Categories

Best Z probe Sensors

Duet 3 Mini 5+ WiFi 3D Printer Controller

  • Powerful 32 Bit Processor (ARM Cortex M4 @120Mhz).
  • Dedicated High speed bus to a single board computer (e.g. Raspberry Pi) for the user interface and plugins.
  • 5 Trinamic 2209 stepper drivers running at up to 1.4A RMS, 2A peak with firmware control of the full feature set including up to 256 microstepping,....
  • All common 3D printer geometries are supported.
  • Support for a wide range of Z probes including DC42’s IR Z probe and the Duet3D Smart Effector for delta printers.
Check Stock

Deyooxi Smart Meat Thermometer with Bluetooth – Digital Cooking Thermometer with Ultra-Thin Probe for Remote Monitoring of Kitchen, BBQ, Smoker, Rotisserie, Grill

  • 【Completely wireless】The Deyooxi Smart Thermometer monitors temperature throughout cooking — no strings (or wires) attached. Advanced internal sensors accurately track cooking progress and send voice and app alerts when your food needs to be flipped, moved, or pulled from the heat. Monitor your cook using the FREE app available for iOS (10.3 and later) smart phones and tablets..
  • 【1 Probe, 2 Sensors】The meat thermometer contains 2 sensors.
  • one to measure the meat’s temp, and the other to measure the oven/pit’s temp. The internal sensor can display and withstand up to 212ºF (100ºC) and the ceramic handle sensor can display and withstand up to 572°F (300°C)..
  • 【Rechargeable & Waterproof】The wireless clinical thermometer includes a power cord. It can be fully charged in 5-10 minutes and can work for about 4 hours. Connect the power cord to any power adapter. When the indicator light is red, the probe is charging, the indicator light turns green, and the probe of the Bluetooth meat thermometer is fully charged. You need to reconnect after each charge. Wireless meat probe features IP67-rated stainless steel that is easy to clean, allowing you to always keep your space tidy, dishwasher-safe.
  • 【Assisted cooking System】The meat thermomete....
Check Stock

Fluke TLK282 SureGrip Deluxe Automotive Test Lead Kit

  • Kit includes insulation piercing clip set, automotive back probe pins (5), Suregrip silicone test lead set, Suregrip test probe set.
  • Also includes SureGrip alligator clip set, SureGrip large jaw alligator clip set, SureGrip hook clip set, soft case.
  • Use the back probe pins to slide into weather pack connectors on fuel injectors, TPS and Map sensors.
  • A hook probe with plunger actuation allows quick connection to pins or exposed conductors.
Check Stock

Replacement for Pit Boss Temperature Probe 2 Pack Pellet Grills Meat Probes & Smokers Parts BBQ Accessories Waterproof 3.5mm Plug with 2 Stainless Steel Probe Clip Holders

  • Replacement for Pit Boss Meat Probe: Compatible with Pit Boss Pellet Grills and Pellet Smokers with digital control meat probe capability. For use....
  • Features of the Meat Probe: We use a 3-layer compression interface (stainless steel cable and probe connection location) to make our probes more....
  • Professional Manufacturer: We have 20 years of experience in the BBQ meat thermometer probes and meat probe，providing temperature sensors or probes....
  • Meat Probe Parameters: Stainless steel cable is 4.1 feet (1250mm) long. The probe is 7 inches (178 mm) long and has a probe tip to R angle of 6 inches....
  • Package Contents: 1Pack Meat Probe, 1Pack 3 in 1 grill clip(aperture 0.12inch / 3mm , 0.16 inch / 4mm, 0.2inch / 5mm), 1 anti-static bag and 1 Color....
Check Stock

HomeSeer HS-FLS100 Z-Wave Plus Floodlight Sensor GEN 2

  • AUTOMATIC AND REMOTE CONTROL: Controls floodlights automtically when motion is sensed or remotely with Z-Wave commands..
  • MULTIPLE SENSORS: Built-in motion, temperature and light (LUX) level sensors report back to the hub..
  • EASY TO INSTALL: Works with standard floodlight fixtures and 120v incandescent & LED flood light bulbs..
  • COMPATIBILITY: Works with most Z-Wave hubs. Device handler avaialble for SmartThings new app users..
  • LATEST TECH: Includes Z-Wave Plus technology and S2 encryption for best performance and security..
Check Stock

