Categories

Best Z Axis Coupler

LiFuJunDong 4 Axis USB CNC6040 Router Engraving Machine 3D Milling Machine w/Controller 110V 1.5KW VFD Water-Cooling Router Engraving Machines for Metal, Wood, Glass and Plastic (6040 1.5KW 4AXIS)

  • ENGRAVING MACHINE PARAMETERS】 X, Y, Z Working Area: 600(Y)*390（X）*120(Z)mm Outside dimension: 865*680*570mm（L*W*H） Table size: 770（Y）*490（X）mm Lathe structure: 6061/6063 Aluminium alloy Max. Feeding height: ≤100mm Drive unit: X axis---1605 Ball Screws Y axis---1605 Ball Screws Z axis---1204 Ball Screws Sliding unit: X axis---High intensity Chromeplate shaft Y axis---High intensity Chromeplate shaft Z axis---High intensity Chromeplate shaft Stepping motor: 57 two-phase 3A 150N.cm.
  • SPINDLE MOTOR-1】 Outside dimension: 65*158mm Material: 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket VOLTS, current, power: AC110V, 60Hz, 5A, 1.5 KW VFD Spindle motor: 1.5 KW Water Cooled Spindle speed: 24000 rpm Max working frequency: 400Hz Principal axis collet: ER11collet, Standard configuration :6mm Nut Model: ER11-A Cooling: Water-cooling Speed ​​mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM.
  • SPINDLE MOTOR-2】Lubrication way: lubricated by high grease Repeat accuracy: 0.05mm Spindle precision: radial beat acuities 0.03mm Carving Instructions: G code / TAB files / nc file / NCC files Communication interface: through USB connection with computer Working Speed: 50-1500mm / min (differ....
Check Stock

XYZR 4 Axis 3.54\x3.54\ Manual Linear Positioning Stage Bearing Tuning Platform Sliding Table 90mmx90mm

  • Table size: 90*90mm (3.54inch). R Axis: Diameter=90mm.
  • Moving direction: X,Y, Z,R Axis, Load: 29.4N(3kgf).
  • Travel: XY:±12.5mm , Z: ±10mm , R Axis:360° (±5° fine tuning).
  • Using cross roller guide can achieve high precision, smooth movement.
  • Main material for aluminum, light weight, suitable to be built in other devices.
Check Stock

Comgrow ROBO Table CNC Router Machine with GRBL Offline Control,3-Axis Engraving Milling Machine 300x180x45mm Working Area for Carving Cutting Plastic Acrylic PCB PVC Wood Aluminum brass

  • 【Upgrade Comgrow CNC ROBO 】Comgrow cnc router 3 Axis 42 stepper motor are X/Y/Z Axis power, the axis moves more smoothly. 775 spindle motor up to 10000r/min. and comes with short circuit protection, no need to worry about module damage..
  • 【CUSTOMISED SETTINGS】Metal CNC machine cutter Full Aluminum Alloy tray Working area: 30x18x4.5CM. Meets most of the engraving needs.
  • 【AUTOMATIC TOOL-SETTING】CNC Router for metal aluminum copper can calibrate the zero of the Z axis autonomously, with the functioning of embedded sensors During the engraving process, there is no need to manually adjust the height of the Z axis to make the drill touch the surface of the engraved object.
  • 【 a wide range of projects and materials】the comgrow cnc router machine Capable of cutting and engraving all types of plastics, soft aluminum, Copper, woods, acrylics, PVCs, PCBs and MDF, the setting parameters of different materials can refer to the product page below middle"".
  • 【more Simply Assemble and Use】This table cnc router machine kit is mainly designed for DIY carving enthusiasts/beginners, easily assembled and opertated, coming with a paper manual and SD Card of all the files. Please let us know if you need any help ..
Check Stock

Creality Sermoon D1 3D Printer Silent Motherboard Double Z-axis Sheet Metal Base 4.3-inch Touch Screen Large Printing Size 280 x 260 x 310mm

