurance for our products..
Check Stock

AHL Front & Rear Brake Pads Set for Honda VTX1300 S Retro/C/R/T 2003-2013 / VTX1300 VTX 1300 C / R / S Retro 2003-2006 / VT1300 CXA Fury (Non ABS Model) 2010-2015 (Semi-metallic)

  • Compatible with:1996 Honda VRX400 T (NC33) ,Honda CBF500 CBF 500 4 (Non ABS Model) 2004, Honda VT1100 C2 Shadow American Classic Ed 1995-1999, Honda VT1100 C2 Shadow Sabre 2000-2007, Honda VT1100 C3 Shadow Aero 1998-2002, Honda VT1100 D2 Shadow American Classic Ed 1997, Honda VT1100T Shadow American Classic Ed Tourer 1998-2001, Honda VT1300 CX10 (Fury/Chopper) (Non ABS) 2010-2015, Honda VT1300 Interstate 2011-2015, Honda VTX1300S Retro /C/R/T 2003-2013, Honda VTX1300 C/R/S Retro 2003-2006.
  • Size:Front:102x38x9.8mm,Rear:86.3x41.4x10.2mm.
  • Semi-metallic brake pads produced by OEM.
  • High Temperature resistant,pollution free,safe,durable and comfortable.
  • Professional manufacturer,designed for exceptional stopping power and long usable life.
  • Quality Assurance!If you are not satisfied with our products,we accept all of the return,replacement or refund requests.
Check Stock

72 inch DENALI UTV Snow Plow Kit - for UTVs with a 2 inch Receiver

  • Fits: UTVs and SxSs: Polaris Ranger, Brutus, General & RZR.
  • CanAm Commander, Defender, Maverick & Trail/Sport.
  • Heavy duty 72″ straight plow blade, made of 11 gauge steel and designed in America.
  • Four 7 gauge ribs run the full height of the blade and 3 additional horizontal stabilizers support the deepest point of the blade.
  • Includes straight plow blade, mount plate, replaceable wearbar, push tubes, adjustable skid feet and installation hardware.
Check Stock

Honda 08206-9002PE Power Steering Fluid Pack of 3

  • Honda genuine power steering fluid is manufactured for all Honda vehicle power steering systems.
  • Other manufacturer's power steering fluid may damage the Honda power steering system.
Check Stock

TALON GRIPS for CZ 2075 RAMI

  • TALON Grips are a US patented single piece wrap around adhesive grip custom designed for an OEM quality fit and finish on each firearm.
  • Create a functional and positive interface between the operator and the firearm.
  • Available in rubber or granulate texture.
  • At only 0.5mm in thickness, TALON Grips create no percepticle increase in grip thickness.
  • Package includes one TALON Grip, prep pad, TALON Grips sticker, and installation instructions.
Check Stock