Categories

Best boring Bar Spindle

Black Wrought Iron Gate Turn Latch Lock Set 6.5 Inches W Heavy Duty Rust Resistant Powder Coated Barn Door, Fence Or Gate Ring Latches with Mounting Hardware Renovators Supply Manufacturing

  • DURABLE MATERIAL - This barn door gate latch is made of heavy duty industry standard wrought iron material and spindle bar is of standard mild steel. Our exclusive black baked rust resistant powder coating protects the door latch from rust..
  • MEASUREMENTS - The Latchbar length = 6.5 Inches, Turn pull Drop Backplate Width = 2.5 Inches, Projection = 3 Inches, Overall Width = 4 Inches, Spindle Bar = 3 Inches. Opens = Both the direction, Left or Right!.
  • PACK INCLUDES - Black Pull ring drop with flip latch strap, single pull ring, a spindle bar, two Latch bar pieces and the mounting hardware..
  • EASY INSTALL - Place latch on gate, mark all screw holes, mark centre of swing drop, drill centre, insert spindle bar via central hole and connect it to both of the swing drops to function together, install latch using the given screws, and its done!.
  • BUY WITH CONFIDENCE - These sturdy farmhouse gate flip latches are carefully packed to avoid any damage in the transit process. We offer you great value products for your money and a perfect way to spend wisely..
Check Stock

Black Wrought Iron Gate Ring Turn Latch Lock Set 6.5\ W Light Duty Antique Latch Replica Pull Catch for Barn Doors Or Gates with Mounting Hardware Renovators Supply Manufacturing Pack of 2

  • DURABLE MATERIAL - This black barn door gate latch is made of wrought iron material and spindle bar is of steel. Recommend indoor use or apply protective coating for outdoor use. Pack of 2.
  • MEASUREMENTS - The Latchbar length = 6.5 Inches, Turn pull ring backplate width = 5 Inches, Projection = 2 Inches, Spindle Bar = 3 Inches. Opens/Closes = Both the direction, Left or Right!.
  • PACK INCLUDES - Black pull ring drop with flip latch strap, single pull ring, a spindle bar, two Latch bar pieces and the mounting hardware. Included screws are intended for indoor use..
  • EASY INSTALL - Place latch on gate, mark all screw holes, mark centre of ring drop, drill centre, insert spindle bar via central hole and connect it to both of the ring drops to function together, install latch using the given screws, and its done!.
  • BUY WITH CONFIDENCE - These door flip latches are carefully packed to avoid any damage in the transit process. We offer you great value products for your money and a perfect way to spend wisely..
Check Stock

Solid Brass Gate Ring Turn Latch Lock Set 7.25\ L Heavy Duty Twist Latch Replica Pull Catch for Barn Doors Or Gates with Mounting Hardware Lacquered Brass Finish Renovators Supply Manufacturing

  • DURABLE MATERIAL - This bright brass polished barn door and gate latch is made of heavy duty solid brass material. The spindle bar is of standard steel. Exclusive tarnish resistant lacquered finish increases its life for many years..
  • MEASUREMENTS - The Latchbar length = 7.25 Inches, Turn pull ring backplate width = 2.5 Inches, Projection = 1.75 Inches, Spindle Bar = 4 Inches. Opens/Closes = Both the direction, Left or Right!.
  • PACK INCLUDES - Brass pull ring drop with flip latch strap, single pull ring, a spindle bar, two Latch bar parts and matching the mounting hardware..
  • EASY INSTALL - Place latch on gate, mark all screw holes, mark centre of ring drop, drill centre, insert spindle bar via central hole and connect it to both of the ring drops to function together, install latch using the given screws, and its done!.
  • BUY WITH CONFIDENCE - These door flip latches are carefully packed to avoid any damage in the transit process. We offer you great value products for your money and a perfect way to spend wisely..
Check Stock

YG-1 P15202 Spade Drill Straight Shank Holder, Straight Flute, 0.318\ Shank Diameter, 31/32\-1-3/8\ Drill Insert Range

