Weiler 68321 Tiger AO Type 18 Flat Tip Portable Grinding Plug, A24-R, 1 1/2\ X 3\ X 5/8-11
- Aluminum oxide grains provide an even, sharp, clean cut-rate and consistent performance..
- Strong resin bond delivers a long cutting life..
- Open face design provides an aggressive cut-rate right out of the box..
- Anchored hexagon nut secures the abrasive to the tool to increase safety and prevent product breakage..
- Zinc plated nut prevents oxidation, eliminating contamination and allowing for easy mounting..
Check StockWeiler 68327 Tiger AO Type 18R Round Tip Portable Grinding Plug, A24-R, 1 1/2\ X 3\ X 5/8-11
- Aluminum oxide grains provide an even, sharp, clean cut-rate and consistent performance..
- Strong resin bond delivers a long cutting life..
- Open face design provides an aggressive cut-rate right out of the box..
- Anchored hexagon nut secures the abrasive to the tool to increase safety and prevent product breakage..
- Zinc plated nut prevents oxidation, eliminating contamination and allowing for easy mounting..
Check StockWeiler 68303 Tiger AO Type 16 Round Tip Portable Grinding Cone, A24-R, 1 1/2\ X 2 1/2\ X 5/8-11
- Aluminum oxide grains provide an even, sharp, clean cut-rate and consistent performance..
- Strong resin bond delivers a long cutting life..
- Open face design provides an aggressive cut-rate right out of the box..
- Anchored hexagon nut secures the abrasive to the tool to increase safety and prevent product breakage..
- Zinc plated nut prevents oxidation, eliminating contamination and allowing for easy mounting..
Check StockLansky 4-Rod Turn Box LCD5D
- WHITE CERAMIC: Only diamonds are harder than the Shenzhen white ceramic knife sharpeners.
- the ceramic alumina is rust resistant, stronger than....
- HONE AND SHARPEN: Our rods have a slightly abrasive 1000 grit rating for realigning the knife edge.
- sweep your chosen blade along the rod to hone the....
- RECTANGULAR BLADE GUARD: The wide nylon handle fits comfortably into your hand and the rectangular blade guard is reinforced with zinc alloy to....
- PROFESSIONAL USE: The 12-inch sharpener is long enough for professional use.
- easily hone and straighten any stainless steel knife in your kitchen....
- HAND WASH ONLY: Remove gray streaks and buildup by hand washing the sharpening rod with mild dish soap and a sponge.
Check StockWeiler 68312 Tiger AO Type 16 Round Tip Portable Grinding Cone, A24-R, 2 3/4" X 3 1/2" X 5/8-11(Pack of 12)
- Aluminum oxide grains provide an even, sharp, clean cut-rate and consistent performance..
- Strong resin bond delivers a long cutting life..
- Open face design provides an aggressive cut-rate right out of the box..
- Anchored hexagon nut secures the abrasive to the tool to increase safety and prevent product breakage..
- Zinc plated nut prevents oxidation and allowing for easy mounting..
Check StockKonjac Body Sponge (2 Pack) | 100% Natural & Dye Free | Non-Toxic | Biodegradable | Eco-Friendly | Plastic Free Packaging
- ..., & E, proteins, lipids, fatty acids and natural minerals such as copper, zinc, iron and magnesium. It also helps balance the skins natural pH level..
- GENTLE Massaging for Sensitive Skin: Our Earth Beauty konjac body sponges are SOFT to help cleanse and clean skin, leaving it bright and smooth without being harsh or abrasive. Ideal for sensitive, acne-prone, oily, or dry skin. Perfect at the end of facial routines to help remove the last bits of makeup and oil while replenishing the nutrients your skin needs..
- HIGHEST QUALITY GUARANTEE: Our Earth Beauty offers the highest quality, eco-friendly konjac body sponges on Amazon. If you are unhappy with your order or any reason, please let us know. Your satisfaction is guaranteed..
Check StockHigh Pressure Oil Pump HPOP Hoses Lines Kit & Crossover Line Fit for Ford 1999-2003 7.3L Compatible with Powerstroke
- COMPATIBILITY: Fits for Ford 1999, 2000, 2001, 2002 and 2003 compatible with Powerstroke 7.3L engines, also fit all 99-up E-series & Excursion with 7.3 engines..
- MATERIAL: Forged steel (clear zinc plated) is applied to provide effective abrasive resistance and anti-aging, does not wear and leak over time..
- FEATURE: Sensitive to high pressure and temperature. 4800 psi working pressure, 23200 psi minimum burst pressure, -50°F to 260+°F temperature rating..
- FUNCTION: Reduce conflicts with fuel systems, turbos, elec harnesses and etc. Heat shield specs-1100°F Continuous protection, 2000°F Intermittent protection.
