NATGAI 4 Pack Metal Lock Barrel Bolt Spring Loaded Locking Latch 6.5\ Long w/Grip Heavy Duty for Gate Shed Door Tailgate Trailer Garage (4 Pack)

  • 【Specification】: 6.5 Inch long spring bolt - 0.5" diameter round bolt - mounting plate: 1-9/16 inch by 3 inch.
  • 【Heavy Duty】: Constructed of heavy duty metal.
  • zinc coated for rust protection, red handle cover for easy pulling and turning, ultra-durable and corrosion resistant, perfect for indoor and outdoor applications..
  • 【Quick Release】: This spring bolt can lock in the open position, making your life easier. Simply pull back the bolt and rotate in place against the retaining pins - the tension from the spring will hold the latch open. Once you are ready to lock up, simply rotate the handle and the pin will automatically release..
  • 【4 Mounting Holes】: Each unit comes with 4 mounting holes pre drilled for the quickest installation. These mounting holes are countersunk for a flush finish with screws and a semi recessed finish if bolting in place. (Fasteners not supplied).
  • 【Package Included】: 4 x Spring-loaded barrel latches.
Check Stock

36 Trailer Swing Door Hinged Cam Bar Lock Hasp Latch Handle Utility Cargo

  • (1) 45" Trailer Door Zinc Cam Bar Lock Kit....
  • Includes: 45" Zinc Hinged Bar, Handle and Hasp....
  • Mounting Holes are Approx. 37" Inside Holes center to center and 43 1/2" Outside Holes center to center... Hinge Plates Are Approx. 36" Apart , Hinge....
  • Hinge Mounting Bolt Holes Are Approx. 3 1/4" Center to Center... Bolts and Fasteners are NOT INCLUDED....
  • Handle Is Approx. 14" Long... Handle Locking Hasp Receiver Is Approx. 5" by 2"... This Item Only Ships Within The 48 US States....
Check Stock

Steel Bolt-In Battery Mounting Box Tray

  • Relocate the battery from tight locations to where you have more room, or to improve weight distribution with a secure and economical bolt-in solution.
  • Will hold a battery up to 10-5/8" x 7-1/16" up to 7-1/2" high.
  • Mounting holes are 12-5/8" center to center, side to side, top to bottom hole is 5" on center with 1" optional mounting holes in between 1" on center.
  • 12 gauge frame and 14 gauge base plate for strength.
  • Zinc-plated for rust and corrosion prevention.
Check Stock

JAMMY 45 Trailer Swing Door Hinged Cam Bar Lock Hasp Latch Handle Utility Cargo

  • (1) 45" Trailer Door Zinc Cam Bar Lock Kit....
  • Includes: 45" Zinc Hinged Bar, Handle and Hasp....
  • Mounting Holes are Approx. 37" Inside Holes center to center and 43 1/2" Outside Holes center to center... Hinge Plates Are Approx. 36" Apart , Hinge....
  • Hinge Mounting Bolt Holes Are Approx. 3 1/4" Center to Center... Bolts and Fasteners are NOT INCLUDED....
  • Handle Is Approx. 14" Long... Handle Locking Hasp Receiver Is Approx. 5" by 2"... This Item Only Ships Within The 48 US States....
Check Stock

MaxxHaul 70214 Powder Coat Black Trailer Spare Tire Carrier For 10 inch and 12 inch Utility Trailer Tires

  • Holds 4-lug (4 on 4" bolt pattern) and 5-lug (5 on 4-1/2" bolt pattern) trailer wheels and not compatible with 5 on 4-3/4" or 5 on 5" bolt pattern.
  • Mounts on trailer tongues up to 3 inch wide and 5 inch high.
  • Angled and raised mount design makes this ideal for boat trailers as well.
  • Durable powder coat finish to resist rust and corrosion.
  • For use on 10" and 12" utility trailer tires only.
Check Stock

PROGRIP 822820 Truck and Trailer Bed Cargo Tie Down Anchor Removable Bolt, 1/2\diameter x 2\ Shank (Pack of 2)

  • Heavy-duty removable eye bolt that acts as the foundation in tie down technique while moving cargo in your truck or trailer bed.
  • Constructed with zinc plating to help prevent corrosion in extreme weather conditions.
  • sturdy bolts feature a break strength of 2,600 lbs. and a working load limit of 866 lbs..
  • Easy to use and allow ease of mind that your cargo is secure during transport.
  • Unique design of bolt allows user to remove eye of bolt while cover application provides a smooth surface when not in use.
  • Truck and Trailer Bed Bolt measures 1/2" diameter x 2" shank.
Check Stock