  • ☞This product is the main accessory of coordinate boring machine, horizontal boring machine, ordinary boring and milling machine, boring and milling CNC machine tools. It can be used for boring, boring outer circle, boring end face, boring stepped hole, boring inner hole end face, cutting inner hole and ring groove on outer circle, etc..
  • ☞Precise control and free adjustment: The scale of the dial is clear, and the circle is divided into 100 equal parts. The movement of each scale is 0.005mm, the diameter is 0.01mm, and the operation is simple..
  • ☞Select material with high hardness. Using 40CrMo material, it has strong rigidity, special surface treatment, high hardness, good seismic performance, suitable for high speed, and guarantees the density of hole processing..
  • ☞The boring range of the complete set of boring tools: 10-150mm, and the diameter of the boring tool bar is 50mm. Precision fine-tuning: 0.01mm (one revolution of 0.02mm), adjustable stroke 20mm. The boring bar easily and directly enters the boring head hole..
  • ☞The refined boring bar is made of alloy steel, which has strength and toughness, good hardenability, and no obvious temper brittleness. After quenching and tempering, it has obvious impact resistance. The taper design of the b....
Check Stock

Christopher Knight Home Mia Farmhouse Spindle Back 30\ Rubberwood Swivel Barstools (Set of 2), White

  • Farmhouse style: featuring neutral colors and simple design, this dining chair Set harnesses a lovely Farmhouse style for a natural look. These barstools combine streamlined shapes and clean, crisp lines that emphasize function above all else.
  • Spindle backrest: Bring a Country atmosphere to your home with this classic spindle Back chair. This open spindle design will give any dining room a timeless look.
  • Swivel function: this bar stool brings ultimate comfort to your kitchen or home bar with its swivel function. This makes it easy for you to get in and out of your seat without the hassle of having to move your bar stool.
  • Rubber wood: our wood not only offers Plenty of durability, but it also gives this piece a beautiful natural-grain look. Combined with a gorgeous finish, this wood will truly stand out in any room.
  • Barstool Height: this stool has a seat Height of 30. 00 inches, making this perfect for a kitchen island or a breakfast nook.
Check Stock

PSI Woodworking KWL-1018VS Turncrafter Commander 10" Variable Speed Midi Lathe

  • KWL-1018VS replaces TCLC10VS. ETL Listed and certified by Intertek.
  • Powered by 3/4 hp Variable Speed high performance motor(110V) & an SBC microprocessor. Two belt positions: 500-2000 RPM & 1500-3600 RPM.
  • Headstock Thread 1" x 8tpi. Headstock/Tailstock Taper #2MT. Distance between Centers 18". Swing over Bed 10". Cast iron base.
  • Tailstock & Spindle Bore 3/8". Quill Travel 1-5/8". (24) indexing positions with spindle locking. Convenient built-in handles.
  • See Description below for all of the included parts.
Check Stock

PSI Woodworking KWL-1218VS Turn Crafter Commander 12\ Variable Speed Midi Lathe

  • KWL-1218VS replaces TCLC12VS. ETL Listed and certified by Intertek..
  • Powered by 1hp Variable Speed high performance induction motor(120V-60HZ) & an SBC microprocessor. Two belt positions: 500-1800 RPM & 1950-3800 RPM..
  • Headstock Thread 1" x 8tpi. Headstock/Tailstock Taper #2MT. Distance between Centers 18". Swing over Bed 12". Cast iron base..
  • Tailstock & Spindle Bore 3/8". Quill Travel 1-5/8". (24) indexing positions with spindle locking. Convenient built-in handles..
  • See Description below for all of the included parts..
Check Stock

Machinery Repairman

  • ...able, more accurate rotation and professional. Mini metal lathe power of motor: 550W. The full-length splashguard provides maximum protection..
  • Infinitely Variable Speeds: Power metal lathes has large center distance 350mm(13.78") and swing over bed:180mm (7.09"),spindle bore: 21mm(0.82"). ​Variable speed from 50-2500 RPM. Forward and reverse in all speeds. Operate either manually or with the adjustable auto feed rate. Emergency stop buttom included..
  • Accurate 3-Jaw Chuck: Mini metal lathe chuck, 3-jaw self-centering chuck, for setting cylindrical materials steadily. Backsplash guard included. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.01mm. A free lamp is included..
  • Professional Compound Rest: The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting and bevel cutting by changing the tool post angle and adjusting the compound rest. Professional cross slide is designed with abrasive resistance, moving blades freely with feed rod..
  • Wide Application: Driven by DC motor, this mini meta....
Check Stock

Christopher Knight Home Mia Farmhouse Spindle Back 30 Rubberwood Swivel Barstools Set of 2 Black

