Categories

Best Z axis Lead Screw Kit

TOPCHANCES 900mm Travel Length Linear Stage Actuator DIY CNC Router Parts X Y Z Linear Rail Guide Motion Slide Table Ball Screw Stage Actuator Sfu1605

  • Ball screw type: 1605 (diameter 16mm, lead 5mm (screw can be replaced by 1610/1620/2020/2005 C7 level).
  • Horizontal Load: 40KGS/Vertical Load: 15KGS/Speed: 1-50mm/s.
  • Stroke: 100mm/200mm/300mm/400mm/500mm/600mm/700mm/800mm/900mm/1000mm(optional).
  • Z-axis slide, with a stepper motor, 3 axis CNC engraving machine modification tool..
Check Stock

TOPCHANCES 600mm Travel Length Linear Stage Actuator DIY CNC Router Parts X Y Z Linear Rail Guide Motion Slide Table Ball Screw Stage Actuator Sfu1605

  • Ball screw type: 1605 (diameter 16mm, lead 5mm (screw can be replaced by 1610/1620/2020/2005 C7 level).
  • Horizontal Load: 40KGS/Vertical Load: 15KGS/Speed: 1-50mm/s.
  • Stroke: 100mm/200mm/300mm/400mm/500mm/600mm/700mm/800mm/900mm/1000mm(optional).
  • Z-axis slide, with a stepper motor, 3 axis CNC engraving machine modification tool..
Check Stock

Genmitsu CNC Machine 4040-PRO for Wood Acrylic MDF Nylon Carving Cutting, GRBL Control, 3 Axis CNC Router Machine, Working Area 400 x 400 x 78mm (15.7” x 15.7” x 3.1”)

  • An effective working area of 15.7” x 15.7” x 3.1” is large enough for most daily CNC projects. The redesigned Z-axis carriage makes swapping a spindle easier. Adding more screw holes on the non-all-in-one Z-axis carriage allows you to install the larger spindle higher for extra overfeed height..
  • New Steel HSS Frame - all new redesigned frame structure, each axis is composed of two 16mm Steel HSS linear tubes and a lead screw motion drive, dual Y axis rails, and all metal frame. This new high-rigidity structure ensures the stability and accuracy of the CNC machine..
  • Still based on open-source Grbl v1.1, the 4040-PRO CNC router has stepped up to more powerful but silent Toshiba TB6S109 drivers with 32-bit chips. Upgrades include extended function ports like a dedicated 3 Pin Laser Port, Air Assistance Pump Port, and MPG Port..
  • All main parts are pre-assembled and it just takes about 15 minutes to finish the whole machine assembly. The spoilboard is combined by two pieces of MDF boards. Each MDF board could be replaced individually. You don’t need to replace the whole spoilboard when a panel gets damaged..
Check Stock

DAEDALUS CNC Router Machine 3018 Max, 3 Axis, 200w Spindle, All Aluminum Frame

  • ★Pre-assembled module, all aluminum frame and spindle holder with the lead screws, guide rods..
  • ★Designed to use GRBL1.1 firmware, support PC control and offline control..
  • ★Offline controller, control without computer, a great convenience and a space saver..
  • ★Max travel of X/Y/Z Axis, 300 x 180 x 45 mm. Spindle, 200w, 12000RPM. T8 lead screw, 2mm pitch..
  • ★Good at cutting strong wood(oak, pine, poplar), acrylic,plastic,PCB and aluminum..
Check Stock

Official Creality Ender 5 Plus 3D Printer with BL Touch Auto-Leveling Dual Z-Axis Touch Screen and Glass Bed Large Printing Size 350x350x400mm

  • BLTouch Auto Bed Leveling Sensor: It can precisely measure the tilt of hot bed surface and offers Z axis leveling compensation. Saving your time and....
  • Equipped with Two Lead Screws on Z Axis: The hot bed was held stably on Z axis frames, no worry about bed wobbling and dropping, fewer points of....
  • Dual Y Axis Motors: Y axis dual shaft motor and down-shift Z axis, moving more smoothly, ensure high precision printing..
  • Easy to Assemble and Operate: Ender 5 Plus uses touch color screen for easy and quick operation. It comes with several partially assembled kits, very....
  • Extra Glass Plate: Add a tempered glass plate on the heated bed, which makes models are easier to be removed. It also makes the hot bed more flat and....
Check Stock

Creality 3D Original CR-10 Dual Z Axis Leading Screw Rod Upgrade Kit

  • It is specially for Creality CR-10, The printer will be much more stable if you add this kit..
  • There will be an assembly instruction for you after buying it.
  • This kit is the original replacement parts for Cr-10..
  • Super easy to install. Original Parts from Creality 3D Printer Factory which with high quality.
  • Creality Orginal CR-10 Dual Z Axis Leading Screw Rod Upgrade Kit.
Check Stock

Stay Home [Explicit]