  • Silent Mainboard&Excellent Extrusion Kit: Sermoon D1 equipped with self-developed 32 bit silent mainboard, which makes it possible to enjoy your....
  • Industrial-grade Printing: Semi-closed chamber with sheet metal base features provides higher stability and a silent printing environment. Aluminum....
  • Double Z-axis: Sermoon D1 use the double Z-axis design concept. By using double z-axis, T-type double screw rod, V-wheel synchronous component and....
  • Convenient and smart: Sermoon D1 is endowed with 45 degree installed 4.3-inch Color Touch Screen, which makes it easy to view and operation. The....
  • What you will get: A Ceality Sermoon D1 3D printer which combines perfect fusion of modern aesthetics and technological, lifetime technical....
Check Stock

2 Pieces CNC Router Z-Axis Tool Setting Touch Plate CNC Touch Plate Probe Block Router Probe Milling Tool for Milling DIY Engraving Machine Probe

  • Package includes: you will receive 2 pieces of CNC router Z-Axis tool touch probes, which are equipped with high precision, smooths surface, and....
  • Size parameters: the size of this setting touch plate probe measures approx. 40 x 10 mm, and the length of cable measures approx. 1.2 cm, which can....
  • Reliable material: this CNC router Z-Axis tool is made of quality alloy material, strong and durable, and the bottom is insulated, waterproof and....
  • Easy to use: this Z-Axis router tool setting touch probe has the characteristics of high accuracy, smooth surface and exquisite design, and it is easy....
  • Wide range of application: this setting touch plate probe is suitable for processing most materials, such as woodworking, aluminum, acrylic, plastic,....
Check Stock

Genmitsu 3020-PRO MAX CNC Router Machine for Metal Carving and more, GRBL Offline Controller, with Limit Switches & Emergency-Stop, XYZ Effective Working Area 300 x 200 x 72mm (11.8 x 7.9 x 2.8inch)

  • Bigger and better with an all new extra rigid and beefy design featuring an increased Z Height of 72mm dual steel X axis guide rails, all aluminum spindle holder and 300W spindle. All these upgrades make metal carving easier, ideal for an endless variety of drilling, and carving operations on various metals, like brass, copper and 6061 aluminum, etc..
  • Upgraded linear guide structure and 4040 Y axis profiles highly improve the engraving accuracy and processing strength, eliminating Z axis wobble issues that most other desktop CNC machines have..
  • One-piece machined and molded aluminum design ensures flatness and strength of the work platform. Integrated measurement scale is convenient for material positioning. The platform is compatible with most of the CNC clamps on the market..
  • Everything you need out of the box. The Genmitsu 3020-PRO MAX router already includes all of the accessories and components you need at an affordable price, including offline controller, XYZ axis limit switches, emergency stop switches, Z-probe and more..
  • The pre-assembled module of XZ Axis Gantry and Base A....
Check Stock

3-Axis 32-bit ARM Based CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling,Support 500W Spindle/NEMA23 Stepper Motor/Laser (A4988+Fan)

  • Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
  • Input voltage: 12-24VDC .CNC Router Machine Controller board.
  • Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
  • support 775 motor, 200W/300W/500W spindle.
  • support dual Y-axis use, three-axis and two-axis switching use.
  • support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
  • Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
  • Support software：LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
  • Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..
Check Stock

WEN 33075T 11-Amp Variable Speed 16-Inch Benchtop Milling Machine with Digital Readout and Extra-Large Mill Table

  • Variable speed operation ranges from 100 to 2000 RPM while the LED monitor displays the current spindle speed.
  • Spacious 27.6 by 6.3-inch work table combined with the 14.5-inch max distance between spindle and table provides ample room for larger workpieces.
  • Table travels 19.75 inches along the X-axis and 6.5 inches along the Y-axis while the headstock travels 9.75 inches along the Z-axis.
  • Digital Z-axis DRO depth gauge showcases exact spindle travel for maximum precision.
  • Includes an R8 spindle taper, a 2.75-inch spindle travel, a pre-installed drill chuck (1/32 to 3/4 inch), fine-tune adjustment hand wheels, a transparent chuck guard, an emergency stop button, onboard measurement indicators, a 15-inch swing, two M10-1.5 T-nuts, 12mm T-slots, and a two-year warranty.
Check Stock

Official Creality Ender 3 Max Neo 3D Printer Upgrade Large Size FDM 3D Printers with CR Touch Auto Leveling Bed Filament Sensor Z-axis Double Screw Printing Size 302x300x320 mm