Goupchn Wire Piercing Probes Set 20PCS Insulation Back Probes Non-Destructive Pin for Automotive Diagnostic Car Repairing Electrical Testing

  • Back probes are made of stainless steel which have strong conductivity. The shell is made of insulating and flame-retardant material which ensures....
  • The tip of the probe is only 0.7mm, which can easily pierce wires without damage. The tail is 4mm banana female socket. It is convenient to connect....
  • Perfect for wire piercing, back-probing harness connectors, automotive sensors, diagnostic troubleshooting. No need to strip off the cables and no....
  • Package include: 15PCS Back Probes + 5PCS Test Probes with Caps. 1PC White Storage Box. 20PCS wire piercing probes are enough for your daily use..
  • Warranty: Hope you can be satisfied with our back probes. We provide guarantee of a 30-day replacement or refund for any problem and 1 year warranty.....
Check Stock

Replacement Meat Probe for Pit Boss Pellet Grills and Pellet Smokers. 3.5mm Plug Compatible with Pit Boss Accessories Meat Probe. 2 Packs Meat Probes and 2 Packs Grill Clips.…

  • ...rade stainless steel. Monitor meat temperature or grill temperature. The buck probe design provides accurate, fast temperature sensing and alerts you to temperature changes in seconds..
  • Professional Manufacturer: We have 20 years of experience in the BBQ meat thermometer probes and meat probe，providing temperature sensors or probes for most of the world's leading thermometer brands. Please note: Our thermometer probes only support the listed models. If you accidentally bought the wrong probe, please contact us to replace or provide a refund service. In order to extend the life of the temperature probe, we recommend that you clean it with a rag after use..
  • Meat Probe Parameters: Stainless steel cable is 4.1 feet (1250mm) long. The probe is 7 inches (178 mm) long and has a probe tip to R angle of 6 inches (153 mm), a probe diameter of 0.2 inches (5 mm), and a probe tip of 0.4 inches (10 mm). The plug has a diameter of 3.5mm (0.14inches) and a length of 0.55inches (14mm). The probe is bent (R 25°). The probe can withstand temperatures up to 1000°F (500°C), the stainless steel cable can withstand temperatures up to 718℉（380℃）..
  • Package Contents: 2Packs Meat Probe, 2Packs 3 in 1 grill clip(aperture 0.12inch / 3mm , 0.16 inch / 4mm, 0.2inch / 5mm....
Check Stock

Wireless Z-Wave Multi-Input/Output Dry Contact Bridge Cert ID ZC08-16040002

  • BEFORE YOU BUY: Check to make sure your home automation controller / security panel is interoperable with our device. NOT ALL Z-wave Controllers are....
  • One 24VDC / 110 VAC Relay to control any low voltage device via Z-wave. Controls garage doors, motorized shades, gates, solenoid valves, etc. Relay....
  • One SIGNAL Input terminal block to receive low voltage (digital, analog, or pulse) signals via Z-wave. Use with reed sensors, contact sensors, door....
  • 9V AC power adaptor included. Low voltage wire is NOT included.
  • Please visit our website and youtube page for application details and how-to video's. Wiring diagrams are also downloadable on our website product....
Check Stock

Power Probe III w/Case & Acc - Green PP319FTCGRN [Car Automotive Diagnostic Test Tool Digital Volt Meter ACDC Current Resistance Circuit Tester]

