Best Zinc Coated Coil
Solary Induction Essential Coil Kit, 9Pcs Magnetic Induction Heater Coils for Rusty Bolt and Nut Removal
- 【Improve Durability】 This induction coil kit, reinforced heat stabilized thermoplastic housing provides for increased durability inside and out..
- 【Safety】These coils are insulated for your protection and also coated to resist abrasion, to ensure your safety, if the insulating layer is damaged, a new coil needs to be used..
- 【Reusable】 Each coil can resist overheating and premature wear,they are all durable enough to be used at least several hundred times..
- 【Prevent Oxidation】 All coils are coated to eliminate oxidation and guarantee contact, so that it can provide maximum working efficiency..
- 【Application】The induction heater coil used to remove rusty bolts, nuts, bearings and gears ect, easily and efficiently..
Check StockMophorn Rebar Tie Wire Coil 10 Rolls, Rebar Tie Tool 0.8mm Diameter, Rebar Tying Wire 110m Length, Rebar Wire for Automatic Rebar Tying Machine Supplies
- Premium Material: This rebar wire is made of high-quality low carbon steel. Through an elaborate process of drawing molding, acid pickling, high-temperature annealing, hot galvanizing, and cooling, the coated zinc layer is thick and corrosion-resistant..
- Sustainable Lifecycle: The reusable wire spool is thickened and reinforced, which is not easy to crack the coil, and avoids the problem of getting rebar wire entangled.
- the high-strength axle is uneasy to be damaged and has a longer service life..
- Easy to Use: With good toughness and elasticity, it does not crack after repeated bending, which is easy to be shaped.
- the wire coil is firmly bound, light in weight, convenient for transportation, and does not occupy space.
- the rebar wire is finely polished with advanced technology, and the burr-free surface does not hurt hands..
- Wide Application: Whenever you're thinking of tying wire, you will find it set a must-have for your work with various features. It is best for woven wire mesh, handicrafts, gardening, product packaging, and other fields..
Check StockDiamond Audio MP694 6 X 9 PRO Full-Range Co-Ax Horn Speaker
- Ferrite Strontium High Temp Magnet structure.
- 1.5” 4 Ohm – Single Layer High Temp Voice Coil with Black Coated Voice Coil former for Woofer.
- 1.0” 8 Ohm – Single Layer High Temp Voice Coil for Tweeter.
- Advanced Voice Coil Heat Sink Design for Better Heat Dissipation.
Check StockCERWIN VEGA PH694 6″ x 9″ 160W RMS/320W MAX PRO Full-Range Co-Ax Horn Speaker
- Ferrite Strontium High Temp Magnet Structure.
- 12dB 2nd Order Filter Crossover for better Protection of the Tweeter.
- Advanced Voice Coil Heat Sink Design for better Heat Dissipation.
- 1.5” Double Layer High Temp Voice Coil with Black Coated Voice Coil former for Woofer.
- 1.0” Single Layer High Temp Voice Coil with Voice Coil former for Tweeter.
Check StockWestern Steel & Wire #16 Galvanized Tie Wire, 3.5 lb Coil
- Zinc coating for protection against rust and corrosion.
- Premium, oil free, wire made from BOF steelmaking.
- Manufactured and distributed by Western Steel & Wire.
Check StockColeman - 40 Amp 1 Pole 24v Coil Replacement Contactor C140A
- BUNDLE CONTENT: 5 ITEMS – Two (2) 40A 4 Pole Normally Open (NO) Contactors with power status indicator.
- one (1) compatible Slotted Steel Zinc Plated....
- CONTACTOR APPLICATIONS – Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters.
- COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
- Coil load Inrush 52VA, Sealed 10VA. Inductive/Motor Load: 40Amp,....
- OTHER CONTACTOR DETAILS – Contactor type NO with 4 poles, power status indicator. IEC AC Rate: AC-1.
- DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specifications adopted by European....
Check StockMB Quart NW1-254W Nautic Marine Subwoofer (White) - 10 Inch Subwoofer, Marine Certified
- ...t Shallow Marine Subwoofer, RMS Power Handling: 300 Watts, Peak Power Handling: 600 Watts, Minimum Impedance: 4 Ohms, Sensitivity: 82 dB, Mounting Diameter: 9.05" inches, Outside Diameter: 10.72" inches, Mounting Depth: 2.83" inches, Mounting Height with Grill & Gasket: 4.65" inches.
