xTool D1 36w Higher Accuracy Laser Engraver with Material Box, 5w-7.5w Laser Cutter and Engraver Machine, Support LightBurn, Laser Engraver for Wood and Metal, Vinyl, Acrylic, Paper(17'x15.98')
- 【Finer Details by 0.08*0.08mm Ultra-fine Compression Spot】xTools D1 is the Best DIY laser cutter and engraver machine for beginners/business starter/ hobbyists/designers/home-makers/professionals. It adopts the latest high power 5-7.5W laser module with 0.08mm ultra-fine compressed spot, cutting speed up to 10000mm/min, can cut 8mm wood board and 3mm acrylic in one pass, directly engrave uncoated stainless steel.
- 【Higher Accuracy Cutter and Engraver Machine】The all-steel wheel and shaft and synchronous belt enable motion accuracy of up to 0.01 mm and repeatable positioning accuracy of less than 0.02 mm, allowing the xTool D1 laser engraving machine to engrave and cut all details of design drawings 1-to-1 with high silence throughout. It maintains a perfect engraving effect even after long times use.
- 【All in One Kit】These xTool D1 kit comes with the xTool D1 laser cutter and engraver machine, rotary attachment and laser material Box. With a rotary attachment, xTool D1 can engrave diameter cylinders as small as 3mm. The laser material box include 10 kinds of popular materials, including metal, wood, rubber, etc. You can start your creation quickly with xTool D1 Rotary attachment and Materail kit.
- 【Wide Compatibility and Multiple Connection W....
Check Stock
xTool D1 Laser Engraver with Rotary & Material Box, 10W Higher Accuracy Laser Cutter, 60W Laser Cutting Machine, Laser Cutter and Engraver Machine, Laser Engraver for Wood and Metal, 17'' x 16''
- You May Be Wondering - 10W is laser output power, which measures the capability of the machine to cut and 60W is the machine power of the laser machine.
- Fulfill Your Imagination with One Pass - xTool D1 works well on cutting a 10mm wood board and a 5mm black acrylic in one pass, smoothly cutting surface with fewer burn marks.
- All-Metal Made - The all-steel wheel, shaft, and enclosed synchronous belt make the xTool D1 laser engraver more stable with less noise and 3 lifetimes longer than similar products.
- Higher Accuracy - xTool D1 laser cutter adopts a 0.08mm*0.06mm ultra-fine compression spot, achieving detailed and vivid engraving images.
- Wide Compatibility - xTool D1 supports LightBurn and xTool Creative Space software (Newly upgraded). You can transfer data via Wi-Fi, USB cable, and TF card to use the laser engraver.
- Turn Your Imagination Into Creativity - xTool D1 10W is suitable for more professional creators, like carpenters, craftsmen, artists, designers, practitioners of science and technology education and more.
- All-in-One Kit - Rotary Attachment and Material Box are also provided, with which you can start your creation quickly with the xTool D1 laser engraver and cutting machine.
- Eye Protection Design - The anti-UV filter acrylic on the laser mod....
Check StockXTOOL X100 Pad3 Key Programming Tool with Key Programming IMMO Matching Bidirectional Control OE Level All Systems Diagnosis 31+ Services 2 Years Free Updates Upgraded Version of Pad Plus
- 【Powerful IMMO & Key Programming】: XTOOL X100 Pad3 key programming tool with KC100 key programmer and EEPROM adapter, enables you to add/erase....
- 【Bidirectional Control & 31+ Services】: ➤XTOOL X100 Pad3 bidirectional scan tool uses active tests to test the working status of various systems....
- 【OE-Level Full Systems Diagnosis + Auto VIN & Auto Scan】: ➤XTOOL X100 Pad3 key fob programming tool can access and scan your car's all available....
- 【Additional User-Friendly Functions + Advanced Hardware Configuration】: ➤XTOOL X100 Pad3 auto key programming tool supports One-Click Update....
