Categories

Best test measure inspect

ABN Deluxe Antifreeze and Coolant Tester Hydrometer Tester – Automotive Antifreeze Tester for Ethylene Glycol Coolant

  • The large rubber bulb and 5.5-inch (14 cm) rubber tube makes it easy to suck liquid into the small plastic reservoir.
  • Easy to read stickers allow you to test the solution and provides instructions.
  • Flush out with water after each use for accurate readings.
  • CLEAR TESTER FOR VISUAL INSPECTION: As a bonus, the clear reservoir allows you to inspect the condition of the antifreeze in your vehicle.
  • Easily inspect color and for any rust, sludge, or other sediments.
  • EASY TO READ HYDROMETER SCALE: The clear capsule contains sensitive pointers that measure the freezing and boiling points of the liquid in both Celsius and Fahrenheit.
  • These pointers are easier to read than standard coolant test strips because you do not need to focus on the color or PH balance to understand the freeze and boiling points of your solution.
  • One side of the tester is labeled with freeze point scale while the other side is labeled with boiling point scale.
  • COMPATIBLE WITH ALL ETHYLENE GLYCOL ANITFREEZE: Works with all ethylene glycol coolants including GM Dex-Cool.
  • This tester provides immediate results on the freezing and boiling points of your coolant to water mixture.
  • Use vehicle manual and geological location to decide on the best ratio for your ....
Check Stock

Mornajina Dial Indicator with Magnetic Base 0-1.0 Tester Gage Dial Test Indicator 0.001 Precision Magnetic Dial Indicator Base Holder with Fine Adjustment

  • ...iameter. 2" Flat back or lug back option included (hole size 1/4”, 6.3mm). 9" Height Magnetic base, on and off switch. 2" width X 2-1/2" depth Base measures. 22-pieces indicator point set: AGD specifications (4-48 threads)..
  • 【Wide Application】: Applicable to various comparative measurements in the workshop and inspection room. It can be used with machine tools, equipment, and other measuring equipment to compare two heights or distances between narrow limits, to determine the errors in the geometrical form, to take accurate measurements of deformation, to take determine positional errors of surface, and to check the alignment of lathe centers..
  • 【Package Includes】: 1 x 0-1" .001" Dial Indicator, 1 x Magnetic Base Holder, 1 x Orange Hard Plastic Case, 1 x 22-pieces Indicator Points Set. Great Dial Indicator with Magnetic Base and Point Precision Inspection Set. (NOTE: 100% satisfaction guarantee. For any problem for this item, please don't hesitate to contact us, we will reply you within 12 hours.).
Check Stock

DUOYI Ground Digital Insulation Resistance Meters, 0-2000 Ohm DCV ACV Meter Megohmmeter Megohm

  • The ground resistance tester is a commonly used instrument for testing and measuring ground resistance. It is also a common tool for electrical safety inspection and grounding engineering completion acceptance. This product is suitable for grounding resistance measured by electric power, post and telecommunications, railway, petroleum, chemical, communication, mining as well as measuring low resistance conductor resistance..
  • High precision: Three-wire resistance compensation test method can eliminate the influence of lead resistance. Fast response: Display measurement data in approximately 5 seconds..
  • Withstand voltage protection: Grounding voltage file, can withstand 300VAC (1 minute), grounding resistance file, can withstand 200VAC (10 seconds)..
  • Three-speed measurement: 0-20 ohms (resolution 0.01 ohms), 0-200 ohms (resolution 0.1 ohms), 0-2000 ohms (resolution 1 ohm).
  • Indicator light guide:Power and Wiring indicator to guide the user to use correctly, power light: power indicator. Green light:Checking the test line correct or not, the 6th 5th battery installed correctly or not..
Check Stock

LC200A Inductance Inductor Capacitance Capacitor L/C Multimeter Meter Tester

  • This MESR-100 V2 auto-ranging capacitor ESR and low Ohm meter measuring range is 0.001-100.0R, support in circuit testing..
  • It is the series resistance inside the capacitor, and 100kHz is used to remove the impedance 1/(2*pi*F*C). When the impedance becomes smaller, the real series resistance value can be measured to determine whether the capacitor is bad/damaged or in good condition..
  • Our ESR meter only applies less than 15mV DC or peak to peak on a good capacitor, as a result we can use it as in circuit test..
  • During repairing TV, LCD, Audio board, etc. we can in circuit testing the capacitor is good or not.【Note:The Capacitance Meter is used for testing the internal resistance of the capacitor, not for testing capacitance value.】.
  • Dual terminal, for fast and easy inspect general capacitor or resistor, a printed ESR table for fast check.Equipped with a SMD alligator clip for more accurately testing..
Check Stock

