EATON RF9640-NDW Z-Wave Plus Universal Dimmer, White
- Compatible Z-Wave controller/hub required.
- Z-Wave Plus devices can be controlled through voice assistants such as Amazon Alexa or Google Home when used with compatible Z-Wave controller/hub.
- Compatible with Z-Wave Plus accessory dimmer (RF9642-Z) for wireless 3-way control, eliminating the need for traditional 3-way wiring or dedicated traveler wire.
- Can be associated with up to 5 other Z-Wave Plus devices.
- Dimmable seven step blue LED display alongside push pad indicates selected light level - even in full daylight (coordinates light level status with associated dimmer accessory).
Check StockAeotec Z-Stick Gen5 Plus Z-Wave Plus USB to Create Your Own Z-Wave Hub SmartStart and S2 Enabled Works with Raspberry Pi 4 Compatible with SmartThings HomeSeer and Others
- Works with Raspberry Pi, Windows, Mac, Linux to create a z wave hub for control of Z-Wave and Z-Wave Plus devices.
- Easier device setup than standard Z-Stick Gen5. Now supports SmartStart device installation when used with compatible software connect Z-Wave devices....
- More secure than standard Z-Stick Gen5. Upgraded to offer Z-Wave Security 2 (S2) encryption, this Plus edition of Z-Stick is enhanced with AES 128-bit....
- Faster than standard Z-Stick Gen5. Plus edition offers a 50% speed performance when communicating securely vs. non Plus edition. And can be used to....
- Compatible with Z-Wave enabled, home automation software including Home Assistant, Home Seer, Indigo 7, OpenHab, and OpenHab2. No software included.....
Check Stock
Zooz 700 Series Z-Wave Plus S2 USB Stick ZST10 700, Great for DIY Smart Home (Use with Home Assistant or HomeSeer Software)
- READ BEFORE YOU BUY: The Z-Wave stick is for advanced users only, NOT for beginners. You must be comfortable with programming and have expert computer and Z-Wave knowledge to use this device..
- S2 SECURE NEW 700 SERIES Z-WAVE PLUS: Take advantage of the new 700 Series Z-Wave with more range and S2 authenticated security protocol. It means that you can fully benefit from your S2 sensors, switches, and plugs running on the latest Z-Wave chip..
- WHAT YOU NEED: This S2 700 Series Stick adds Z-Wave Plus capability to your DIY smart home set-up. You'll need a dedicated computer (PC, laptop, or Raspberry Pi, sold separately) and home automation software of your choice (not included) to complete the system..
- ADVANCED Z-WAVE: Works great with the most popular software like Home Assitant (with JS), Indigo, and HomeSeer. Supports OTA firmware updates (works with Aeotec OTA firmware tool) and and all of the latest Z-Wave library commands..
- SMART START: Supports the new quick and extra secure Z-Wave pairing method. Just scan the QR codes from any SmartStart Z-Wave Plus accessories to your home automation interface and power them on. They'll join automatically. Make sure your smart home software supports this feature..
Check StockAeotec Z-Stick Gen5 Z-Wave Hub Z-Wave Plus USB to Create Gateway (Ordinary White)
- Works with Windows / Mac / Linux / Raspberry Pi 4 (2020 upgrade) to create a zwave hub for control of Z-Wave plus and Zwave devices, Tiny but powerful.
- 1.1 x 0.4 x 3.5 inches in size and capable of controlling up to 232 different Z-Wave devices. package: 1x Z-Stick Gen5, 1x Manual, the others are not included.
- Can be used to upgrade the firmware of compatible Z-Wave Plus devices that can accept OTA / wirelss firmware upgrades.
- Compatible with Z-Wave enabled, home automation software including Home Assistant, Home Seer, Indigo 7, OpenHab, and OpenHab2. No software included.
- Z-Wave Plus certified. Certification number: ZC10-15060006.
Check StockEATON RF9642-ZDRB Z-Wave Plus Accessory Dimmer, Oil-Rubbed Bronze
- Wireless accessory for Eaton’s Z-Wave Plus Universal Smart Dimmer (RF9640-N).
