Categories

Best Z Wave Window Sensors

Zooz 700 Series Z-Wave Plus S2 USB Stick ZST10 700, Great for DIY Smart Home (Use with Home Assistant or HomeSeer Software)

  • READ BEFORE YOU BUY: The Z-Wave stick is for advanced users only, NOT for beginners. You must be comfortable with programming and have expert computer and Z-Wave knowledge to use this device..
  • S2 SECURE NEW 700 SERIES Z-WAVE PLUS: Take advantage of the new 700 Series Z-Wave with more range and S2 authenticated security protocol. It means that you can fully benefit from your S2 sensors, switches, and plugs running on the latest Z-Wave chip..
  • WHAT YOU NEED: This S2 700 Series Stick adds Z-Wave Plus capability to your DIY smart home set-up. You'll need a dedicated computer (PC, laptop, or Raspberry Pi, sold separately) and home automation software of your choice (not included) to complete the system..
  • ADVANCED Z-WAVE: Works great with the most popular software like Home Assitant (with JS), Indigo, and HomeSeer. Supports OTA firmware updates (works with Aeotec OTA firmware tool) and and all of the latest Z-Wave library commands..
  • SMART START: Supports the new quick and extra secure Z-Wave pairing method. Just scan the QR codes from any SmartStart Z-Wave Plus accessories to your home automation interface and power them on. They'll join automatically. Make sure your smart home software supports this feature..
Check Stock

Aeotec Range Extender 7, Zwave Extender and Repeater (One Pack)

  • WIRELESS ZWAVE REPEATER- Amplifies and repeats weak signals boosting the range and reliability of weak Z-Wave / Z-wave Plus devices. 250% further wireless range.
  • 50% FASTER Z-WAVE COMMUNICATION- Built upon Aeotecs unique Gen7 hardware and firmware stack, stable performance, achieving seamless automation.
  • SECURITY 2 SYSTEM COMPATIBLE- This particularly means it can amplify and repeat signals from security focussed devices, including door locks and smoke sensors.
  • SMARTSTART QR CODE- Simplest possible device installation. Compatible with Zwave hub including Control4, Fibaro, SmartThings, Vera and more..
  • Easy as plug and play. Start your smart home here. Z-Wave Plus certified. Certification number: ZC12-19080007.
Check Stock

Aeotec Siren 6, Z-Wave Plus S2 Enabled Zwave Siren Safety Speaker, Wall-Mounted Sound & Light Security Intruder Zwave Alarm with Backup Battery, 110dB

  • Aeotec Zwave Siren 6 is your home smart indoor siren. Built with Z-Wave Plus S2 to be a smart home security siren, it features a 110dB speaker coupled with 1,000 lumens visual light alert strobe. Can be used as siren for security alarm, smoke sensor, and CO sensors via Z-Wave.
  • Pre-loaded 6 security sounds, 8 safety sounds, and 30 tones in total. Each tone is volume adjustable between 80dB and 110dB.
  • 4-hour backup battery lets Siren 6 work even when power is turned off.
  • Can also be used as doorbell by pairing with Aeotec Button. Can use up to 3 zwave buttons, each sold separately.
  • 5-Compatible with certified Z-Wave gateways including: Samsung SmartThings, HomeSeer, Open Z-Wave, Zipabox and more(Not compatible with Vera). Z-Wave Plus and Z-Wave S2 certified for quicker response time, better wireless range up to 490 feet in open space, and additional wireless security encryption. Z-Wave Plus certification number: ZC10-19046417..
Check Stock

Zwave Door Sensor Aeotec Recessed Door Sensor 7, Z-Wave Plus Enabled Smart Door Sensor Battery Powered, SmartStart S2, Zwave Hub Required SmartThings Fibaro Home Centre 3 Hubitat

  • Safer than the previous z-wave recessed sensor. Come with z wave security 2 (S2) framework which is the most advanced security for smart home zwave devices and controllers, z-wave gateway and zwave hub in the market today, it’s better to protect your family.
  • Anytime and anywhere, it’s great wireless door sensors for security. Smart hubs compatible with z-wave hub Samsung SmartThings, Wink, HomeSeer HS3, Hubitat, ISY994i, Open Z-Wave, Domoticz and more. Frequency: 908.40 MHz, 916.00 MHz.
  • Take your home under zwave controller. Open close sensor zwave Optimized to use up to 66% less battery power to communicate than previous generations. 3 year+ battery life powered by 1 x 1/2 AA battery. Battery included. Never worry about missing any important moment or running out of battery.
Check Stock