2 Pack Rack-Strap Ladder Rack Tie-Down Right Angle Mounting Bracket RS1 Gold Right Angle Mounting Bracket Bolt Mounting Hardware Included 8 Ft Strap

  • Includes 2 complete RS1 tie downs, yellow-zinc plated steel frame, 8' black polyester strap with double J wire hook and bolt installation kits.
  • Right angle mounting bracket for square or rectangular tubing.
  • Zinc and yellow chromate plated for extreme weather protection.
Check Stock

2 Pack Rack-Strap Ladder Rack Tie-Downs Round Mounting Bracket RS3 Gold 2 Inch Diameter Round Mounting Bracket Bolt Mounting Hardware Included 8 Foot Black Strap

  • Includes yellow-zinc plated steel frame, 8' black polyester strap with double J wire hook and bolt installation kits.
  • Curved mounting bracket for 2" OD round pipe.
  • Zinc and yellow chromate plated for extreme weather protection.
Check Stock

BoltHold - SP58 Zinc-Plated Asphalt Anchor 1-1/4 x 10 - with 1.5 Hex Bolt & 2 Washer - Chemical Anchors - for Installation of Sheds Carports Bike Racks & More - 5000 lb Pull Rated - 6 PK

  • ZINC-PLATED ASPHALT ANCHORS: Stop wasting time pouring concrete! BoltHold's industrial in-ground anchors allow you to install anything on asphalt in three simple steps, offering a fast, cost-effective, and reliable solution to asphalt mounting. Measuring 10" long, these SP58 Zinc-Plated Steel Anchors incorporate a 5/8"-11 UNC (coarse) female thread and are pre-installed with a 1.5" long bolt and a 2" diameter washer. Set includes 6 anchors..
  • OUR STRONGEST ANCHOR: Pull rated for 5000 lb! Designed for a very heavy load, BoltHold SP58 chemical anchors resist at least 5,000 pounds pull and 2,500 pounds of high shear force at ground level. Rated for >720 in-lb rotary torque, the anchor's welded spiral offers a strong bond with the grout, while the washer at the top prevents the anchor from dropping below the surface or being pulled up into the mounting plate when tightening the bolt..
  • LONG TERM STABILITY: Creates a stress-free bond that lasts! Due to asphalt's weaker nature, typical expansion-type wedge anchors used in concrete won't hold to the pressure. BoltHold anchors solve this problem by embedding deep into the compacted gravel below the asphalt layer to increase the shear resistance and ensure long-lasting stability—perfect for safely installing....
Check Stock

Elephant Anchors [50 Sets+ Drill Bit] - TV mounting Bolts for TV Mount into Drywall & TV Mount into Metal Studs Dual Use Drywall Anchors When no Studs or anchoring into Metal Studs

  • DUAL USE : NO STUD OR METAL STUD : Mount your TV anywhere, Use when no studs align to the tv mount holes or when mounting on metal stud walls. Best anchors for mounting TV with Tilt or Fixed TV Mounts. Mount up to 90lbs TVs. 50 anchors, screws , washer and drill bit are included..
  • A Revolution in Mounting - Our drywall anchors can be pre-installed without using a bolt and don't fall behind the wall when the bolt is removed. The Elephant anchor provides a secure hold from within various hollow materials 3/8" to 3" thick including drywall, MDF, sheetrock, plasterboard, sheet rock, gypsum board, buster board, and custard board..
  • Heavy Duty Mounting - Perfect for TV mounting and hanging curtain rods, lamps, photo frames, coat racks, flat panel TVs, lighting fixtures, hand rails, grab bars, ADA hardware, shelves, cabinets, barn doors, solar panels, garage doors, sinks, brackets, a shower door, and so much more!.
  • Quality Construction for Quality Construction - Each anchor consists of a corrosion-resistant zinc-plated metal channel.
  • plastic straps attached to the channel that position it into place.
  • and a plastic flange that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material..
Check Stock

2 Pack Rack-Strap Ladder Rack Tie-Down Round Mounting Bracket RS2 Gold 1-7/8 Inch Diameter Round Mounting Bracket Bolt Installation Hardware Included 8 Foot Black Strap

  • Includes yellow-zinc plated steel frame, 8' black polyester strap with double J wire hook and bolt installation kits.
  • Curved mounting bracket for 1-7/8" OD round pipe.
  • Zinc and yellow chromate plated for extreme weather protection.
Check Stock

Powerbuilt 647088 Steering Wheel Puller Set, Black

  • Design to pull steering wheels on most domestic and imported vehicles..
  • Heavy-duty drop-forged steel construction.
Check Stock

CE Smith KEEL Roller/Bracket Assy 5\

  • precision metal stampings, fabrications and assemblies.
Check Stock