Portable Solar Tester Meter, Tint Solar Film Car Transmission Meter Filmed Glass Tester UV IR Rejection Meter Spectrum Tester IR 950nm UV 365nm VR 550nm

  • 【Features】Compact, portable, battery powered, ultra-low power consumption.
  • 【Test degree】The testing slot is up to 8mm, can test filmed glass directly.
  • 【Full Functioning】UV transmission meter, IR transmission meter, Light Transmittance Meter, Three functions in ONE device.
  • 【Simple Operation】Rapid measurement, putting the testing sample in the "OPENING", UV, VL and IR transmission values of the sample will simultaneously display immediately.
  • 【Suitable for】Measure film, filmed glass, window tint, side windshield etc. Test for performance demonstrate, production, QA, inspection and so on many occasions.
Check Stock

MESR-100 Capacitor Tester, Geevorks ESR Meter in Circuit Capacitor Tester Up to 0.001-100.0R, Auto-Ranging Ohm Meter

  • This MESR-100 auto-ranging capacitor ESR and low Ohm meter measuring range from 0.001 to 100.0R, support in circuit testing..
  • Capacitance meter is a series resistor inside capacitor, using 100kHz to remove the impedance 1/(2*pi*F*C).The impedance become small, and we can then measure the true series resistor value..
  • Our ESR meter only applies less than 15mV DC or peak to peak on a good capacitor, as a r-esult we can use it as in circuit test..
  • Dual terminal, for fast and easy inspect internal resistance of the capacitor, a printed ESR table for fast check..
  • Note:The Capacitance Meter is used for testing the internal resistance of the capacitor, not for testing capacitance value.[Note: without SMD test clips].
Check Stock

Signstek MESR-100 V2 Auto Ranging in Circuit ESR LCR Meter Capacitor / Low Ohm Meter Up to 0.01 to 100R, Support in Circuit Testing

  • Using true 100 KHz sine wave to measure the ESR value, which is equal to the testing method of capacitor manufacturer..
  • Dual terminal, for fast and easy inspect general capacitor or resistor, a printed ESR table for fast check..
  • Measuring range from 0.001 to 100.0R, support IN CIRCUIT Testing..
  • Auto-ranging capacitor ESR and Low Ohm Meter..
Check Stock

AMTAST Professional Surface Roughness Tester Metal Surface Roughness Gauge

  • The Surface Roughness Tester AMT211 complies with international standards ISO, DIN, ANSI, JIS. Users-friendly system and intuitive menu navigation, Multi-direction measurement such as lateral and upsid..
  • Sensor can work in the meter, also can work independent through 1.0m length cable (Max can be 3m)..
  • Affordable Touch screen & button operational Surface Roughness Tester. Roughness parameters: Ra ,Rz, Rq, Rt, Rp ,Rv, R3z, R3y, Rz(JIS), Rs, Rsk, Rsm, Rku, Rmr, Ry(JIS), Rmax, RPc, Rk, Rpk, Rvk, Mr1, Mr2, resolution 0.001 micron. With bluetooth, also can by app to connect with mobile phone..
  • Calculation results, assessed profiles, bearing and amplitude curves can be displayed. DSP chip controlled achieves high accuracy and fast testing speed, easily connected to PC & Printer.
  • Wide Application: This portable Surface Roughness Tester allows surface roughness measurement both on metal and non-metal workpieces. It is suitable for machining and manufacturing, quality control, inspection departments, especially for measurement on large and heavy workpiece, assembly line on site. The AMT211 is a Non Destructive Testing instrument, damage won’t be caused when testing piece..
Check Stock

MR CARTOOL Portable Solar Tester Meter, Tint Solar Film Car Transmission Meter Filmed Glass Tester UV IR Rejection Meter Spectrum Tester IR 950nm UV 365nm VR 550nm