Sensative Z-Wave Plus Indoor/Outdoor Flood Prevention and Water Sensor Strips Drip Works with SmartThings

  • Ultra-thin Z-Wave Plus sensor notifies you when water leaks or freezing temperatures are detected.
  • Included temperature and light sensors monitor ambient temperature and light.
  • Communicates with Z-Wave devices up to 131 feet (40 meters).
  • Compatible with most Z-Wave controllers, plus Ring, Raspberry Pi and more.
Check Stock

Zooz Z-Wave Plus Q Sensor ZSE11 | Motion, Temperature, Humidity, Light (Hub Required)

  • 4 SMART SENSORS: Get motion alerts and monitor temperature, humidity, and light to take your smart home to the next level. Use this device as the trigger to lighting automations, security alerts, or climate control. It's as versatile and as quick to report as can be. Compatible Z-Wave hub required (sold separately)..
  • FLEXIBLE MOUNT: Use the included mounting bracket to adjust the sensor's field of view and ensure precise monitoring. Power the sensor with batteries (included) or a micro USB cable (sold separately). Always use a single power source only. Works as a Z-Wave repeater when included on USB power..
  • Z-WAVE COMPATIBILITY: Most basic Z-Wave systems aren't advanced enough to display multisensors correctly. The ZSE11 Q Sensor is supported by: SmartThings (with a custom handler, instructions included with the product), Hubitat, Home Assistant, Indigo, Vera, and HomeSeer. Please do NOT buy this device if your hub isn't listed here, it will not be recognized by your system..
  • MINIMAL DESIGN: Simple and modern look to compliment any interior. This sensor is small enough for discreet monitoring of your home, office, or warehouse space..
  • MORE SECURITY: Includes S2 Authenticated Z-Wave security and SmartStart for the safest communication possible. Back by a ....
Check Stock

Aeotec Multisensor 6 with Battery, Z-Wave Plus 6-in-1 Motion, Temperature, Humidity, Light, UV, Vibration Sensor

  • 6-in-1 Zwave MultiSensor: smart motion sensors, z wave humidity, temperature sensor, Zwave light sensor, lux, UV, vibration sensor..
  • Up to 2 year battery life with 2 batteries or power via USB. 1 x CR123A included in the box..
  • Super-small at 1.65 inches. Can be installed in corner, in-wall, on shelf or recessed in ceiling with Recessor accessory..
  • Works with certified Z-Wave gateways and tested with Fibaro, HomeSeer, Indigo 7, openHAB, SmartThings, and Vera..
  • Z-Wave Plus certified. Certification number: ZC10-15070011.
Check Stock

Zooz 700 Series Z-Wave Universal Relay ZEN17 for Awnings, Garage Doors, Sprinklers, and More | 2 NO-C-NC Relays (20A, 10A) | Signal Repeater | Hub Required (Compatible with SmartThings and Hubitat)

  • ... physical on/off control or use your Z-Wave hub (required, sold separately) for wireless control. Your smart speaker is NOT a Z-Wave hub. This product is NOT supported by Wink or Z-Wave alarm panels..
  • 2 SMART INPUTS: Monitor 12-24 V or dry contact inputs separately from the dry contact outputs. Connect analog binary sensors to receive status updates in your Z-Wave hub from a connected door sensor, water sensor, HVAC system, or alarm panel. Use the inputs to trigger the outputs automatically..
  • AUTOMATE ANYTHING: Add Z-Wave connectivity to up / down DC motors in screens, motorized blinds, or awnings. Perfect to automate your garage door opener (use a single ZEN17 to control up to 2 garage doors independently), commercial gates, gas fireplace, sprinklers, doorbell, outdoor lighting, pool pump, whole house fan, and any 1-240 V device up to 20 A..
  • QUICK INSTALLATION: Power it with a 12-24 V AC/DC power source or a standard USB C cable (included) and a power supply (sold separately). Wall-mount ready. Jumper wires NOT included. Do NOT power with 110 V!.
  • NEW 700 Z-WAVE: Enjoy better signal coverage and a stronger Z-Wave repeater for your mesh network with the latest 700 series chip. It comes with S2 authenticated security and SmartStart for easy pairing. R....
Check Stock

Aeotec Multisensor 6 & Ceiling Recessor, Z-Wave Plus 6-in-1 Motion, Temperature, Humidity, Light, UV, Vibration Sensor, Battery included