- Ideal for applications where no traveler wires exist for 3-Way & multi-location control.
- Supports Z-Wave Plus technology including S2 Security certification for advanced encryption & cyber-security.
- Can be associated with (5) other Z-Wave Plus devices when used with a compatible Z-Wave controller.
Check Stock
Enbrighten 55256 Z-Wave Plus Smart Receptacle, Works with Alexa, Google Assistant, Tamper-Resistant, 1 ZWave 1 Always On Outlet Hub Required, White
- "ALEXA COMPATIBLE - REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products (Alexa device and hub sold separately). CANNOT connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus)..
- Requires a Z-Wave certified gateway. Compatible with the following Z-Wave certified Hubs: SmartThings, Wink, ADT Pulse, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Connect and Iris. Works with Alexa for voice control (hub required.
- Wirelessly control lights or appliances by turning them on and off, schedule a timed event, or create a custom scene from anywhere in the world, at any time of the day. Works with all LED, CFL, Halogen, and Incandescent bulbs..
- Features one always-on pass-through AC outlet and one Z-Wave enabled outlet with tamper resistant outlets..
- Requires in-wall installation with hard-wired connections - Neutral wire is REQUIRED (wall plate not included).DescriptionTransform any home into a smart home with the GE Z-Wave plus wireless smart lighting control Duplex receptacle. The GE Z-Wave Duplex receptacle enables wireless control of on/off functions from the Z-Wave controlled outlet, and is compatible with incandescent, LED, xenon, halogen....
Check Stock
Aeotec Siren 6, Z-Wave Plus S2 Enabled Zwave Siren Safety Speaker, Wall-Mounted Sound & Light Security Intruder Zwave Alarm with Backup Battery, 110dB
- Aeotec Zwave Siren 6 is your home smart indoor siren. Built with Z-Wave Plus S2 to be a smart home security siren, it features a 110dB speaker coupled with 1,000 lumens visual light alert strobe. Can be used as siren for security alarm, smoke sensor, and CO sensors via Z-Wave.
- Pre-loaded 6 security sounds, 8 safety sounds, and 30 tones in total. Each tone is volume adjustable between 80dB and 110dB.
- 4-hour backup battery lets Siren 6 work even when power is turned off.
- Can also be used as doorbell by pairing with Aeotec Button. Can use up to 3 zwave buttons, each sold separately.
- 5-Compatible with certified Z-Wave gateways including: Samsung SmartThings, HomeSeer, Open Z-Wave, Zipabox and more(Not compatible with Vera). Z-Wave Plus and Z-Wave S2 certified for quicker response time, better wireless range up to 490 feet in open space, and additional wireless security encryption. Z-Wave Plus certification number: ZC10-19046417..
Check StockEATON RF9642-ZDW Z-Wave Plus Accessory Dimmer, White
- Compatible Z-Wave controller/hub required.
- Z-Wave Plus devices can be controlled through voice assistants such as Amazon Alexa or Google Home when used with compatible Z-Wave controller/hub.
- Must be used with Z-Wave Plus Master Dimmer (RF9640-N).
- Multi-location dimming when used with master dimmer (RF9640-N).
- Dimmable seven step blue LED display alongside push pad indicates selected light level - even in full daylight (coordinates light level status with associated dimmer accessory).
Check StockAeotec Smart Switch 7, Z-Wave Plus S2 Wireless Control Socket Zwave Plug for Home Automation, 15A, Gen7, White
- Aeotecs smallest, best-certified smart plug built with Gen7, Z-Wave Plus, S2, and SmartStart. 30% smaller than past smart switches at only 2.4x1.5x1.2 inch - so small that it doesnt block other power outlets!.
- 99% accurate energy metering inbuilt. Analyses how much electricity youre spending in real-time and reports it back to Z-Wave gateway software..