  • MASTER KIT: The Power Probe 4 Master Combo Kit combines the Power Probe 4, PPECT3000 and various accessories to provide the ultimate combination of....
  • TEST A VARIETY OF CAR PARTS: The Power Probe 4 provides simplified testing of Motors, Lights, Relays, and Sensors, and even Fuel Injectors..
  • PROVIDES 12-24V POWER TO CAR COMPONENTS: Like all Power Probe circuit-testers, it supplies 12-24V Power and Ground for functional component testing on....
  • CIRCUIT TESTER: PPECT3000 will help you trace short and open circuits quickly and accurately.
  • CONVENIENT CARRYING CASE: The Power Probe 4 comes in a convenient carrying case that fits all included accessories for easy portability..
Check Stock

Govee Water Detectors 5 Pack, 100dB Adjustable Audio Alarm Sensor Bundle with Govee WiFi Water Sensor, 100dB Adjustable Audio Alarm

  • Adjustable Alarm Audio: Each water leak detector features an 0-100 dB adjustable alarm audio. Loud enough to be heard even if leak happens in basement, press the button to mute the sound when you find the leaking place..
  • Drip and Leak Alerts: Water sensor comes with 2 groups of back water detector probes & 1 group of front probes for pipe dripping detection. Use the App to name each sensor with its location..
  • Real-time Alerts: Connect the gateway to WiFi, and it will instantly send emails, App notifications & alerts to your phone when water leakage occurs even you're not at home. Water sensors and gateway are paired right out of the box. Note: only support 2.4G WiFi, not support 5G WiFi..
  • Connects to Multiple Sensors: WiFi connection gateway has a stronger and more stable signal transmission & lets you connect with multiple sensors simultaneously (10 max). Remember to upgrade your latest firmware on Govee Home App when updates become available..
  • IP66 Waterproof: The completely sealed waterproof design allows for extended use in high moisture areas..
Check Stock

Govee WiFi Water Sensor, 100dB Adjustable Audio Alarm and Smart App Alerts, Leak and Drip Alert with Email, Detector for Home, Basement(Not Support 5G WiFi)

  • Real-time Alerts: Connect the gateway to WiFi, and it will instantly send emails, App notifications & alerts to your phone when water leakage occurs even you're not at home. Water sensors and gateway are paired right out of the box. Note: only support 2.4G WiFi, not support 5G WiFi..
  • Loud Alarm with Mute: If WiFi is not temporarily available, our 100dB alarm is loud enough to be heard. Press the Mute button to silence the alarm when you find the leak..
  • Drip and Leak Alerts: Water sensor comes with 2 groups of back water detector probes & 1 group of front probes for pipe dripping detection. Use the App to name each sensor with its location..
  • Connects to Multiple Sensors: WiFi connection gateway has a stronger and more stable signal transmission & lets you connect with multiple sensors simultaneously (10 max). Remember to upgrade your latest firmware on Govee Home App when updates become available..
  • IP66 Waterproof : The completely sealed IP66 waterproof design allows for extended use in high moisture areas..
Check Stock

Maverick XR-50 Extended Range Digital Remote Wireless 4 Probe BBQ & Meat Thermometer from SnS Grills

  • EASY TO USE: PRO Series XR-50 - So Easy to Use! After a few minutes you’ll understand how to program all features. Includes zonoz Z-Cloth.
  • 4 TEMPERATURE PROBES, GREAT FLEXIBILITY: The PRO Series XR-50 has 4 WATERPROOF probes that measure meat or BBQ. Hi/lo alarms can be set between 14-574....
  • SUPER LONG 500 FT RANGE: With 500 ft range line of sight the XR-50 breaks records! MUCH better range than the typical 150-300 ft. Use any probe for....
  • EXTRA LARGE EASY TO READ LED DISPLAYS with backlight. LCD with backlight shows ALL information for each probe. All controls on transmitter.
  • Power source type: Battery Powered - New INSTA-SYNC operating technology: Faster connection and reduced connection drops..
Check Stock

Rösle 96016 Stainless Steel Probe for core Temperature Meter, Type Number 25086

  • Replacement probe for Rösle core temperature meter..
  • Probe with two sensors for core and ambient temperature..
  • Can be used in the oven and on the grill..Measuring range from -20°C to + 250°C..
Check Stock