  • 6-in-1 Zwave MultiSensor: smart motion sensors, z wave humidity, temperature sensor, Zwave light sensor, lux, UV, vibration sensor..
  • Up to 2 year battery life with 2 batteries or power via USB. 1 x CR123A included in the box..
  • Super-small at 1.65 inches. Can be installed in corner, in-wall, on shelf or recessed in ceiling with provided Recessor accessory..
  • Works with certified Z-Wave gateways and tested with Fibaro, HomeSeer, Indigo 7, openHAB, SmartThings, and Vera..
  • Z-Wave Plus certified. Certification number: ZC10-15070011.
Check Stock

Zooz 700 Series Z-Wave Plus 4-in-1 Sensor ZSE40 (Motion / Light / Temperature / Humidity)

  • 4 SMART SENSORS IN 1: This compact device detects and reports motion, temperature, humidity, and light level to your smart home app. Compatible Z-Wave hub required, sold separately..
  • NEW 700 SERIES VERSION: The included CR123A battery makes the sensor lasts much longer than any previous version. Updated motion detection allows you to get even quicker activity reports. New Z-Wave chip for better performance..
  • CUSTOMIZE IT: Choose from 7 levels of motion sensitivity, adjust the motion clear delay time, and pick from 3 different LED indicator modes (your hub needs to support advanced parameter input)..
  • SECURITY FIRST: This sensor is equipped with the latest S2 authenticated security and signal encryption. It's Z-Wave Plus 2 certified to ensure it complies with the highest industry standards. Supports SmartStart inclusion with a unique identifying PIN and QR code..
  • WILL IT WORK WITH MY HUB? This sensor is NOT supported by Wink, Vivint, ADT Pulse, Qolsys, or other Z-Wave alarm panels. It will work great with open systems like Hubitat, HomeSeer, Home Assistant, and compatible with SmartThings Hub..
Check Stock

Sensative Z-Wave Plus Indoor/Outdoor Temperature and Light Sensor Strips Comfort Works with SmartThings

  • DISCREET TEMPERATURE MONITOR: Include these sensors to your Z-Wave network to check on the temperature inside or outside your home anytime, anywhere.....
  • LIGHT LEVEL REPORTS: Use Strips Comfort’s LUX readings which measure ambient light and create customized rules for your Z-Wave blinds and automated....
  • BLENDS RIGHT IN: Strips Comfort sensors are paper-white and extremely thin at only 0.2” so they mount almost invisibly. You can also paint over them....
  • USE THEM OUTSIDE: Strips Comfort are weatherproof and built to withstand rain, dust and temperatures as low as -4°F and as high as 140°F. Set it and....
  • STATE-OF-THE-ART TECHNOLOGY: You can depend on Sensative’s unique and innovative design utilizing the highest quality components, wrapped in a....
Check Stock

Qubino Z-Wave Plus Smart On/Off Thermostat 2 ZMNKID3 (Z-Wave Hub Required)

  • UNIQUE Z-WAVE: The Stelpro KI is the first Z-Wave thermostat in North America to work with line voltage, with a 2-wire connection to the heater..
  • EFFICIENT HEATING: Remotely control your baseboard and convector heaters from your mobile device or computer (when included to a Z-Wave gateway controller - sold separately)..
  • SAVE SMART: Set your own temperature schedules to reduce energy bills with minimal effort.
  • take advantage of the device's ECO mode, designed to be as energy-efficient as possible..
  • ELEVATED CLIMATE CONTROL: Create advanced automations by pairing the Stelpro KI with other Z-Wave devices. Trigger the heating on/off with a door/window sensor, temperature sensor, motion sensor, etc..
  • CERTIFIED QUALITY: This thermostat is Z-Wave Plus and UL certified. Made in Canada. Works with SmartThings, Vera, HomeSeer, Nexia and Wink..
Check Stock

NEO Z-Wave Plus Smart Light Switch 1 Gang 2 Switchs in-Wall Smart Switch Touch Panel Touch Sensitive Home Automation Remote Control, Work with Z-Wave Hub

  • ... off when you get home. The smart switch can control incandescent, resistive, fluorescent, and inductive lights. Only used indoor, NOT dimmer..
  • 【Z-WAVE TECHNOLOGY】 Z-Wave Plus Certified and integrates with most Z-Wave Certified hubs. Support multi-device controlled, can be working interactively with other Z-Wave sensors via the gateway..
  • 【Important Notes Before Buying】 1) Please double check the size of the switch and mounting bracket. The device is 1 gang and support 2 switches. 2) Please make sure there is a neutral wire in your switch box, which is required for installation. 3) Be sure the wiring is correct. Electric knowledge is required, otherwise please hire professional electrician..
Check Stock