  • Compact, portable, battery powered, ultra-low power consumption.The testing slot is up to 8mm, can test filmed glass directly.
  • UV transmission meter, IR transmission meter, Light Transmittance Meter, Three functions in ONE device.
  • Simple operation, rapid measurement, putting the testing sample in the "OPENING", UV, VL and IR transmission values of the sample will simultaneously display immediately.
  • Suitable for measure film, filmed glass, window tint, side windshield etc. Test for performance demonstrate, production, QA, inspection and so on many occasions.
Check Stock

RockRose Portable Solar Tester Meter, Car Window Tint Solar Film Car Transmission Meter Filmed Glass Tester UV IR Rejection Meter Spectrum Tester IR 950nm UV 365nm VR 550nm

  • Compact, portable, battery powered, ultra-low power consumption.
  • The testing slot is up to 8mm, can test filmed glass directly.
  • UV transmission meter, IR transmission meter, Light Transmittance Meter, Three functions in ONE device.
  • Simple operation, rapid measurement, putting the testing sample in the "OPENING", UV, VL and IR transmission values of the sample will simultaneously display immediately.
  • Suitable for measure film, filmed glass, window tint, side windshield etc. Test for performance demonstrate, production, QA, inspection and so on many occasions.
Check Stock

Datalogic Falcon X3+ Mobile Computers

  • This digital pen instrument is an ideal instrument for any aquarium, fishery, swimming pool, school laboratory, food and beverage, etc. Moreover, this digital water quality tester is ideal for all basic water testing applications..
  • Due to its advanced microprocessor technology, the product is efficient and accurate..
  • The value of water quality inspection pen can show the impurity content. The larger the value, the greater the impurity content.
  • on the contrary, the less impurity content..
  • The factors that affect the test value are: the temperature of the water (the tester cannot test high-temperature water, such as boiled water).
  • the flow rate of the water (the tester cannot be used to test flowing water) Hold function: save the measurement for easy reading and recording..
  • Auto-off function: After 10 minutes of non-use, the meter can be turned off to save battery power..
Check Stock

Annual Vehicle Inspection Report (Shrinkwrapped Snap-Out Format, 3-Ply Carbonless, 8.5

  • Annual vehicle inspection form helps you meet DOT annual vehicle inspection requirements under 49 CFR Section 396.21. Annual inspection label helps you satisfy DOT annual vehicle inspection requirements under 49 CFR 396.17(c)(2)..
  • Annual inspection form and label combo is shrinkwrapped and packaged for retail with front & back inserts and hang tab..
  • Annual inspection forms include Minimum Periodic Inspection Standards (49 CFR Part 396, Appendix G to Subchapter B) on the back of the forms to reinforce the vehicle inspection requirements..
  • Durable, 100-lb. manila ply helps preserve the annual vehicle inspection report for future reference. Annual report comes in a snap-out format with 3-plies, carbonless and measures 8.5" x 11.75"..
  • Vehicle inspection label is 2-ply vinyl with mylar laminate and measures 5" x 4"..
Check Stock

Annual Vehicle Inspection Report Form 25-pk. (Snap-Out Format, 3-Ply Carbonless, 8.5

  • Annual vehicle inspection form helps you meet DOT annual vehicle inspection requirements under 49 CFR 396.21. Annual inspection label helps you satisfy DOT's annual vehicle inspection requirements under 49 CFR 396.17(c)(2)..
  • Annual inspection form includes Minimum Periodic Inspection Standards (Part 396, Appendix G to Subchapter B) on the back of the forms to reinforce the vehicle inspection requirements. Durable, 100-lb. manila ply helps preserve the annual vehicle inspection report for future reference..
  • Annual vehicle inspection report comes in a snap-out, 3-ply format (original, duplicate, vehicle copy) and carbonless. Measures 8.5" x 11.75". Bundle includes 25 forms..
  • Vehicle inspection label is 1.6 mil aluminum with permanent adhesive and measures 6" x 3.5". Permanent indentations mark the label. Markings cannot fade in sunlight or wash off label. Bundle includes 25 labels..
  • Reduce chance of fines by identifying the vehicle was inspected. Vehicle inspection sticker is designed to be affixed directly on the inspected unit. Label features a three year date range - current year followed by the next two years..
Check Stock