  • Farmhouse style: featuring neutral colors and simple design, this dining chair Set harnesses a lovely Farmhouse style for a natural look. These....
  • Spindle backrest: Bring a Country atmosphere to your home with this classic spindle Back chair. This open spindle design will give any dining room a....
  • Swivel function: this bar stool brings ultimate comfort to your kitchen or home bar with its swivel function. This makes it easy for you to get in and....
  • Rubber wood: our wood not only offers Plenty of durability, but it also gives this piece a beautiful natural-grain look. Combined with a gorgeous....
  • Barstool Height: this stool has a seat Height of 30. 00 inches, making this perfect for a kitchen island or a breakfast nook.
Check Stock

NEW 9 pcs 1/2

  • 9 Piece boring bar set features C-6 carbide for use in harder materials but also works great in aluminum and other soft metals All shanks are held to 0.0000-0.0005" from the nominal diameter and made of special heat treated alloy steel. Shank Diameter- 1/2".
  • Contains: (3) pcs. 5/16" minimum bore (1 ea. 3/4" bore depth x 2-1/4" overall, 1 ea. 1-1/8" x 2-5/8", & 1 ea. 1-1/2" x 3").
  • Contains: (3) pcs. 7/16" minimum bore (1 ea. 1-1/8" bore depth x 2-5/8" overall, 1 ea. 1-11/16" x 3-3/16", & 1 ea. 2-1/4" x 3-3/4"), (3) pcs. 9/16" minimum bore (1 ea. 1-1/2" bore depth x 3" overall, 1 ea. 2-1/4" x 3-3/4", & 1 ea. 3" x 4-1/2").
Check Stock

MT2 Boring Shank, Mt2-1-1/2-18- (m10) Manganese Steel Boring Bar CNC Lathe Tool Inch Boring Head Shank Connecting Rod

  • HIGH-QUALITY MATERIALS: The boring bar is made of high-quality manganese steel to improve durability and service life..
  • SCOPE OF APPLICATION: Boring bar for CNC lathes with 1/2 "boring head. It can be used for boring, round, end face, step hole, inner hole end face, cutting inner hole and annular groove on the outer circle, etc..
  • ACCURATE THREAD: The thread of the boring bar is accurate and can be tightly connected with the boring head..
  • EXQUISITE WORKMANSHIP: The connecting rod of the British boring head handle is very smooth, professional and practical appearance design, easy to use..
  • HIGH STABILITY: MT2 bracket is stable, accurate and high stability, very stable during work, and reliable tools..
Check Stock

TECHTONGDA Mini Milling Machine MT3 Mill Drill Machine Benchtop Mill/Drill Milling Drilling Machine Brushless Motor Variable Speed with Digital Readout 110V 1100W

  • ⚒️ The Mini Milling Machine with drilling, milling groove, plane milling chamfering and other functions, suitable for all kinds of metal, wood and other materials fine processing, widely used in machinery manufacturing,woodworking DIY and so on..
  • ⚒️ Machine head tilt, Spindle incline Angle: ±90°(The nose can actually rotate 360 degrees), Spindle taper: MT3, Max. drilling diameter: 0.9"(25mm), Distance from spindle to table: 13.8"(350mm), Spindle stroke: 2"(52mm), Table size: 27.5"*7.1"(700mm*180mm).
  • ⚒️ 1100W Strong Power. The Benchtop Mill/Drill Machine with 1100W brushless motor, Infinitely Variable-Speed, The Range of spindle speeds: 50-2250rpm.
  • ⚒️ Spindle high precision feed, one piece steel handle bar, hand wheel adjustment with fine adjustment switch, high precision machining, accurate to 0.01MM..
  • ⚒️ Widened working table: 27.5"*7.1"(700mm*180mm), artificial fine grinding, integrated casting, T-slot convenient fixture fixation. High quality and Durable..
Check Stock

Rousso’s Reproduction Retrofit Kit Install Your Antique Knobs in Pre-drilled Doors with Our Exclusive Bore Hole Adapter Antique Brass 2-3/8 Backset Passage

  • If you have the knobs, this is the installation kit you need.
  • Includes Rosettes, our exclusive bore hole adapter, latch, faceplates, spindle and all mounting screws.
  • Rosettes are 2-1/2 inch diameter / Steel plated with a rich antique brass finish.
  • Standard Spindle Dimensions: 3 1/2" L x 9/32" thick. 20 TPI.
Check Stock