  • 【CR Touch Auto Bed Leveling】The CR Touch intelligent leveling system can automatically compensate the printing height at different points of the....
  • 【Power Loss Recovery and Filament Sensor】The Creality 3D Printers features the function of detecting filament runout or breakage/power loss and....
  • 【High-precision Dual Z-Axis Higher Printing Precision】With a Z-axis dual-screw+Z-axis dual-motor design, works smoother and more synchronously to....
  • 【Simple Quick Assembling 】96% of the printer body is pre-installed, making assemblingextremely convenient with only 3 steps and the maintenanceof....
  • 【12-months Parts Repair】Creality 3D printers are provided lifetime technical assistance and 12-months Parts Repair..
Check Stock

Official Creality Ender 3 Max Neo 3D Printer Upgrade Large Size FDM 3D Printers with CR Touch Auto Aux Leveling Bed Filament Sensor Z-axis Double Screw Printing Size 301x300x320 mm

  • 【CR Touch Auto Bed Leveling】The CR Touch intelligent leveling system can automatically compensate the printing height at different points of the....
  • 【Power Loss Recovery and Filament Sensor】The Creality 3D Printers features the function of detecting filament runout or breakage/power loss and....
  • 【High-precision Dual Z-Axis Higher Printing Precision】With a Z-axis dual-screw+Z-axis dual-motor design, works smoother and more synchronously to....
  • 【Simple Quick Assembling 】96% of the printer body is pre-installed, making assemblingextremely convenient with only 3 steps and the maintenanceof....
  • 【12-months Parts Repair】Creality 3D printers are provided lifetime technical assistance and 12-months Parts Repair..
Check Stock

ANNOYTOOLS ARM 32-bit 3-Axis CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling DRV8825 Standalone Driver,Support 500W Spindle/NEMA17/23 Stepper Motor/Laser Module

  • Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
  • Input voltage: 12-24VDC .CNC Router Machine Controller board.
  • Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
  • support 775 motor, 200W/300W/500W spindle.
  • support dual Y-axis use, three-axis and two-axis switching use.
  • support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
  • Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
  • Support software：LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
  • Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..
Check Stock

Official Creality Ender 3 S1 Pro Direct Drive FDM 3D Printers with Auto Leveling Bed 300℃ high Temperature hotend Filament Sensor Spring Steel PEI Magnetic Build Plate Printing Size 220x220x270mm

  • 【"Sprite" Direct Dual-gear Extruder】Creality Ender-3 S1 Pro 3D Printer Equipped Brand-new self-developed "Sprite" direct dual-gear extruder....
  • 【CR Touch AUTO-Leveling bed 】Ender 3 S1 3D printer is equipped with CR Touch Sensor, which is indepently developed. The intelligent leveling....
  • 【Filament Breakage Detecting and Power Off Resume Printing】Ender-3 S1 Pro features the function of detecting filament runout or breakage/power....
  • 【High-precision Dual Z-Axis Higher Printing Precision】With a Z-axis dual-screw+Z-axis dual-motor design, Ender 3S1 Pro works smoother and more....
  • 【After Sale Worry-Free】Creality 3D printers are provided lifetime technical assistance and 12-months hardware warranty. Whenever or why, when....
Check Stock

Official Creality Ender 3 S1 Pro Direct Drive FDM 3D Printers with Auto Leveling Bed 300℃ high Temperature hotend Filament Sensor Spring Steel PEI Magnetic Build Plate Printing Size 220x220x270mm

  • 【"Sprite" Direct Dual-gear Extruder】Creality Ender-3 S1 Pro 3D Printer Equipped Brand-new self-developed "Sprite" direct dual-gear extruder....
  • 【CR Touch AUTO-Leveling bed 】Ender 3 S1 3D printer is equipped with CR Touch Sensor, which is indepently developed. The intelligent leveling....
  • 【Filament Breakage Detecting and Power Off Resume Printing】Ender-3 S1 Pro features the function of detecting filament runout or breakage/power....
  • 【High-precision Dual Z-Axis Higher Printing Precision】With a Z-axis dual-screw+Z-axis dual-motor design, Ender 3S1 Pro works smoother and more....
  • 【After Sale Worry-Free】Creality 3D printers are provided lifetime technical assistance and 12-months hardware warranty. Whenever or why, when....
Check Stock