- Z-Wave Plus, 700 series, and Z-Wave S2 certified for 30% quicker response time, 150% better wireless range, and 3-layers wireless security encryption. Z-Wave certification number: ZC12-20050064..
- Inbuilt surge protector: protects your electronics from surges / spikes that are up to 2,000 volts. Inbuilt over-current protection up to 16 amps..
- Compatible with certified Z-Wave gateways. Tested to work with Aetoec AutoPilot, Aeotec Smart Home Hub, Samsung SmartThings, Hubitat, Vera, ISY994i ZW and more..
Check StockAeotec Range Extender 7, Zwave Extender and Repeater (One Pack)
- WIRELESS ZWAVE REPEATER- Amplifies and repeats weak signals boosting the range and reliability of weak Z-Wave / Z-wave Plus devices. 250% further wireless range.
- 50% FASTER Z-WAVE COMMUNICATION- Built upon Aeotecs unique Gen7 hardware and firmware stack, stable performance, achieving seamless automation.
- SECURITY 2 SYSTEM COMPATIBLE- This particularly means it can amplify and repeat signals from security focussed devices, including door locks and smoke sensors.
- SMARTSTART QR CODE- Simplest possible device installation. Compatible with Zwave hub including Control4, Fibaro, SmartThings, Vera and more..
- Easy as plug and play. Start your smart home here. Z-Wave Plus certified. Certification number: ZC12-19080007.
Check Stock
Monoprice 700 Door/Window Sensor | Longer Wireless Range, Burglar Alert, Easy Installation, Ideal for Home, Garage, Apartment - Z-Wave Plus Series
- Easy Setup: Setup is as simple as scanning the QR code on the sensor with your smartphone, then following the step by step instructions..
- Powerful and Robust Security: The Z Wave Plus V2 Series 700 standard provides the highest level of security of any Z Wave standard. It supports Network Key, AES 128 bit encryption, ECDH key agreement protocol, Security 2 (S2), and SmartStart, which renders man in the middle hacking virtually impossible..
- Long Battery Life: The Z Wave Plus Series 700 standard delivers up to 50% longer battery life than previous Z Wave standards, allowing this sensor's battery to last for up to 10 years..
- Small and Compact: Measuring only 2.2" x 1.0" x 0.2" (56 x 26 x 6 mm), this is one of the smallest and most compact door/window sensors on the market..
- Longer Wireless Range: The Z Wave Plus Series 700 standard provides a wireless hop mode range of up to 800 meters (2,624 feet), more than 200 meters greater than the Series 500 standard..
Check StockEATON RF9617DW Z-Wave Plus Accessory Switch, White
- Z-Wave Plus devices can be controlled through voice assistants such as Amazon Alexa or Google Home when used with compatible Z-Wave controller/hub.
- Must be used with Z-Wave Plus Master Switch (RF9601).
- 3-Way control when used with Master Switch (RF9601).
Check Stock
HomeSeer HS-DS100+ Z-Wave Plus Door/Window Sensor
- 3 in 1 Zwave Sensor: Door and window sensor, temperature sensor and humidity sensor 3 in 1. Protect your home by detecting accidental opening/closing of doors, windows, cabinets and drawers. Check the battery level of the device, temperature and humidity through the app..
- Safe and Reliable: Built-in Z-Wave 700 series, Z-Wave Plus V2, faster wireless speed, longer battery life and longer range than Z-Wave 500 series. SmartStart included, with standard S2 security features, is not only easy to install (auto-recognition via a quick scan of a QR code), but also secure..
- Long-Life Battery: This smart sensor is powered by a CR2450 battery (battery included, no need to bring your own). The lifespan is 3 years. The sensor’s power saving mode extends battery life compared to other sensors..
- Customized Events: Personalize how your Z-Wave devices talk to each other: when the front door is opened in the evening, automatically turn on the welcome lights. When a backdoor is opened unexpectedly, trigger a Z-Wave alarm siren..
- Z-Wave Hub Compatibility: This z-wave door sensor works with certified Z-Wave gateways, Fibaro, SmartThings, Vera..
Check Stock