- 【Wide Car Coverage + Worry-Fr^e Purchase】: ➤XTOOL X100 Pad3 automotive key programming tool work for 12V Petrol Sedans, SUVs, Minivans and Light....
Check Stock
xTool D1 Laser Engraver with Rotary, 10W Higher Accuracy Laser Cutter, 60W Laser Cutter and Engraver Machine Support LightBurn, DIY Laser Engraver for Wood and Metal, Paper, Acrylic, 17'' x 16''
- You May Be Wondering – 10W is laser output power, which measures the capability of the machine to cut and 60W is the machine power of the laser machine.
- Fulfill Your Imagination with One Pass – xTool D1 works well on cutting a 10mm wood board and a 5mm black acrylic in one pass, smoothly cutting surface with fewer burn marks.
- All-Metal Made – The all-steel wheel, shaft, and enclosed synchronous belt make the xTool D1 laser engraver more stable with less noise and 3 lifetimes longer than similar products.
- Higher Accuracy – xTool D1 laser cutter adopts a 0.08mm*0.06mm ultra-fine compression spot, achieving detailed and vivid engraving images.
- Wide Compatibility – xTool D1 supports LightBurn and xTool Creative Space software (Newly Upgraded). You can transfer data via Wi-Fi, USB cable, and TF card to use the laser engraver.
Check StockXTOOL Key Programming Tool X100 Pad3 with KS-1 Key Programmer Work for Toyota/Lexus OE Level Full Systems Diagnosis Bidirectional Control 24 Services Injector Coding/ABS Bleeding/TPMS Reset
- 【Full Systems Diagnosis & Bi-Directional Control】: All Systems Diagnosis can access and scan all available systems in your vehicle, such as ECM,....
- 【24 Service Functions】: XTOOL X100 Pad3 features 24 Services, like Key Programming, EEPROM Adapter, Injector Coding, ABS Bleeding, TPMS Reset, Oil....
- 【Expand Key Programming Function】: XTOOL KS-1 key chip programmer works for Toyota/Lexus Lost_All_Keys. The 5 in 1 smart key programmer can remove....
- 【Extensive Vehicle Coverage】: Wide coverage of 85 car makes in the United States, Europe, Asia, Australia and other countries or regions.....
- 【Customer Service Help】: XTOOL X100 Pad3 with KS-1 scan tool comes with 2 Years Warranty and 2 Years Free Update Online. For any product problems....
Check Stock
Ball Vise Engraving Setting Tool 360°Rotation Professional Ball Vise 30 PCS Attachment Jewelry Engraving Block Tools Standard Block (3inch)
- You May Be Wondering - 5W is laser output power, which figures measure the capability of the machine to cut and 36W is the machine power of the laser machine.
- Higher Accuracy - xTool D1 laser cutter adopts a 0.08mm*0.08mm ultra-fine compression spot, resulting in detailed and vivid engraving images.
- All-Metal Made - The all-steel wheel, shaft, and enclosed synchronous belt make the xTool D1 Laser engraver more stable with less noise and 3 lifetimes longer than similar products.
- Fulfill Your Imagination with One Pass - xTool D1 works well on cutting a 6mm wood board and a 3mm black acrylic in one pass, smoothly cutting surface with fewer burn marks.
- Wide Compatibility - xTool D1 supports LightBurn and Laserbox Basic (available on mobile devices). You can transfer data via Wi-Fi, USB cable, and TF card to use the laser engraver.
- Make Your Creativity a Breeze - xTool D1 5W is the ideal and user-friendly laser engraver for beginners to start off with, like making greeting cards, patterns-engraving, and your personal artwork.
- Eye Protection Design - The anti-UV filter acrylic on the laser module filters 97% of UV rays to protect your eyes and those around you.
- Professional Support - We have a professional US technical team and support website to solve all your p....
Check Stock
xTool Air Assist, Partner for xTool D1 and D1 Pro Laser Engraver, Jewerlry Making Engraving Tools, 30 L/min Air Output for Laser Engraving Machine
- ...ist set on the laser engraver for Jewelry, large and stable air blows away smoke and debris generated during laser engraving machine working, helping engraver to cut faster and deeper, increasing laser efficiency, thus saving your time.