- INSTALLTION: Easy to install. 45 deg ORB-JIC fitting saves you about an 1/2" of installed height vs the factory 90 deg STC fittings..
Check StockDEWALT DW3511 7-Inch X 1/8-Inch Metal Abrasive Blade,Black
- Aluminum oxide grain for long life and fast cutting.
- Diamond knockout arbor for use with worm drive saws.
- Proprietary material mix ensures durable long life wheels.
Check Stockuxcell Metric Machine Tap M12X1.25mm H2 HSS Uncoated 4 Straight Flutes Thread Tapping DIY Tool 2pcs
- Thread Size: M12X1.25mm. High-speed steel taps are with high hardness and toughness for wear resistance, well suited for general purpose applications..
- Can make new threads or re-thread damaged or jammed threads. Uncoated taps feature just the base substrate without any additional coatings, and fit a wide range of applications..
- Suitable for most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Appropriate addition of coolant (e.g., water) can extend the service life when tapping..
- Standard metric thread design, clear and tidy, provide rapid chip removal for efficient threading..
- The taper taps can be applied for threading machine and electric drills, use to cut thread inside hole, creating a female surface which functions like a nut..
Check StockHegebeck Thread Milling 3/8-16 Thread Taps Extrusion Taps H2 Thread Drill Thread Milling Plug for Manual Equipment Special Processing Consoles 1 Pcs
- Thread Size: M4 x 0.7mm. High-speed steel taps are with high hardness and toughness for wear resistance, well suited for general purpose applications..
- Can make new threads or re-thread damaged or jammed threads. Ti-coated taps provide capability, durability and long service life. Fits a wide range of applications..
- Suitable for most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Appropriate addition of coolant (e.g., water) can extend the service life when tapping..
- Standard metric thread design, clear and tidy, provide rapid chip removal for efficient threading..
- The mini metric taps are mainly used for clocks, watches, low hardness wood and soft metal hole processing..
Check Stock3M Hookit Clean Sanding Pad 20435, 3 in x 4 in x 1/2 in 33 Holes Red Foam
- Medium density backup pad for abrasive sheets on 3M Orbital Sander.
- Proprietary multi-hole pattern in pad helps evacuate dust, keep abrasive clean.
- Use with central vacuum and self-generating vacuum style orbital sanders.
- Dust evacuation extends abrasive life, improves abrasive performance.
Check Stock
Work Sharp Guided Field Sharpener
- Sharepn Chisels, lathe tools, plane irons, spoke shavesm and carvinge tools to razor sharp edges. The WS3000 uses a true flat glass wheel for incredibly sharp tools and perfectly flat backs. Includes (2) glass wheels, (1) slotted Edge-Vision wheel, (2) P120 abrasive discs, (4) P400 abrasive discs, (4) P1000 abrasive discs, (1) 3600 abrasive disc, (1) P80 slotted abrasive discs, (2) P400 slotted abrasive discs, (2) P1200 slotted abrasive discs, (1) tool rest, (1) crepe stick..
- No jigs required - sharpening port has precise and repeatable bevel angle settings of 20°, 25°, 30° and 35° for chisels and plane irons up to 2" Wide. Achieve a perfect 5° micro-bevel for fast re-honing..
- Powerful 1/5 HP motor - with 580 rpm speed has routed air flow and a heat sink cooling system to sharpen blades fast without blade damaging heat. This low-rpm wheel maintains speed regardless of load for improved consistency, so whether your specialty is custom furniture, cabinetry, or old-fashioned wooden toys.
- Accessories available - you can attach a wide variety of standard six-inch, adhesive-backed abrasive disks to these wheels, making it easy to select the grit you need for rough grinding or fine honing. And with two glass wheels, you can always have four different....
Check Stock2pcs O Ring Sandblasting Gloves Holder Sandblast Cabinet Parts Sand Blast Accessories for Sandblasting Machine
- For use with most Skat Blast Vacuum Systems. Collects 30-40% of reusable abrasive, and extends vac bag/filter and motor life!.
- Skat Blast Vacuum Abrasive Reclaimer mounts in-line between your abrasive blast cabinet and vacuum..
- During use, reclaimer instantly starts collecting and separating sharp, reusable abrasive. Broken-down, powderized abrasive travels through reclaimer and into vacuum where it is collected and can later be disposed of. Sharp, reclaimed abrasive stays in reclaimer and can be drained into a bucket and poured back into your cabinet for reuse..
- Fits model 780, 780-TL, 800-T, SC-33, SC-33V (requires closing latch on 780-TL, 800-T, SC-33 & SC-33V lid to be relocated), SC-35V, SC-45V, SC-28, SC-28V, 850, 850-T, SC-34, SC-40, 940-DLX, 930, 935, 950, 951, 952, SC-46, 960, 960-DLX, 960-T, 960-SE, SC-58, 970, and 970-DLX cabinets..
Check Stock