  • ...nearly any material such as wood, metals, plastic and foam, so that you can craft anything you like. Projects made with our M2 include benches, signs, lamps, tables, and even a guitar!.
  • FULL KIT: M2 is a 3-Axis wall-mounted CNC cutting machine and comes with laser-cut, steel and powder coated mounting brackets, lead screw z-axis, built-in dust collection port, three ⅛‘’ router bits that offer extremely precise cuts. The router is not included. Compatible routers include: DeWalt611, Bosch Colt, Makita RT0700CX and EU equivalents to each of the above..
  • OPEN-SOURCE SOFTWARE: The M2 is designed to be used with Makerverse open-source software which is included with your purchase. Makerverse is a GRBL CNC control application that has custom controls made specifically for all Maker Made products: the Maslow, M2 and 300x. The application is derived from the open source CNCjs project and will continue to receive new features and updates from the Maker Made team..
  • PRECISION: Maker Made M2 has a highly accurate cutting with a variance of just 1mm. Every piece is purpose-built for accurate, consistent cutting performance. The M2 cuts up to 40% faster than Maslow CNC, its motor is cooler and more efficient, the router bit is smaller for better accuracy..
Check Stock

Mini Linear Lead Screw Nut Slider 2‑Phase 4‑Wire Stepper Motor Linear Screw Slide Table Slider Stroke 34mm

  • ID 5mm to 8mm, suitable for Nema 17 stepper motor and T8 lead screw.
  • Suitable for 3D printer or CNC machine Z axis.
Check Stock

Iverntech NEMA 17 Stepper Motor with Integrated Tr8x2 2mm Lead 310mm T8 Lead Screw for 3D Printers Z Axis or CNC Machine…

  • Iverntech NEMA 17 Stepper Motor with Integrated 310mm Tr8x2 Lead Screw.
  • High torque nema 17 stepper motor, 500mN.m, 42x42x48mm, 2 phase 4 wires.
  • Come with 1 set anti backlash nut and 1M (39.37") motor wire.
  • Great replacement for 3D Printers Z Axis, CNC Milling, Small Robotics, Stage Lighting, Laser Engraving.
Check Stock

EPAX E10 8.9 4K Mono LCD 3D Printer UV Photocuring LCD Resin 3D Printer with 8.9 Monochrome LCD 10.1 Parallel UV LED Light Source Build Volume 192x120x250mm

  • 【Fast Printing and Long Screen Life】E10 comes with a 8.9 inch monochrome LCD of 4K HD resolution and only takes 1.5 to 2.5 seconds per layer....
  • 【Larger build volume】E10 has a large printing volume of 192*120*250mm, and can dramatically improve your productivity..
  • 【High Quality Parts and High Precision Prints】High quality z axis and lead screw. Durable PolyCarbonate hood. High quality brand USB stick. Molded....
  • 【High Quality nFEP Film Used】Unique nFEP film leading to much smaller release force, quieter and much less stress on print. With nFEP, you can....
  • 【Warranty and Service】EPAX provides a 1-year USA warranty on the whole printer (LCD screen, nFEP film, and tool kit excluded). USA based Support....
Check Stock

FoxAlien Masuter Pro CNC Router Machine, Upgraded 3-Axis Engraving All-Metal Milling Machine for Wood Acrylic MDF Nylon Carving Cutting

  • Structure Upgrade: Masuter Pro is an All-Aluminum CNC router machine, which makes the machine sturdier than the last version. The Z-axis uses Linear Rail instead of rods and T8 lead screw, this greatly improves the stability and accuracy..
  • Upgraded Controller Box: The control board is upgraded to a compact controller box. The emergency stop button and home button are more easily and more convenient to access. The control box is also dust-proof for easy maintenance..
  • Compatibility Upgrade: Masuter Pro includes 2 spindle clamps: 52mm & 65mm. The 52mm clamp can accommodate the 60W spindle, 300W spindle and the FoxAlien 20W/40W modules. The 65mm clamp is for customized upgrade, such as 65mm router, 1.5KW spindle, etc. It also supports the 69mm spindle clamp, please buy separately..
  • Assembly Upgrade: Main parts are pre-assembled, and the part of the wires are pre-wired to the controller box. It takes only 10-15 minutes to fully assemble..
  • Large Engraving Area: The active working area is 15.75” x 15.75” x 2.36” (400 x 400 x 60mm). It is large enough for daily woodworking. It supports extension kit to enlarge the working area.
  • and the extension kit will be available soon!.
Check Stock

300mm 8mm T8 Lead Screw Set Lead Screw+ Copper Nut + Coupler+Hexagon Wrench + Pillow Bearing Block for 3D Printer

  • Lead Screw Set, compact, large load carrying capability, rustproof and long service life..
  • Precise and accurate linear motion, large mechanical advantage..
  • T8 brass nut, with 4 holes for fixing to the machine..
  • Smooth, quiet, low friction,and low maintenance, very suitable for 3D printer z axis..
  • Widely used in 3D Printer, stepper motor, machine tools, and other equipment..
Check Stock

Official Creality Ender 3 Max Neo 3D Printer Upgrade Large Size FDM 3D Printers with CR Touch Auto Leveling Bed Filament Sensor Z-axis Double Screw Printing Size 302x300x320 mm

  • 【CR Touch Auto Bed Leveling】The CR Touch intelligent leveling system can automatically compensate the printing height at different points of the....
  • 【Power Loss Recovery and Filament Sensor】The Creality 3D Printers features the function of detecting filament runout or breakage/power loss and....
  • 【High-precision Dual Z-Axis Higher Printing Precision】With a Z-axis dual-screw+Z-axis dual-motor design, works smoother and more synchronously to....
  • 【Simple Quick Assembling 】96% of the printer body is pre-installed, making assemblingextremely convenient with only 3 steps and the maintenanceof....
  • 【12-months Parts Repair】Creality 3D printers are provided lifetime technical assistance and 12-months Parts Repair..
Check Stock