- 【Clean Surface & Smooth Edge】xTool Air Assist Set uses air to quickly reduce the temperature of the cut material surface, preventing distortion and discoloration due to high temperatures, ensuring smooth lines,complete patterns, and clean material surfaces.
- 【Keep Low Noise & Vibration】Air Assist Set has the advantages of low noise and vibration. The vibration generated by the air-assisted device, during working process will not affect the positioning of the laser head, ensuring continuous cutting of lines and complete patterns.
- 【Protect Laser Head】xTool air assist set has a stable air output system that blows away the acceptable debris and smoke generated during the laser head's work, protecting the laser head's lens from contamination and extending the laser head's service life.
Check Stock
xTool D1 Laser Engraver, 5W Ultra Accurate Laser Engraving Machine, 36W DIY Laser Cutter Support LightBurn, Laser Engraver for Wood and Metal, 17'' x 16''
- You May Be Wondering - 5W is laser output power, which figures measure the capability of the machine to cut and 36W is the machine power of the laser machine.
- Higher Accuracy - xTool D1 laser cutter adopts a 0.08mm*0.08mm ultra-fine compression spot, resulting in detailed and vivid engraving images.
- All-Metal Made - The all-steel wheel, shaft, and enclosed synchronous belt make the xTool D1 Laser engraver more stable with less noise and 3 lifetimes longer than similar products.
- Fulfill Your Imagination with One Pass - xTool D1 works well on cutting a 6mm wood board and a 3mm black acrylic in one pass, smoothly cutting surface with fewer burn marks.
- Wide Compatibility - xTool D1 supports LightBurn and Laserbox Basic (available on mobile devices). You can transfer data via Wi-Fi, USB cable, and TF card to use the laser engraver.
- Make Your Creativity a Breeze - xTool D1 5W is the ideal and user-friendly laser engraver for beginners to start off with, like making greeting cards, patterns-engraving, and your personal artwork.
- Eye Protection Design - The anti-UV filter acrylic on the laser module filters 97% of UV rays to protect your eyes and those around you.
- Professional Support - We have a professional US technical team and support website to solve all your p....
Check Stock
Under Siege
- 3-IN-1 INNOVATION: World's first desktop hybrid laser & blade cutting machine that is perfect for gift-making. xTool M1 integrates Laser Engraving, Laser Cutting and Blade Cutting into one, allowing you to do way more with a super wide range of materials.
- 300+ MATERIALS SUPPORTED: xTool M1 can cut or engrave 300+ materials including Vinyl/Metal/Leather/Wood/Paper/PVC/Fabric/Iron-on/Cardboard/Felt/Ceramics/Plastic. You can use the blade head to cut vinyl to avoid burnt edge, discoloration and unhealthy fumes.
- POWERFUL, FAST & ACCURATE: Adopting dual laser technology, xTool M1 laser engraver achieves True 10W output power, capable of cutting a 10mm wood in one pass. Compressed spot technology with a FAC lens achieved ultra-fine 0.01mm Engraving precision at a speed up to 15000mm/min.
- SMART & 3 STEPS TO START: Equipped with a 16MP high resolution camera inside, xTool M1 can initiate auto-focusing, realize visual processing, and get creations in just 3 simple steps. It also can extract images, designs, and drawings for further creative design and do batch processing with the AI system..
Check Stock
Platy for Prezi!
- 3-IN-1 INNOVATION: World's first desktop hybrid laser & blade cutting machine that is perfect for gift-making. xTool M1 integrates Laser Engraving, Laser Cutting and Blade Cutting into one, allowing you to do way more with a super wide range of materials.
