Categories

Best Yrt Rotary Table Bearing

Elite Syncopations

  • Classic Scotts 20 inch push no-motor manual reel rotary lawn mower features 20" cutting width, 5-blade ball bearing reel, and 10" dual tracking wheels.
  • Quick-snap 1"-3" cutting height adjustment for a clean, even cut every time with this Scotts classic hand push reel rotary 20 inch lawn mower.
  • Blades on the Scotts classic hand push reel rotary 20 inch lawn mower are made of quality, heat-treated alloy steel for staying sharp longer.
  • Ergonomic handle with cushioned grip for comfort when using the Scotts 20 inch 5-blade manual hand push no-motor reel lawn mower.
  • This engine-free, no-motor, classic manual reel hand push lawn mower requires no gas or oil.
Check Stock

Table Lamp LED Dimmer Switch Kit Zing Ear ZE-03 300W Max Inline Rotary LED Dimmer Switch with 4 Knobs

  • Zing Ear ZE-03 2 wire rotary light triac dimmer switch provides full range dimming with on-off settings..
  • Dimemer switch electrical rating: 120VAC/240VAC/ 60W-300W Max/60 Hz, it is suitable most of country in the world and application in most of light fixture..
  • This rotary lamp dimmer switch is UL approved therefore it can be safely integrated into any table lamp or light fixture in North America..
  • Rotary table lamp dimmer switch includes 2 wire leads,4.0 inch each to allow versatile installation for various table lamps including table lamps, desk lamps, wall-mounted lamps, wall sconces..
  • Material: Insulation paper housing, For Indoor use only, works with Incandescent lighting..
Check Stock

New HV6-3 Slots Rotary Table & Steel Dividing Plates Set with Operation Manual Precision Quality Engineering Accessories Rotary Table Milling Vice Vise Machine Tools

  • HV6 Rotary Table, Dividing Plate , Rotary Table Diameter :150 mm (6") Overall Height : 80 mm ( 3-1/4") Centre Height in Vertical Position: 105 mm....
  • Centre Bore of the Table: 2 MT 2 Oiling Points for a direct lubrication of the Table for longer life & better performance. Can be clamped in....
  • More Information about the Dividing Plate :- Set of 3 dividing plates designed to fit our HV4 & HV6 Rotary Tables. Centre Hole of the Plate is 21 mm....
  • A set of Steel Dividing Plates for Indexing with all required Accessories..
Check Stock

ADINTERNATIONAL HV6-4 Slots Rotary Table With Steel Dividing Plates Set with Operation Manual Precision Quality Rotary Table Milling Vice Vise Machine Tools

  • Rotary Table Diameter :150 mm (6") Overall Height : 80 mm ( 3-1/4") Centre Height in Vertical Position: 105 mm.
  • Centre Bore of the Table: 2 MT 2 Oiling Points for a direct lubrication of the Table for longer life & better performance. Can be clamped in....
  • More Information about the Dividing Plate :- Set of 3 dividing plates designed to fit our HV4 & HV6 Rotary Tables. Centre Hole of the Plate is 21 mm....
  • A set of Steel Dividing Plates for Indexing with all required Accessories..
Check Stock

Dremel 575 Right Angle Attachment for Rotary Tool- Angle Drill Attachment , Black

  • Dremel 575D Right Angle Attachment for Dremel Rotary Tool quickly and easily converts your Dremel rotary tool to a right angle tool.
  • This accessory will enhance the versatility of your Dremel tools allowing you to get into hard-to-reach areas.
  • Quick connect system easily attaches to your rotary tool in place of the housing cap without the need of tools.
  • Coupling system allows you to orient the right angle attachment on your tool in 12 different directions.
  • Ball bearing and spiral bevel gears give long lasting durability along with smooth and cool operation.
Check Stock

CALCA 24 Inch Precision Rotary Paper Cutter Paper Trimmer 24 inch Manual Sharp Photo Paper Trimmer and Cutters

  • CALCA 24 Inch Manual Precision Rotary Paper Trimmer, Sharp Photo Paper Cutter - If you want buy the Cutting Blade separately for 24 Inch Rotary Paper Trimmer, the ASIN is B0B4NKT4N4 ..
  • [Features]: The blade is made of finest steel Self-sharpening blade cuts in either direction Grids in both inches & centimeters Come with rubber feet for desktop use 1 extra spare carbide rotary blade.
  • [Advantage]: High efficient, the blade is sharp and cut paper well Long lifespan, the blade can be used for longer time Accurate cutting with dual-mode scale, brings good cutting effect without rough edge The paper cutter is steady on the table for cutting, and it's very convenient to use.
  • [Application]: This rotary paper cutter trimmer is used for cutting photo paper, graphic photo film, canvas, laminating film, etc. The Paper Trimmer is widely applying to photo studio, photo sticker store, office and so on..
  • [Notices]: This rotary paper cutter is used to cut paper within the thickness of 1mm. Its breadth is 24 inch and working table is 800*315mm(32*12in)..
Check Stock

MR52 ZZ Bearing ABEC-5 (10PCS) 2x5x2.5 mm Miniature MR52ZZ Ball Bearings L-520ZZ W52 for Fidget Spinners, Micro Motor, Office Equipment