- Certifications: IPX67, Conformal Coated, UVA Certified, CEA426B, Marine Certified: IP67 Rating. Longer life against harsh conditions. Protected against sun fade with UVA paint coating. Conformal coated crossover components protect against fresh and salt water spray as well as dust and sand, Shallow Mount/Low Profile: Designed to fit in less than 3" of depth. Ideal for sealed enclosures.
- Water Resistant Spider: Woven red aramid fiber composite spider to stabilize the cone and voice coil in all musical situations. Armid fibers do not degrade over time and are not susceptible to temperature swings, 10" Composite Injection Molded Poly Cone: UVA Protected, water resistant composite polypropylene cone with NBR rubber surround mounted on a lightweight Fiber Reinforced Composite Frame.
- High Temperature Voice Coil and Former: Voice coil is high temperature copper, wound on a Kapton former which allows the voice coil to handle more power while remaining light in weight.
Check StockDiamond Audio MP654 6.5 PRO Full-Range Co-Ax Horn Speaker
- 1.5” 4 Ohm – Single Layer High Temp Voice Coil with Black Coated Voice Coil former for Woofer.
- 1.0” 8 Ohm – Single Layer High Temp Voice Coil for Tweeter.
Check StockBoatBuckle Pro Series Kwik-Lok Gunwale Tie-Down (2-Inch x 13-Feet, Black)
- Each buckle has 1,200-pound breaking strength and 400 pounds safe working load.
- Vinyl-coated top hooks and zinc-coated trailer hooks.
- Interactive retail packaging doubles as a storage case.
- Zinc coated steel trailer hooks and vinyl coated steel top hooks resist cracking and peeling.
Check StockHi-Lift Jack UTV-364 36' UTV Jack
- The Hi-Lift Jack 36 inch UTV Jack is a crafted with the same high quality components as standard Hi-Lift jacks, sized and equipped for use with UTVs..
- Unique gold zinc-coated winch/clamp/spreader attachment.
- Black powder-coated jack and handle with gold zinc-coated hardware.
- Two piece handle and socket is durable and reliable.
- Safe use information stickers, including rated load details and operating instructions, affixed to handle.
Check StockTreeWorks Chimes Percussion Effect (TREcoil)
- THE SPRING THAT SINGS | Simply use the included stainless steel beater to achieve an array of metallic effects including a finger cymbal ding, a dark metallic coil hit, and a long scrape of the coil. Playing only takes one hand, so it's easy to mute or stretch the coil for even more sound manipulation..
- PROUDLY MADE IN THE USA | The TREcoil is made from a 1/4" rod of solid Aluminum/Titanium alloy that is hand-bent and tested by ear in our workshop just north of Nashville, TN..
- FORGED FOR SUPERIOR STRENGTH AND SOUND QUALITY | Each coil undergoes high temperature heat treating to harden the metal and to add depth to its sound. The mantle secures the coil in place with a super durable polyurethane coated braided steel cord to keep your triangles hanging year after year..
- A SAFE AND CONVENIENT MOUNT | The coil is removable and interchangable with other hanging instruments, making this an invaluable addition to your percussion section. The included stainless steel beater slides easily into a hole drilled in the top of the mantle for storage between uses..
- DIMENSIONS | The TREcoil is 5" in diameter and 19" inches in length and comes with one Light Triangle Beater (TREbtr-LTE) that is 8 1/4 x 3/8 x 1/4 inches in dimension..
Check StockBoatBuckle Pro Series Kwik-Lok Transom Tie-Down (2-Inch x 4-Feet, Black), Pack of 2
- Each buckle has 1,200-pound breaking strength and 400 pounds safe working load.
- Vinyl-coated top hooks and zinc-coated trailer hooks.
- Interactive retail packaging doubles as a storage case.
- Zinc coated steel trailer hooks and vinyl coated steel top hooks resist cracking and peeling.
Check StockJWGUTS Induction Heater with 10 Pieces Coils 1000W 110V Magnetic Automotive Flameless Heating Handheld Bolt Removal Rusty Screw Removing Tool
- 8-PIECE COIL KIT: Includes 8 of the most used smaller diameter coils of varying lengths for removing stuck fasteners and fit a variety of applications..
- LONG-LASTING LIFESPAN: Each coil lasts for several hundred uses or more subject to use – avoiding abrasion and overheating prevents premature wear to the coil..
- INSULATED FOR SAFETY: Each coil insulation is coated to resist abrasion but, if insulation is breached, a new coil will need to be used..
- FLEXIBLE COILS: The coils are all flexible and can be bent or separated for a variety of applications. To use around corners or buried deep near plastic or rubber, simply bend to your desired configuration..
- PLATED AND PROTECTED: All coils are plated to eliminate oxidation and guarantee contact..
Check Stock