- 300+ MATERIALS SUPPORTED: xTool M1 can cut or engrave 300+ materials including Vinyl/Metal/Leather/Wood/Paper/PVC/Fabric/Iron-on/Cardboard/Felt/Ceramics/Plastic. You can use the blade head to cut vinyl to avoid burnt edge, discoloration and unhealthy fumes.
- POWERFUL, FAST & ACCURATE: Adopting dual laser technology, xTool M1 laser engraver achieves True 10W output power, capable of cutting a 10mm wood in one pass. Compressed spot technology with a FAC lens achieved ultra-fine 0.01mm Engraving precision at a speed up to 15000mm/min.
- SMART & 3 STEPS TO START: Equipped with a 16MP high resolution camera inside, xTool M1 can initiate auto-focusing, realize visual processing, and get creations in just 3 simple steps. It also can extract images, designs, and drawings for further creative design and do batch processing with the AI system..
Check StockXTOOL D7 Diagnostic Scan Tool 2022 Newest Bi-Directional Control 28+ Services All System Diagnostic Key Programming Power Balance EVAP Test ABS Bleed Injector Coding Oil Reset EPB SAS DPF
- 【2022 BEST BANG FOR THE BUCK BIDIRECTIONAL SCANNER】XTOOL D7, 2022 newest version, has packed Full Bi-Directional Controls, All Systems....
- 【FULL BI-DIRECTIONAL CONROL】Pulling codes is not diagnostics! XTOOL D7 scan tool can control various vehicle systems, valves, solenoids to perform....
- 【28+ SPECIAL FUNCTIONS】XTOOL D7 automotive diagnostic tool comes with comprehensive special functions that DIY mechanics or auto service tech....
- 【OE ALL SYSTEMS DIAGNOSTICS】D7 auto scan tool can access all available vehicle modules like Engine/Auto Trans/ABS/Airbag/Body/Chassis/ Brake/HVAC....
- 【BROAD VEHICLE COVERAGE】XTOOL D7 car diagnostic computer works on 85+ brands, 140+ models and 10,000+ cars globally, including American, European....
Check StockxTool Honeycomb Working Table Soulmate for xTool D1 D1 Pro and Most Laser Engravers Honeycomb Working Panel for Fast Heat Dissipation and Desktop-Protecting 19.68 x 19.68 x 0.87
- 【Protect Materials】xTool honeycomb working table is a must-have component for laser cutting and engraving machines. Honeycomb plate and aluminum....
- 【Fast Heat Dissipation】xTool honeycomb working table is made of iron and aluminum, making them more more stable, durable and rust-resistant. Flat....
- 【Comprehensive Protection】The honeycomb working table comes with an aluminum panel that can protect your desk from laser damage. We also provide....
- 【Large Size Honeycomb Panel】The size of the honeycomb working table is 19.68 x 19.68 x 0.87 inches ( 500 x 500 x 22 mm ). The edges of the....
- 【Wide Compatibility】xTool honeycomb working table set is perfect for xTool D1, D1 Pro laser engraving machines. Honeycomb panel set is also....
Check StockxTool M1 10w Compact 3-in-1 Laser Engraver & Cutting Machine with RA2 Pro & Material Box Higher Accuracy & Smarter 16MP Auto-Focus Create Customized Wood/Metal/Paper/Acrylic/Iron-on/Vinyl
- 3-IN-1 INNOVATION: World's first desktop hybrid laser & blade cutting machine that is perfect for gift-making. xTool M1 integrates Laser Engraving,....
- 300+ MATERIALS SUPPORTED: xTool M1 can cut or engrave 300+ materials including....
- POWERFUL, FAST & ACCURATE: Adopting dual laser technology, xTool M1 laser engraver achieves True 10W output power, capable of cutting a 10mm wood in....
- SMART & 3 STEPS TO START: Equipped with a 16MP high resolution camera inside, xTool M1 can initiate auto-focusing, realize visual processing, and get....
- SAFELY & ENVIRONMENT-FRIENDLY: Class I(FDA Certificated) safety rating. The viewing cover can filter blue light to protect your eyes. A built-in fan....
Check Stock