  • MR52ZZ (ID=2mm, OD=5mm, Thickness=2.5mm).
  • Bearing made from Chrome Steel for durability and resistance.This type bearing is Miniature Single Row Deep Groove Ball Bearing,mainly take the radial load as well as moderate axial load..
  • Bearing are fitted with two steel dust shields to prevent ingress of dirt and foreign matter, high temperature resistance..
  • Bearing Features: simple configuration,high speed,hight precision,less coefficient of friction,less vibration and noise,most widely used..
  • Miniature Deep Groove Ball Bearing suitable for all kinds of industrial equipment, micro motor,small rotary motor,office equipment and so on..
Check Stock

CANPUMP Stainless Steel Flat Surface Cleaner 24 for Power Pressure Washer

  • Max working pressure of 4000 PSI at 8 GPM.
  • Strong Rotary Bearing and gun for professional job ,Reinforcement Plate for exceptional Balance and stability of the Bearing.
  • For cleaning Driveways, Sidewalks, Stamped Concrete Patios and Garages.
Check Stock

Brand New HV6 Rotary Table Milling Indexing Kit Precision Quality Engineering Accessories Milling Vice Vise Machine Tools

  • HV6 Rotary Table, Rotary Table Diameter :150 mm (6").
  • Overall Height : 80 mm ( 3-1/4") Centre Height in Vertical Position.
  • Gear Ratio- 1:90, which means that the 1 handle rotation shall turn the table by 4 Degrees..
  • Shipped from India. Delivery within 7 to 10 days !!.
Check Stock

BestEquip Rotary Table 4inch/100mm Horizontal Vertical Rotary Table 4-Slot Rotary Table for Milling Machine Rotary Table for Milling 360 Degrees Precision Rotary Table

  • 4" Vertical & Horizontal Design: Our rotary table for milling machine is 4"/100mm with 4 slot can be used in both horizontal and vertical....
  • Remarkable Quality: HT200 Casting is mainly used to cast parts subjected to pressure and vibration on mechanical equipment, offering rotary table for....
  • Excellent Precision: The precision rotary table' indexing plate can be graduated 360 Degrees. Resetting dial and hand wheel can be graduated in....
  • Convenient To Adjust: The dial is marked with an accurate scale. Just operate the control handle and adjust it to the desired position, which makes it....
  • Multiple Application: With free wrench and set of screws, the power milling machines are widely used in mini milling machine like index boring,....
Check Stock

Under Desk Drawer Storage Organizer - 2 Pack (Large and Small) Beige - (Please Note Drawer Size / No Lip Under Desktop / Smooth Desktop)

  • ...n support items weighing up to 15 pounds and can withstand years of daily use..
  • 【Drawers Size and Services】This drawer set contains 1 large size (12.67inch x11.1inch x2.16inch) and 1 small size (8.77inch x5.98inch x1.96inch). Provide High quality no-trace pasting that has strong waterproof performance, high load-bearing performance, and does not damage the desktop.Rejecting messy desktops and freeing up more office space. If there is any problem with the product, we provide free return or exchange service, which will not cause you any loss..
Check Stock

Scotts Outdoor Power Tools 2000-20S 20-Inch 5-Blade Classic Push Reel Lawn Mower Green

  • Classic Scotts 20 inch push no-motor manual reel rotary lawn mower features 20" cutting width, 5-blade ball bearing reel, and 10" dual tracking wheels.
  • Quick-snap 1"-3" cutting height adjustment for a clean, even cut every time with this Scotts classic hand push reel rotary 20 inch lawn mower.
  • Blades on the Scotts classic hand push reel rotary 20 inch lawn mower are made of quality, heat-treated alloy steel for staying sharp longer.
  • Ergonomic handle with cushioned grip for comfort when using the Scotts 20 inch 5-blade manual hand push no-motor reel lawn mower.
  • This engine-free, no-motor, classic manual reel hand push lawn mower requires no gas or oil.
Check Stock

Huepar Laser Level Adapter Metal 360-Degree Rotating Base for Laser Level Tripod Connector 1/4’’ Threaded Mount and Horizontal Bubble Micro-adjust Fine Turning Pivoting Base AT2

  • ✔️THREE ROTARY KNOBS FOR ADJUSTMENT: The micro rotary knob enables users to make 360°adjustment. The X rotary knob and Y rotary knob can be used....
  • ✔️HEIGHT ADJUSTABLE and BUILT-IN HORIZONTAL BUBBLE: Users can adjust the height by rotating the three legs of the adapter even on a tilt....
  • ✔️1/4 INCH MALE THREAD AND 5/8 INCH THREADED MOUNT: 1/4 inch male thread is suitable for any type of tool that comes with a mount size of 1/4....
  • ✔️DURABLE DESIGN: This adapter features, durable design for bearing heavy loads and can withstand wear and impact of the job-site..
  • ✔️WIDE APPLICATIONS: AT2 adapter can be connected to any device that features a male thread as well as Huepar, 622CG/R, 621CG/R, 8211G, 8300G,....
Check Stock